Jump to content
SAU Community

Dose Pipe Sutututu

Members
  • Posts

    15,262
  • Joined

  • Last visited

  • Days Won

    363
  • Feedback

    100%

Everything posted by Dose Pipe Sutututu

  1. I'm going to be honest with you here, no idea 😅 Just I know with SR20 VCT motors, you pull the VCT super quick with stiffer valve springs, in RB25s however there's no talk of grenading VCT units.
  2. Stock valve springs & Japanese branded valve springs are junk (waits for every American to have a sads) Straight up go Supertech or Performance Springs or Kelford Valve springs in the 80lb flavour.
  3. Just had a look at prices, you're correct! Damn, I'm out of touch with car part prices these days lol.. I've had the same clutch in the R33 since when it made stock power till when the motor went bang at 400kW+
  4. NPC 10" single plate organic will be more than enough with that power output.
  5. The bow is dangerous to the white people, he or she, inexperienced will head butt each other.
  6. My advice, get a 135i or 335i. You get so much more car for your money, just do the water pump every few years and you'll be fine.
  7. If you're going to be pushing and punishing the car on the street and sometimes at the track, I would step it up a notch and go Elig Sports pads.
  8. Thanks @niZmO_Man I would recommend Intima SR brake pads, the SS although quiet and low dust will struggle to keep up with a a GT-R especially if it's the non V-Spec R32 which just has 296mm front brakes (same as the R33 GTS-t). I can help supply rotors, pads & HEL lines - just PM
  9. Sold money directed to a case of 150 Lashes
  10. @PranK time for a Samsonas, that will fix it.
  11. What times did you get @PranK?
  12. Do you have a wideband? I wouldn't be surprised if it's a misfire due to a lean condition. At 1.3bar of boost, 0.6mm gap and Splitfires are a walk in the park. You could run 0.8mm gap and still be fine.
  13. Well at least you have a crank case breather now, we all know RBs love to pressurise the crank case and not allowing oil to drain effectively back into the sump. Time for a 3.2L 1000hp motor?
  14. Hellos, I sell parts from R33 S2 GTS-t boat scrap bin. Intake pipe from grenade to AFM Power steering reservoir Coil pack / valley cover Plazmaman Hotside pipe, modified to suit Hypergear ATR45SAT on stock manifold & elbow welded on Location: Cabramatta, NSW 2166 Price: $50 for the lot
  15. Clearly English isn't my first language lol... I only read the part it shuts off when hot and he can't start it again, so I assumed the non-start scenario only occurred when the motor was hot.
  16. Get a wideband first, install it then log down what your AFRs are when it starts fine. When idles cold, when it idles warm and when it's about to die.
  17. Sounds like that "shop" you took it to needs to go back to school. What ECU are you running? do you have a wideband O2 on installed? What are the AFRs like on idle
  18. When's the big single turbo going on? https://www.spoolinboost.com.au/ls1turbokits
  19. And at the end of the day, twins are aids. @djvoodoo has converted from aids to cool.
  20. Don't forget your crew in uniform too Looking forward to the build!
  21. 1000hp street package, Samsonas, MoTec M1 dis dat.
  22. Very beefy looking, have a mate that also just ordered a set of customised Shockworks coilovers for his R33 boat. Pretty keen to see how it compares to my dinosaur MCA X-Rs.
  23. Well you have a Kebabtech 2500 do you not?
×
×
  • Create New...