Jump to content
SAU Community

Dose Pipe Sutututu

Members
  • Posts

    15,253
  • Joined

  • Last visited

  • Days Won

    362
  • Feedback

    100%

Everything posted by Dose Pipe Sutututu

  1. I will need to ask my tuner, but aren't you in a different state?
  2. Yeah, heard 95% of his tuning work is on SR20s - not sure why he wants to tune this shit box Not yet, just ironing out some small issues, need to finish off the exhaust then fit a 100mm Plazmaman cooler - then it's show time. I think I'm getting massive fuel pulsation at around 3500rpm which is causing a misfire, however the fuel pressure (logged) doesn't show any fuel pressure fluctuation. Will move the Radium FPD higher up towards the rail and see if that helps.
  3. Hasn't seen any dyno time, but I'm sure no rods will bend #becausebuiltmotor Has pretty relaxed timing of 13 at peak torque and 16 up top at 1.3bar boost. Rev limiter set at 8500rpm ?
  4. I've been told by several people multiple times that Haltechs make motors turn backwards and that you need a pile of boxes to make it work.
  5. Don't worry man, good things take time. Took me 1.5 years to build my motor and now there's a leak with the sump, probably be another 1.5 years till I fix that.
  6. Yeah but it's still shit, because I didn't use Pierburg and an Emtron. Nah, it's not race pedigree enough. Doesn't have an BW EFR and a PPG/Samsonas.
  7. No exciting update besides me trimming up the carpet this morning lol. Will get another piece and redo it, this was just a trial run. Kind of tempted to make a new false floor and use marine carpet but yeah a project for 2021.
  8. Family and Life comes first, cars come somewhere ninth or so.. no need to be sad. I bought a Tiguan instead, forgot I even had a project car.
  9. Exciting when you buy new parts, then try to fit them and realise they don't work LOL PRP R35 Coil Kit - loom doesn't work, Herman changed the design for the kit but didn't get his wiring team to update the harness ? All good, top bloke is sending me a new harness this week.
  10. Herman's design (Platinum Racing Products) fit under the OEM covers as you're supplied with new insulators. Haven't fully fitted mine yet because the harness made was cocked up lol. He reversed one coil but didn't leave enough slack on the harness lololol.. All good, replacement harness out this week.
  11. Pretty much, I would just run the stock plenum with a Plazmaman style or genuine plenum (if looks is what you're after) and spend that money on a decent turbo setup and cams.
  12. if you want response you're going to need a twin scroll, twin gate, divided rear housing setup. ITBs don't just magically give you unicorn response, what you do get is a tiny bit better transient response. Also On a RB20 going to a RB26 ITB you're going to actually degrade your mid range torque as well, and the bonus a laggier turbo.
  13. A little bit yesterday, they seem to be pretty grippy when not even warm and the noise is still much quieter than how the car was before with cooked wheel bearings all round. Has all new wheels bearings, new traction rods, new ball joints, new alignment so yeah - it's pretty quiet. Should be exciting once it's running properly, just spent all of yesterday night working out why the A/C wasn't triggering and when I earthed the input pin going into the ECU the FICD relay kept clicking and why that pin was actually drawing current. Turns out I didn't connect up the A/C thermister and for whatever reason that affects the entire A/C circuit. I was so tempted to just hook up an AVI into the Haltech and use a flick switch to enable the A/C lol Race Car life, needs AC Oh yeah, alignment specs for those wondering Front 7 degrees of caster 1mm toe out each side -2.5 degrees of camber (turned out that way due to height) Rear 5mm extended traction rods 0.5mm toe in each side (didn't go 2mm like before, as I'm hoping the traction rods will stop the ramp) -1.5 degrres of camber
  14. New alignment ✔ New tyres - Nankang AR-1 in 265/35/18 ✔ New rotors - DBA4600 T3 ✔ New pads - Intima Type-D v2.0 ✔ New buckled guard - ? Car does drive nicer and relaxed the caster a bit, had 8.5 degrees before which was a bit too extreme. Has 7 degrees now, and less strain on the LCA bushing. Guard buckled when I was rolling them to get the car to clear the 18x9.5 +20 wheels with 265mm section tyres all round.
  15. You'll be surprised at some tunes I've seen from "big shops" setup incorrectly
  16. By default the setting is left at 180km/h for both Speed Limit 1 and 2.
  17. Get 100mm since you're spending that money and already aiming over 400kW I used to get really good deals on Plazmaman parts for SAU members but a few dickheads tried to stuff me around so unfortunately unable to help. However if you need parts contact my mates at Yez Racing and they will be happy to help. Just say you're mates with Johnny the guy with the homo looking R33 shit box.
  18. Has the gearbox ever been overhauled? Many things could contribute to this, from worn bearings to worn synchros, etc. Something simple, try flushing the box and popping in fresh fluid. If the box is pretty much on it's way out, then potentially use Redline Shookproof to mask up the problem and drive it till the box goes bang. (That's what I'm doing).
  19. Nah doing it wrong... you need to fit up a Samsonas sequential box, and an ECU such as an Emtron because other ECUs such as Haltech, MoTec, Link, Adaptronic, etc. are believe to be junk by many members here.
  20. Then you go remove your airbag because you don't want to die, just to be defected by the cops and fail your inspection LOL... can't win.
  21. I don't believe the R33~34 Skylines would be affected by the Takata airbag recalls as they're simply just too old. It appears they affect cars from 2008 onwards.
  22. it's good they banned powerful cars for Provisional license holders.. I can tell you, when I was on my Provisional license and had a RB swapped 180SX I wasn't the most sensible person in the world.
×
×
  • Create New...