Jump to content
SAU Community

Dose Pipe Sutututu

Members
 View Profile  See their activity

  • Posts

    15,242

  • Joined

  • Last visited

  • Days Won

    362

  • Feedback

    100%

 Content Type 

Everything posted by Dose Pipe Sutututu

  1. Dose Pipe Sutututu
    cam cover leak dribbling down? hastag RBLIFE lol
  2. Dose Pipe Sutututu
    drop the pressure on your fuel reg then? easy
  3. Dose Pipe Sutututu
    buy a cheap fuel pressure gauge & T-piece.. see what your base pressure is at... less work than putting out the fuel pump and putting in the stock one. report back once done
  4. Dose Pipe Sutututu
    For the price + postage to land them here in Australia, you might as well get a Plazmaman core OR just a Hybrid/HDi core. FWIW, I'm using a cheap shit ling long dim sim HDi core from my motherland and it works a treat. I'm smash about 1.5bar into the motor most days and the intake air temp sensor never measures more than 34 degrees.
  5. Dose Pipe Sutututu
    betches love photos Just spent 20 minutes at work digging up photos off my phone for you
  6. Dose Pipe Sutututu
    Walbro E85 pump, they're quiet and seem to be pretty reliable. One of my mates have had his DW300 fail but another one still has one going strong. Mind you both bought the DW pump before the Walbro E85 450L pump was available.
  7. Dose Pipe Sutututu
    And screw in more boost!
  8. Dose Pipe Sutututu
    Lazy timing, loads of boost and E85 I'm putting 1.5bar into my stock motor, hasn't popped yet. Will go to 1.6bar once I sort out this misfiring issue.
  9. Dose Pipe Sutututu
    Depends how much power you want, but I would say 660cc injectors won't get you far. I'm using 875cc injectors and I'm at 92% duty cycle with a Hypergear SS2 turbo. But if you're getting the E85 itch just drop in 1000cc injectors and a Walbro 450 E85 pump.
  10. Dose Pipe Sutututu
    Sell your car, buy a turbo charged car. More economical
  11. Dose Pipe Sutututu
    lol... was going to say, wasn't on there for long
  12. Dose Pipe Sutututu
    how's the software like? never played with a Wolf 3D - but it can't be that bad right? I've tuned a few adaptronic semi sequential ECUs and they idle like stock with lean AFRs and none of this hard to start, stuttering business.
  13. Dose Pipe Sutututu
    do they really need 2x turbos too? lol just a single twin scroll would have been better
  14. Dose Pipe Sutututu
    Does it always start easier with the water temperature sensor disconnected? (the one to the ECU not the dash) Could be your cranking tables are too lean OR injectors are clogged and spraying less fuel than before with low pulse widths.
  15. Dose Pipe Sutututu
    Sounds like your fuel cut recovery point might be on the high side causing it to do that. Since you're taking it back to unigroup let them fix it, if not I'll give you a few pointers on what to do to try and fix your issue
  16. Dose Pipe Sutututu
    Of course you can! Just download it, choose the right car/tyre settings and upload your logs. You'll need to trim the logs though so it's only one WOT run in 3rd or 4th. I tried to upload an entire log and it turned out like a mess lol
  17. Dose Pipe Sutututu
    Correct, it's externally gated off the housing and running the stock manifold.
  18. Dose Pipe Sutututu
    Yo Lithium, logs attached! Looks like I get: 1.1bar at ~3600rpm 1.5bar at ~4300rpm However like I said earlier, my gain is set pretty low Also here's a virtual dyno print out, not sure how accurate this is either lol 9-18-2014_2011.xlsx
  19. Dose Pipe Sutututu
    how have you plumbed the vac lines on the gate? I prefer this setup for good boost control (remember to set your EBC for external gate or else it won't work):
  20. Dose Pipe Sutututu
    For 98RON I tend to make timing lazy to get it to spool harder, but with E85 I just smash in as much timing as possible to produce the most torque as possible for that RPM. More torque = more exhaust flow, however all my experimentation is usually graphed in Virtual Dyno or "feel".. will be hiring a dyno soon to finish off my tune. Here's my current timing map, quite a bit of timing through the motor - but she loves it.
  21. Dose Pipe Sutututu
    another reason why some tuners prefer running lower timing as the car comes on noise to increase EGTs to get the turbo moving
  22. Dose Pipe Sutututu
    yo Lithium, if you want I can do some logs tonight and send them to you Also I do have my gain set conservatively on the EBC - I find on the track it does like to spike a little thus my boost might seem a touch laggier. I know I can get 1bar around 3500~3700rpm - just can't remember exact numbers...another thing to factor in E85 will make turbos a little lazier as the EGTs are lower but highly doubt it's noticeable lol
  23. Dose Pipe Sutututu
    There's part of your problem
  24. Dose Pipe Sutututu
    1.5bar
  25. Dose Pipe Sutututu
    go SS2 with the external hanging off the turbo.. I get full noise around 4100rpm in 3rd and it's on E85.. it is a touch bigger.. I would say 3076R size, but a touch more responsive. hasn't seen a dyno yet, but Virtual Dyno tells me my shit box is making 317kW lol... however other cars have made over 350kW on stock cams with the same turbo. I bash mine around the track quite often but takes getting used to.. the massive surge of power usually gets the car sideways (even with a 2 way).
×
×
  • Create New...