Mumbo#5

anything holden sux.. the reason i say this is cause they say its ozzie.. but pfft got engines from outside australia? they do.. scammers

i bought a set of crower conrods.. told they were pretty good but i got them foo 1595 so it was a good price.. dont know much about the quality but they look really well machined and compared to the stock 25det rods... lol.. no comparison my 2c

Hi all I was just wondering what the general consensus is of how much you would pay to have an exhaust manfiold machined? I've spent 2.5k at a machine shop you rekkon they would chuck it on the planer for free? Im gonna try at least cause we use this particular machine shop for our heads etc. Anyways.. how much? Cheers guys

thanks guys.. i think ill just try coventry and if they dont have them jig something up outta the old shed.. should do the trick. thanks again

sounds like to me exactly what I had.. cracked manifold which will be around the collector.. but if your lucky its just a gasket Food for thought

anyone out there know??

Can someone quickly tell me if the spigot bush is meant to sit flat with the flywheel or is it meant to go in so it bottoms out on the lip inside the input shaft area? Thanks in advance

well, because I am missing one and because they look stuffed..

Hi all Just wondering if any of you know what part number or where I can get the little washers that space the inlet manifold from the collector of the manifold. I have used the search but havnt found anything on them. Posted is a pic of the washer that I am takling about (from the manual) Thanks in advance edit: the things circled in red are what I'm trying to describe

1.1 bar... damn.. I run mine on .9 and have made 200odd rwkw.. only has slight shaft play on the exhaust side after 138k on the clock..

do they have to be for the RB25 or just any nissan one will do? Or which engine do I order one from? Thanks in advance

Hi all Just wondering if anyone knows where I can get the half moon oil stopper thingos from. They are to the rear of the cylinder head and 1, yes 1 got lost on the way to the engine reconditioners.. Any help would be muchly appreciated Thanks in advance

how much are u asking bass junky?!!?

how much are u asking bass junky?!!?

yer i had one of the OS-giken twins and must say it was easy to drive and hookep up reallll well.

be careful when filling ur fuel tank up too... stactic will light up fuel vapours.. so make sure ya grounded!

So which would I need to be exact. As I dont want to f**k around repco as they are our main parts supplier for work hehe. RB30DET?? RB30DE??? Thanks in advance

Hi all Ive recently discovered that my clutch is a strange OS giken item. On the pressure plate it has OS and CD-2 stamped on it. Can anyone tell me from this where to get replacement pressure plates and clutch plates etc for these and how much they are worth? On another note, when putting it back together I will need some way of aligning the 2 bastards up. Does anyone have any idea of a tool I could purchase or if someone has an input spline of the like lying around I could use it would be muchly appreciated Thanks in advance P.S. It is a spring hub type plate edit: spelling

im guessing you dont use the intranet much... CAPS is bad.. but in answer to your question.. im not entirely sure

Hi all I got the spigot bush sittin infront of me and was wondering if any of the RB30 spigot bushes will be the same as the RB25 cause repco dont know sh!t about imports other than, ohh ill call gary rogers (nissan i think ) So is there an RB30 one you can get that will fit? Cheers all and thanks in advance

make sure u still have ur filler cap ... and i hope you dont mean free revving it cause you dont get boost free revving the engine??

i had the same problem... but since im pretty lazy i just by-passed the heater section with a hose joiner.. tempory fix but eh.. u could always do that to save urself some $$$

bump? anyone????

Hi all I was just wondering what input shaft i could go and get from the wreckers to suit my skyline as Ive heard that there are ones that will work like the 180b input shaft and maybe rb30 VL's and pintara's.. is this true? I need an input shaft so I can align my twin plate clutch properly... Cheers guys and thanks in advance.