Chef_32

i have them, but the trim is pealing cos of the sunlight on them. I assume you are after clean ones??

no probs, where you located?? I heard of a new wrecker in my area, i can find out for you if you are in melb.

i thought the HA were damper adjustable?? where are you located?? anyway, just to clarify... The fronts will fit all r32, r33, r32, z32; they all have a 2 stud top, and the eye hole base, only minor diff may be the height could be a couple of mm different, but it doesn't matter cos they are damper adjustable. The rears have a Fork bolt setup at the base and thus will only bolt striahgt onto the r33gtr, r34gtr, and r34gtt (most). These are too long for the rears of r32. They will not fit r33 gtst cos they do not have the eye hold base as in the front. However, they can be easily modifies to suit r33 gts-t, s14, and s15 by welding on the eye hole base of the stock shock onto the tein. This is how the manufacturers do it in the first place and is not a big deal as long as its done properly.

I got gtst doors in Melb. no glass or trim. asking $180 each. in burghandy.

I got one GT badge, red and white off my r32 gts-t. its yours for $25. i'm in glen waverely, vic. can post if need be.

Item: Clarion in-dash motorized 6.5inch Color LCD TV screen (TVX6651) 3 Month old 6.5inch motorized screen with tv tuner, very rarely used. To use the tv tuner you need an antenna which costs about $10. I never wanted to use tv though so never got it. The screen is in absolutely perfect condition, guranteed not to have a single scratch on the face of the screen and no noticable marks on the front folded in face either. The screen has a lot of adjustable settings that you wont find in cheaper brand monitors such as the motorized ebay ones etc such as brightness etc. Has two av inputs, so you can hook up a dvd player or something as well as a reverse camera etc. Also has a video out for additional monitors to be hookd up. Stereo input terminals are also on the front panel so you can feed in a camera/laptop or ipod or whatever. The tv tuner has manual and automatic tuning and a total of 12 preset stations. The video output is excellent and has all the standard settings such as widescreen etc. Screen plays all dvds/videos pal/ntsc etc. It is an Australian model not overseas. Included are all the wires needed as well as remote control and the mounting bracket which i never used and face panel which also i did not use. it will sit better with the plastic sorround face panel and look better, but I cant use it as i have a headunit underneath. Also included are the extra little screws etc. that you require if using the bracke and ofcourse manual. sorry the original box is missing, I will try to find it if possible. Demo welcome in Melbourne. pics @ http://photobucket.com/albums/a165/chef_32/clarion%20screen/ Location: SE Suburbs, Melbourne Item Condition: Excellent Reason for Selling: Upgrading to touch screen/moulding it into dash.. Price and Payment Conditions: Will post interstate at buyers expense. Prefer direct deposit or COD can be arranged as well. $600 ono. still goes for around $1200 at autobarn today $600 ono, highest offer so far $500 which im considering Extra Info: google it. Contact Details: pm, emai: giddyup_24@hotmail.com, mobile : 0413934330

no probs. good luck.

how much machining has been done?? how thick are they now?? take $200 posted to melb??

i have a set of king springs for r33. lows. asking $180 for the set of 4. In melb.

i can do $240 for a safc 1 blue screen if you are interested.

i got stock set aswell. In melb.

i got one in melb. but i got no idea whats involved in getting it out. give me some info on what exactly you are after and i'll see what i can do.

more pics now available upon request. need an e-mail address to send to cos pbase account full.

i got a set of lows. Kings. asking $180ish +post. i'm in melb. Glen Waverley.

i got one in melb. Where are you located? Mines turbo back, custom with custom split dump, carsound 3" cat, and fujitsubo muffler. Very quiet, sound great.

where did you get this seal up stuff??

thanks for that. i'll look into this seal up stuff. I'm just converned that the galleries are going to get covered in this oil/water crap, and everything will need to be cleaned. Maybe some sort of engine flush could do it. will get the car looked at by a pro on monday. Till then, any other feedback would be of a great help.

i have the apexi bov. But the red ring used to change the release holes has been sanded down to make it less noticable. Can you throw in the cooler pipe aswell?

Hows it going. NOTE: QUESTIONS BELOW IN BOLD FOR THOSE LAZY PEOPLE My dad got an old 91 mazda 929 with a DOHC v6. It started running like crap (no pickup, no power, engine shaking) the other day so i diagnosed spark plugs after finding out my dad hadn't changed them in ages. So i take out the plugs on the drivers side bank and they turn out worn and there was also some residue on the leads. I change them and then move over to the passenger side bank. I take off the intake pipe, get the leads out and they have a blown, wet, gooi looking substance on them. All three plugs on that side came out with this crap. I changed the plugs with new ones anyhow. Then i start looking for other signs of this substance to confirm that it is oil and water mixed. i find some in the airbox where the blow by has brought it in. the coolant level was low a few days earlier and this was topped up, as was the oil. The car runs much better with the new plugs. SO NOW I'M PRETTY SURE MY DAD HAS A BLOW HEAD GASKET. WHAT I WANT TO KNOW IS: 1: IS A REBUILD DEFINATELY INVOLVED? 2: CAN JUST THE GASKET BE CHANGED WITHOUT A FULL BUILD? 3: WHAT HAPPENS IF THE CAR IS STILL DRIVEN? 4: IS IT CHEAPER TO DO A TRANSPLANT THAN GET IT FIXED?? any help would be great

location??

For sale: For sale: Apexi Power Fc PFC SR2016 020- 0104 Suits s14a ( no controller) $680 Power Fc Boost Kit ( Sensor and Solenoid ) $340 King Springs suit s13 : Super low front, low rears $180 King Springs suit R33/34 : low front, low rears $180 Z32 300zx stock rims no tyres (no damg but look crap) $180 Safc 1 Blue Screen $260 Vafc 1 Blue screen $260 AFC Stand $30 HKS EVC 4 $350 ARC Sidemount from RB20 $250 Bosch 040 intank fuel pump Brand New $240 Ohlins shocks and Eibach springs suit front Skyline (any) Height adjustable (6-8 levels of circlip adjustment not coilover) $500 Damper adjutable 36 levels. Have been shock dyno'd Excellent condition, have dyno graphs Highest Quality Rb20 Stock Turbs Good condition, no shaft play, no chips $250 R32 gts-t 92 stock front seats (1 cig burn in drivers) $250 Blitz Boost Gauge 52 mm with holder $150 Apexi dual chamber? BOV $180 HKS Gauge Combo (80mm boost, 43mm Temp, 43mm Pres) $450 Mechanical. S15 stock dump back exhaust $150 Extra Info: Gauge pics : http://www.pbase.com/chef_32/gauges Electronics pics: http://www.pbase.com/chef_32/electronics More pics soon or on request. These are not all mine, some stuff is on sale for mates. Need cash for starting business and new car. Everything is secondhand and works fine to my knowledge. Willing to take offers, but won't be dpropping much yet. Contact Details: Ph: 0413 934 330 PM or giddyup_24@hotmail.com Location: Glen Waverely, Vic. Delivery & Conditions of Delivery: Pick Up welcome, Post at buyers expense unless a reasonable deal in made Cheers chef

sorry man, just got sold. there are 2 sets in the for sale section though.

what does all that mean?? DFA??

i'm not sure its worth the effort. Rb26 rev up to about 9000 right. why not get one of those in and start working that, cost about the same as a proper build right. I went to the maserati club track day with a mate, at Sandown. Hes got a rb25/30 with a gt35 turbs. Fully forged, got the works cept for head work. Its a pretty impressive car. After the track day he was considering geting a gtr and starting again. same day the RPM GTR took 2 seconds off the fastes 360 modena out there, and that looked like it was setup for circuit.

gtt or gtr?? www.pbase.com/chef_32/