FSTR32

bump...any interest ppl?

The time has almost come for me to let go of my pride and joy that has completely consumed my life over the last 4 years. The decision has been extremely difficult as I absolutely love this car but after re-evaluating my life and the direction I want to go in there is no longer room for the car due to financial constraints and also I will be relocating next year. This car has had so much time and love put into it and has been built from the ground up by Unique Autosports in Western Sydney. No short cuts have been taken on this project and the car has been well looked after since day 1. Car is always garaged and never thrashed or raced. Over $45,000 (have all receipts) has been spent getting this car to where it is. No time wasters please. Ok where to start! I have owned this car for 2 years now, and it was a completely stock rolling shell when purchased with 110,000kms on the clock. Before the engine was dropped into the current shell, I had the engine built for my old 1991 Black GTST. I have put 30,000kms on the rebuilt motor. Car is now rarely driven and spends most of its days in the garage. The car has been engineered so new owner will have minimal problems with the authorities. Serviced every 5,000kms with Motul Chrono 300V Engine Oil. All other fluids are high temp Elf/Redline and have been changed regularly. Engine currently has a very mild tune and puts out 230rwkw at 15 psi (A LOT more potential with further work and more boost) Make: Nissan Model: Skyline R32 GTST Engine: Forged Built RB25DET Neo S1 (out of 1998 R34 GTT) Year: 1992 Km's: 128,000kms (rebuilt engine has 30,000kms) Location: Blue Mountains, West of Sydney Colour: Custom Velocity Blue (Has light pearl through paint) Rego: until May 2011 Transmission: 5 speed manual Price: $20k ONO Contact: PM or post in thread. Will give Mob number upon PM request. MOTOR/ENGINE BAY (Built by Andrew and Ben @ UAS) *ACL Racing Forged Pistons and Rings (20 thou) *Honed Rods *Fully Prepped block (all the usuals - NO shortcuts) *Bored and Honed Block *Fully Balanced *Metal gasket kit *Bronzed valve guides *Linished crank *N1 oil and water pumps *Head has been ported and polished *630cc Nismo Injectors *GTR fuel pump mounted in tank (fairly quiet) *Greddy Oil catch can *Custom manifold (heat wrapped for lower temps) *Turbosmart 45mm external wastegate *GT35/40r Turbo (Garrett) Custom built by GCG - 0.63 rear housing *Alloy radiator (40mm and brand new) *FMIC with alloy piping for more effective cooling *Splitfire Coilpacks *Turbosmart Supersonic BOV (sleeper series black and plumbed back) *DIA specialised air induction POD by BMC (enclosed) *Braided lines and fittings everywhere *Hyperformance Marine Battery WHEELS *Lenso GT5’s 19x9 (front) 19x9.5 (rear) with about 95% tread (235 fronts and rears) DRIVELINE/SUSPENSION/EXHAUST *Suspension kit is a full Whiteline works package with swaybars, Bilstein shocks, lowered springs, alignment bushes etc. *HICAS locking kit *Standard R33 RB25 gearbox (new gaskets/seals/bushes/bearings) *Full 3 inch mandrel bent turbo back exhaust system with Cat *Diff is Modified and LSD INTERIOR/ELECTRONICS *Brand new Turbosmart E-Boost 2 Electronic Boost controller (Set at 5psi, 10psi and 15psi) *Microtec MT8 Ecu *Boost, Oil Temp, Oil Press gauges (autometer cobalt series) *HKS Turbo Timer *Pioneer Bluetooth/MP3 head deck * Genuine Momo Italia Steering wheel * Custom Chrome Gear knob and leather handbrake/gearstick boots * Tinted windows EXTERIOR * GTR front bar with N1 Slots * GTR side skirts and rear pods * All guards have been rolled to accommodate the wider Offset of wheels I am sure there is more, but that is the major stuff and I will list anything more when I remember There is a range of spares and stock parts that will go with the car and the new owner is quite welcome to take it all away. Will get some more pics up this weekend, plus interior pics.

Bump. 250 Ono. Must go this week.

This iPod is still for sale. Any takers? $250

This IPOD is STILL FOR SALE! BE QUICK PPL. MUST GO ASAP. $250!!!!!!!!!!!!

FINAL PRICE DROP... $250 Come on People. This is fkn cheap!

price drop $280

BUMP...Must go by the weekend guys. Surely someone wants a touch haha.

Yes this is still available. Got a little bit of interest tho so be quick if you want it. 300 is about as low as I will go. If I cant get 300 for it I will just keep it I guess as I know its worth more than that. Depending on where you are located in Sydney I can throw in free home delivery. Cheers Luke PS. Inbox is now empty. PM's can be sent

PRICE DROP...$300 ONO. MUST GO THIS WEEK

As the title states. I have a brand new IPOD TOUCH 32GB edition still sealed in box. Unwanted gift. Retails for about $399. Will sell for $350 ONO. Need this gone asap. Postage is at buyers expense. Prefer pickup or I can drop off if around the western sydney area. Thanks guys PM me for more details

PM's replied. Will sell both for $550.

Please PM for more details. Prices are fairly neg but please be reasonable. Postage is at buyer expense and will be added to price goods. Air Induction Kit - Comes with Pod Filter $40 BSA 19x9 Chrome wheels x4 - Need new tyres plus 1 rim is buckled. All rims are scratched. Make an offer Genuine GTR Bar Mesh - $20 GTR Fuel Pump - $50 Kenwood 6x9's - $20 each Large Chrome Gauge Cup - $20 Small Chrome Gauge Cups x 2 - $15 each New Oil Filter Ryco Z442 - $5 Original GTST Horn Button - $10 Original GTST Horn Button 2 - $10 Pioneer MP3 Head Deck - $60 R32 Backseat - $50 R32 Dash Part - $20 R32 floor panels - $10 each R32 Side Mirrors - $20 each R32 standard Dash Cluster - $40 R32 Tail Lights - $30 each Standard R32 Rims x 4 - $40 per rim Standard R34 Neo Injectors x 6 - $100 Steering Wheel Bossing Kit - $50 Wheel Spacer Set - $20

PM's replied. A few people interested so far. First in first served.

As already stated I have 2 Ipod Touch's available (32GB) and they are the lastest model only recently released. Unwanted gifts and must go this week. Have not been opened or used. These currently retail for $399 each but will sell $300 each. Will send where ever at buyers expense. PM for more details or visit www.apple.com.au to find out more about tech specs etc. Thanks guys.

Problem solved. Bought some smaller battery connectors from autobarn, removed old connectors, stripped back wire and welded wire to new connectors. Probably should have done that first before I posted but I had a mental blank as to how to approach it. cheers for advice

looks shit house... I hate those square bomex front bars. GAY AS!

Hey this might seem like a stupid question but I wanna do it right so thats why im asking opinions. I just bought a new pulse battery...Its pretty decent and has brass terminals that screw up and down. Should I cut off my metal connectors on my positive and negative wires and wrap the wires under and around the brass terminals or should I just put the connectors straight over the brass terminals. Not sure about the 2nd option as my connectors are too big for the brass terminals. Any suggestions please?????? Thanks in advance

NEW PICS

COME ON PPL!!! THIS ITEM MUST BE GONE BY TOMMORROW.

Lots of PM's being recieved! come on guys. First in first served. THIS ITEM MUST GO!

Sorry guys...bit more info.. Tank is approx 15cm tall. And the hose is 15mm. All hoses and attacthments are 'EARLS' performance brand. cheers. Luke

Come on guys...this is an unbelievable price!!! Will not be beaten!

Item: TRUST/GREDDY OIL CATCH CAN WITH AIR SEPERATOR Age: 1 WEEK OLD Condition: PERFECT A1 CONDITION STILL IN BOX Price: WAS $189 SELL FOR $100 To Fit: WHATEVER AS ITS UNIVERSAL Location: PENRITH/BLUE MOUNTAINS AREA Contact: 0448037667 Comments: HI, I HAVE A GENUINE BRAND NEW TRUST (Greddy) OIL CATCH CAN WITH AIR SEPERATOR. I BOUGHT THIS LAST WEEK BUT I NOW NO LONGER REQUIRE IT. THIS ITEM HAS NEVER BEEN FITTED OR USED AND COMES WITH ALL ACCESSORIES IN BOX. WILL SUIT ANY SKYLINE/200SX/300ZX/180SX/SILVIA OR MOST PERFORMANCE CARS AS IT IS UNIVERSAL. I BOUGHT IT FROM HJC MOTORSPORTS FOR $189.00 (HAVE RECIEPT) BUT AM WILLING TO SELL FOR $100!!! MUST GO BY TUESDAY. QUICK SALE. PICK UP IS PREFERRED BUT CAN DELIVER AS A LAST RESORT. PM FOR ANY FURTHER QUESTIONS OR DETAILS. YOU WILL NOT FIND THIS ITEM BRAND NEW FOR CHEAPER! PRODUCT INFO - Oil Catch Tanks collect the oil, moisture and blow-by gases that cause carbon and sludge build-up in the intake system and engine to keep them clean even under the hardest driving conditions. The Traditional (Sq.) model holds 500ml and can be mounted vertically or horizontally and is only 9mm tall so it can be mounted just about anywhere.The Greddy oil catch can is also an excellent engine dress up item that gives a racecar look. Polished aluminum body with sight glass. CHEERS, LUKE.

Greg from Autosport Engineering, Kirrawee (in the shire) HIGHLY reccomended