Jump to content
SAU Community

GTR_Junkie

Members
  • Posts

    93
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by GTR_Junkie

  1. Wana swap it for an Audi RS6 engine????
  2. Scribble: There is a provision for a gate it just has to be welded on and it depends on the size of gate you have, it comes with the pipe and bend to weld on for the gate just need to be dumied up and then welded
  3. Benni: This is a 4WD gearbox it can be modified to RWD but im unsure of how
  4. Benni: Im unsure it is best if you arrange for the freight from your end weight will be around 150kg and size will be a pallet Cheers
  5. Im am after a set of guages in Defi BF Series Guages needed are Boost Oil Temp Oil Pressure Water Temp Control Unit [email protected] with pics and price
  6. well my engine builder knows what he's doing so if he says he can get it i will go with his word
  7. The reason i am wanting the CR of 9.0:1 is to allow me to make my target power with as low boost as possible. Cheers
  8. Guys, I have a brand new custom exhaust high mount manifold done by 6BOOST to suit RB26, anyone that knows his work will know this is a work of art. Im selling it becuase i have a upgraded to a T04Z with a split pulse rear housing, when i ordered the manifold i had a normal exhaust housing turbo. Now i have to sell this so i can order a new one Manifold will suit T4/T04 exhaust housing patterns Selling $1000 firm, brand new never used. Cheers, [email protected]
  9. Pistons i have are CP's, my engine builder said that he will give me as close to 9.0:1 as possible he will even machine down the block to achieve this CR Cheers,
  10. What fuel does he run for 10.0:1?
  11. Hi Guys, Im building my engine and i was wondering if anyone has built an RB26/30 engine using a CR of 9 or close to 9? My engine mods are: Top End -------- RB26 Head fully serviced and mildly ported HKS 272 Step 1 Cams HKS Cam Gears Bottom End (fresh rebuild) ----------- RB30 Bottom End Forged H-Beam Rods Forged Pistons O-Ringed Block ACL Race Series Bearings Oil Pump Drive Collar R33 GTR Oil Pump Oil Restrictors for the Head Fully Balanced Intake/Exhaust ------ Garrett T04Z 1.00 Rear 6Boost Manifold XTR 55mm Wastegate 600x300x100 Tube/Fin Intercooler ARC Air Box 3.5" Exhaust System Fuel System ----------- Bosch 044 Fuel Pump 700cc Injectors Nismo Fuel Reg (Adj) ECU ---- Apexi Power FC Q45 Air Flow Meter The reason i ask this question is if i can run a CR of as close to 9.0:1 as possible i hopefully can make my target power of 400kw at all four wheels with only using 16psi on pump fuel.This is going into an R32 GTR I appreciate that this is very dependant on how good the tuner is, i will be using a very reputable tuner who has good experience with tunning GTR's
  12. Dont forget Oliver Rods.
  13. Ive got a pair for $200, perfect condition
  14. Just one question. Where these power figures achived on pump fuel and if so which one?
  15. R32-GTS: What fuel, tyres did you use on your 10.9 pass and what revs did you launch from?
  16. Guys, About to remove this from my R32 GTR, it has done 90,000kms and up until now the car is stock. The reason I am selling it i am going to build a dog box and will be using a R33 GTR box due to the clutch that I have. Cheers [email protected] $900ono
  17. 500rwkw??? Interesting i wonder what it would take to produce that sort of power
  18. a stock box will do fine for 350-400kw at the wheesls? Ive been told the extra torque from the RB30 will lessen its chances of holding up. I am going to use the car for street and maybe one or two passes down the quarter until i get a good time. I have seen GTR boxes let go when the car wheel spins and then grabs traction due to the sudden load, that is my main concern i am also aware that they done like being smashed into gear Cheers
  19. Ok, well i was thinking to fir the engine up into a car, leaving the engine standard using Twin T04Z and the other assosciated bolt-on's, and once it grenades just removed and re-build it or buy another engine. Should be good for over 1000hp me thinks, the car will be used as a drag car but i want to keep it registered and engineered as i would like to be able to drive it on the street every now and then Cheers
  20. Thats what i thought, what about an old Nissan like a Z (not 300ZX) ?
×
×
  • Create New...