confuzion

turbodragon - that is perfection right there.. so clean

More recent pic of mine with tint and opened up front bar... need clear/smoked side indicators & better rims

Pretty sure I've sorted it by resealing the half-moons and just for good measure I put silicon around those welsh plugs as well haha.. will see how it goes but after a few drives there's no traces of oil anywhere yet!

Yeah just found another thread referencing that "you will have an oil leak at the back of your head that will be either engine out or drill a bighole in the firewall to fix" by Duncan.. damnit

Thanks mate that answers my question Will reseal and keep an eye on it.. Cheers

Actually I think it is coming from one of the half moons.. will re-seal and see how it goes. My question still remains though on if those other bits can leak thanks!

Hey all, I've had a persistent oil leak coming from the rear of my RB25DET. I've replaced both of the camshaft rubber half-moons and sealed with silicon and there is no oil coming from those grommets or the cam covers. If I run my hand lower down the head I can feel wet oil from this area (see pic) - my question is it even possible for this metal plug thing to leak? There is no mention of this thing in the service manuals - are they welded in? I suppose I can try silicon around them to see if that helps.. Any advice appreciated.. hoping its not a head off job.. :| Thanks all! Couldnt find a pic of the back of an RB25 so here is a front pic - same circle things

310rwhp @ hubs, 1.3bar Something not right with my setup, not making as much as it should.. I've since changed the restrictive Blitz Nur exhaust over with a straight through 3" system so hopefully could make a bit more.. yet to re-dyno Stock RB25DET HKS GT2540 HKS split dump pipe 3" front pipe 3" Catco high flow cat 3" Cat back Apexi Power FC Apexi pod filter JDM S15 480cc injectors Adjustable Fuel Press Reg. Walbro GSS-342 fuel pump FMIC

All look so hot and +1 on your wheels!

My god that looks amazing dude!

Hmm testing my memory.. in order from P plates: 1983 Mitsubishi Cordia - resprayed yellow, exhaust, lowered, rims etc 1986 Mitsubishi Cordia Turbo - 3" exhaust and boost 1985 Mitsubishi Cordia - DASH 12v engine, VR4 turbo, VR4 intercooler, 3" exhaust, Haltech E6K ECU 1979 Ford Cortina - 4Cyl model lol 1983 AE86 Toyota Sprinter - 4AGE 16v, Koni suspension, exhaust, 1983 AE86 Toyota Sprinter - Honda NSX yellow, AE101 GZE with bigport head and HKS GT2510 turbo, Haltech E6K ECU, RA60 brakes, TRD LSD, 3" exhaust & 250rwhp 1989 R32 GTR - HKS Cams, N1 turbos, 3" exhaust, China intercooler, Apexi PowerFC - 400rwhp 2002 Subaru WRX wagon - VF34, HKS Coilovers etc etc, 281awhp 2002 Subaru STi sedan - stock vf35, front mount, injectors, retune etc - 252awhp 1990 Mazda 626 2000 Honda Integra Type R - headers and Mugen exhaust, Mugen air intake - thing used to scream! 1996 Ford Falcon 1994 R33 Skyline - HKS GT2540 & usual mods

Thanks dude will do!

I hate mine to be honest.. Since this photo I've restored the headlights to crystal clear condition, but the S1 front is still ugly The Weds wheels are weak offset and poo looking, needs the duck wing, and clear side indicators.. sigh Still massive fun to drive though

Just beautiful!

I have pretty much the same problem sometimes.. turn car off, turn it back on and no power steering. Checked all connections and fuses and they seem all good. So I replaced the HICAS ECU in the boot 3 days ago and it hasn't done it since... but probably a bit too early to tell yet.

Hi, I have a 3" exhaust to suit R33 Skyline, came off my 2 door. It is one peice and consists of front pipe, cat, and catback with cannon muffler. I can cut it if it will make transport easier $100 firm, cheap as - I just want it gone. Located in Beechboro, Perth 0407 195 378

Located in WA. Have the exhaust off my R33 for sale as I've changed the setup. It's 3" from the front pipe, with cat and end cannon muffler Joins up to your existing dump pipe $300ono

Yeah agreed, I've had 2 x yellow cars (one of them had the NSX Yellow Pearl) and it's hell trying to get the paint to match as well

WRX box/clutches are really nice to drive (I've had 2) so if you have any concerns about the feel of it I would avoid it..

I personally used the Ding King on my STi when someone kicked the front 1/4 panel in and he got it out - could never tell it was there.. Actually I think there's still a pic of the dent on there - http://www.thedingking.com.au/images/custom/sub3.jpg Wasn't too expensive either, $150 or so from memory and highly recommended.. I will be using him for my r33 to get a rear 1/4 panel dent out soon

Just another to show my appreciation! Great write up.. seems as though my gasket wasn't sealing properly, so I did it again and used the gasket goop as mentioned and now all has been sweet the last couple days so I think it's safe to say it's sorted.. Cheers!

if any one has a spare one I'll take it! I couldnt get the arm off either, applied too much force and it shattered into a million peices.. tried superglueing the lot but it was just a fail so i binned it. Any help appreciated Cheers!

Yeah I hear ya.. the Greddy ones are the way to go imo.. good luck!

Me too, only one I can find is on modyourcar.com.au Is for 52 or 60mm gauges.. might be worth a look?

Sorry to revive this thread - just wanted to give my thanks as I had this exact problem and it's been annoying me for weeks! Went through all the usual bits, AFM, Coilpacks, AAC Valve, CAS, TPS, ECU and it ended up being this Fuel Pump Control Unit being unplugged! No idea how it came out, maybe when the jack was last taken out or somehting.. nevertheless I'm so freaken happy now !!