Xmetal

Spotted a few 33's last night in Newy CBD, was too pre-occupied driving to get plates.

I relented and put 95RON in with some Octane booster, Want Toluene? get friendly with a vehicle spray painter or paint shop owner.

I'd imagine Speed Hut would be able to do international mail outs - double check and make sure you can get a set made in Miles Per Hour too.

SAU'ers Remaining gallery pics are here: http://smg.photobucket.com/albums/v282/Xme...Drag%20day/SAU/

I saw it and wrote it off as 'another 32'.

Wasn't me! and my car never left the driveway! :lol: I must have an evil twin.

Speed cut made it go off the chart like that. That dyno reading was done with only a 2.5" catback and grounded solenoid mod.

I agree, FCD's and other little things like that are really only a band-aid solution. Going to be a long time before I can afford a PFC.

Yeah I did the 'ground the solenoid' mod, works well and tends to surprise people in traffic when the boost comes on. Makes for a perfectly flat boost line on the chart... AFR's are scary though

This is with a drain-pipe out the back, a pasta strainer on the intake and a bar fridge behind the front bar of course?

Bog stock white S2 spied between National Park and Steel Street today in town, Middle-aged fella driving it.

I think I saw that one parked in Darby St and it has a female owner.

Well, here's the tall and short of it. What's doin darl?

Inside the car would be alright... I've seen guys that buy Manfrotto suction cups for use on the insides of windscreens and they don't come undone. External use is most probably banned.

I might've seen it around, What colour is it?

Shitbox.

I'm interested in the aftermarket dump pipe, i'm assuming it's 3" with o2 sensor hole and works with the standard turbo? Could I get some pictures to info(at)xmetalphotography.com

Sammeh! (assuming you're using CS2) press F9 and bring up the 'Actions' box - you can create automated macro functions in there. They're easy to set up, if you get stuck add me to MSN and i'll walk you through it.

Welcome mate. Whereabouts in NSW are you?

take off from Bero BP?

I'm always up for a run out to Wollombi pub, awesome drive out there and the food at the pub is superb.

I don't see why it wouldn't fit because the pipes suggest that it would fit up really easily. I'd much rather try and get this kit to work rather than their other kit which involves drilling a hole in the chassis.

Took some pictures today of my suspension set up, this is for those who are wishing to go down the Tein road. The struts have the part numbers on the placards so I figured i'd throw these up as well. My Struts are Tein GT Wagon Driving Master Low Down Spec, Fitted to my Series 1 RS Four V. Front strut: Rear strut: WGNC34-R = rear WGNC34-F = front My car also has adjustable pillow-ball tension rods - from a BNR32 Skyline. Hopefully this helps a few people later down the track with suspension questions.

http://www.skylinesaustralia.com/forums/Bu...n-C-t92065.html Read Everything on this page and you'll be right as rain.