shaunmlawry

Front pipe SOLD Engine still here $900

No worries, tonights fine I just gotta go and grab it from my parents place. you can come and get it after 6.30 i'll pm you my address

Engine now $900

Yeah buddy, $120 is fine When do you want to pick it up? Shaun

Price Drop Engine $950 Front pipe $150

Hey guys Ive got a RB20DET silvertop up for sale I had it in my R31 87 silo, it ran a 13.5 at calder park. Engine comes with AFM, Wiring loom which has been chopped into and modified, ECU, R33 Turbo, all coil packs. Pretty much a complete engine. But doesn't come with a fly wheel At the moment the engine has a XF throttle body, but has no TPS. So it ran a little rough on take off. I am throwing in the Stock throttle body, but i don't have the TPS. Also the wiring for the TPS on the loom has been chopped and modified. I am also throwing in the stock r32 turbo. This would suit someone who knows a bit about cars and engines, and wants to put it in their R31. Or can be used to replace a blown engine. Engines only done 110 000 km I am also throwing in the piping that goes into the throttle body (as pictured) but it doesn't have the stock blow off valve, and has has a few holes drilled in it, where i had a pressure switch and extra injector. Engine is also leaking a little bit of oil from somewhere, i think a seal is leaking a little. not leaking much tho I'm not sure how much its worth, so i'm gonna start it at $1,100 (the R33 turbo its self is worth 300-400) Also for sale is a 3 inch mandrel bent front pipe/dump pipe (as pictured) A great upgrade from stock dump pipe $200 Engines located in Montmorency (Near Eltham) And the front pipe is in Greensborough Any questions don't hesitate to ask. I am happy to tell you everything about the engine Shaun [email protected]

Where abouts are you located? And how much you looking for it?

Good news, It was just a vacum leak One of the plugs that was plugging up a nipple ripped and came off So no blown turbo for me :-) Thanks for the help

Thanks Much appreciated Hopefully it is only a vacum leak I will find out tomorrow Thanks again

Thanks If my turbo were blown would it be generating any boost?

Hey guys I was trying to set my boost today, and as i was driving it went up to 20 pound for a split second My cars a rb20 silvertop with r33 turbo It is now making a loud wooshing noise like air is pushing out, it is still generating boost but stops around 6-7 psi, but i have the rb20 actuator so it should be around 11 or 12 Would my turbo be blown, or just a major vacum leak? I have checked all the intercooler pipes (but it is night, so i can't see everything), but nothing seems to be wrong any ideas? Also idle is very rough and jumps down to about 100 and back up constantly Thanks for any help

Hey guys, I am just after a SAFC II if anyone has one they want to sell. PM me if you do. Thanks

23710-73L10 I tried the cable with another computer and it still wouldn't pick up my ECU Thats probably the problem, my ECU doesn't support it Thanks for the help

Tried changing the TX and RX wires, still said can't find ECU. The cable is a USB one, no serial port. Thanks for the suggestions guys, this has me stumped TX has about 10v RX has .4v And CLK has around 2.4V Can someone with a USB cable maybe measure the voltage readings that they are getting on the cables in the USB plug just before they go into the computer, this should tell me if my cable is working properly. Tomorrow i am gonna get a mates computer and see if it works on it, it might just be my laptop Thanks again

all the drivers are installed, and windows picks up the cable fine. Its just all the programs that arn't picking up the ECU, only the free Conzult software says can't open port, the others try and find the ECU but can't Is there any manual way of testing the consult cable?