Jump to content
SAU Community

shaunmlawry

Members
  • Posts

    46
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by shaunmlawry

  1. Thanks That sounds what i am after
  2. Hey guys, I tried searching for a while but couldn't find much, just a whole lot of reading that wasn't answering my question. Can anyone tell me any afc that can be tuned via a laptop? And which one would be the best for a RB20 I find it easier tuning a laptop then the hand controler. Any help will be very appreciated Thanks
  3. Nah no aftermarket computer I don't have the rb20 tps any more, it got sent out in the rubbish thanks to my brother I have put power through the tps. The idle voltage is 1.85 V and the fully open voltage is around 10 V Is there anyway of changing it at all? Like something where you can set the starting resistance at .5 V and set the end at 4V and it controls the in between from this information? Thanks for any help
  4. Hey guys, I have changed my throttle body and i need to set up a tps for it. I have an rb20 engine and have changed my throttle body to an xf one I have noticed that the xf tps ranges from 500 ohms to 4600 omhs, but the rb20 tps ranges from 2000 ohms to 10 000 ohms. Is there any way that i can modify the out put of the xf tps to turn it into that range? Maybe using resistors or something? Thanks for any help
  5. Do you know how much psi the turbo can run? Thanks
  6. Thanks guys for all your help Has anyone used one of these on a RB20 silvetop? Thanks
  7. Sounds like its just what i am after Do you know of any shops that stock the unit? Thanks
  8. Thanks mate Have you used this before? Do you know where i can buy it? And do you know where it plugs in? Thanks
  9. Hey guys I was just wondering if anyone knew a cheap thing that i could hook up to my silvetop ecu so i can get all the data to show up onto my computer. I would like to measure my AFR against my RPM and just stuff like that. I was just wondering if there was something out there besides an aftermarket ecu Thanks
  10. Hey guys, I bought this turbo around 2 months ago with the intention to get my rb20 into the 12 second range But have since decided to leave my car as it is, because it is my daily and i have no need for that amount of power. Turbo has been fully rebuilt and has done 0 kms since rebuild Turbo's optimal range is from 16 psi to 24 psi Has T3 flange so it can bolt up to rb20/25 and possibly rb30. Comes with stock 3 inch dump pipe, braded oil line, and the water banjo bolts (sorry no water lines) Great turbo for RB20 because it has minimal lag, but can safely run high boost. Looking for around $1,200 [email protected] Thanks guys Sorry guys SOLD
  11. Hey guys Does anyone know if the T3G dump pipe fits up to a standard front pipe? Thanks
  12. Hey mate Interested in the turbo Is it still up for sale? Also do you know what is the maximum psi the turbo can run? I have an rb20 I an currently running a r33 trubo on 15 psi and i got a 13.7 1/4 mile I now need a bigger turbo to run around 18-20 psi Thanks
  13. Hey mate Just wondering how laggy this turbo is on an rb20? Also what psi can it run safely? I am looking for around a 18-20 psi turbo Also how much are you asking for it Thanks Shaun
  14. Hey guys, I was just wondering if anyone knew where i can buy a hobbs pressure switch in melbourne? Thanks
  15. Hey guys, I need the water lines plus the bolts for a r33 turbo series 2. Thanks
  16. Hey mate Very interested in the turbo, is it still available? I live close to southmorang so i can easily come and pick it up
  17. Yeh stupid me, fuel was on the wrong lines. Took it out for a test drive today and the thing over heated on me Anyone know how i can get the temperature gauge to work?
  18. All wired up now. Thanks anyway. But i am having difficulty starting it. I am getting fuel to the rail and injector pulse. I am also getting spark. But there is no fuel getting to the spark plugs Any idea?
  19. Hi guys Just after exactly what is needed to be wired up for my Rb20det to run in my 87 silo. I have tried to wire it up from another forums instructions but can't get it to kick over. There is no injector pulse. Any pictures of the wiring would also be greatly appreciated. It's just frusterating me, it's there but i can't drive it Thanks guys
  20. Hi guys, I have installed a Rb20det into my 87 silo. I have had a go at wiring it but i am getting no injector pulse. Can someone please tell me exactly how to wire up the fuel pump relay. And it is only the fuel pump relay and the ECU relay to wire up right? Any help will be greatly apprecated, pictures would be a very big help. Thanks guys
×
×
  • Create New...