tufrx3

Sorry we have not yet tried to machine a crank for anyone yet. It is possible but have not tried it.. I think that if you have the R33 crank you probably dont need the collar as i think that they fixed the overlap problem.

Sorry still here... Been busy working on my own project car, and been a little pre-occupied with work and the new wife..... Pics look great....

Thanks Relay was gone..

Sorry guys, Im no electical expert and would like a hand. Car is a R32 GTS4 I was driving to work and then suddenly the car just stopped. The car will turn over though but obviously there is no power going elsewhere.. no ignition light came up. Radio still works but no climate control power. I checked all the fuses and they seem to be ok.... I pluged in and out a few little things around the engine bay fuse box thinking it may be a loose.... after playing for a while it actually started.... I got to work, waited for the turbo timer to switch the car off and then tried to start it again.... (but NO luck) All the ignition lights are not working such as the ABS, 4wd and so on.. Can i please get some advise on what i need to do to get it back, or some advise what to check.. I think that it could be alarm related but i am not 100% sure... If this is not enough info at the moment please tell me what more to put... Thanks Karl

I hope this helps with the external drain.. This is a fitting that i made for the oil return... As for oil restrictor i am not 100% sure but people run a 1.5mm tomei one or a brass one like i have made.. Hope this helps

we did that 308 for someone.. with hand made pulleys and all.. I have also made RB Crank collars Oil gallery restrictor orifice (1.5mm) Will soon have a new oil pump done... with different profile to others for more flow and also a different drive mechanism to reduce the weak point thats in the current drive mechanism...

I have made up a few for a 20 and a 25...

Pm replied too.

The fit is tight. The pic you see is the first design. I made them now with a little lead in so that they are easier to fit or push in. These have only been put on a rb26 rocker cover so far, i am not sure if the rb20/25 is a little different in size? But that makes really no difference as i can make them to any size.. I know that AN fittings are expensive but they do look good and do the trick...

About 50.00 a pair. You need to bare in mind that the weld on ones are produced by the thousands and maybe in china too.

What do people think of these? I made up a few for a friend of mine, and it lets you put AN fittings for the breather and cleans up the engine bay a little. (i personally think its better than the current standard fitting) Also i know this is not a Skyline engine, though i thought that i will put it up. Just shows how people fabricate their engines....

Item:Oil Pump Snout/Collar Age:New, machined on CNC machine by me. Condition: Price:$100 each OR $80.00 each for orders of 3 or more. To Fit: (What car)RB Engines Location:SE Melbourne Contact:PM Comments: Snouts are machined from 4140 high tensile steel. However please note that the crank needs to be machined to fit this item as with other after market oil pump snouts. Will include fitting directions with product. If any doubt on quality you can visit my other item (RB Head Oil Drain Fitting) as per quality of products that i make. Will post pics soon.

Buyer fell through. Price drop to $1200 ONO plus postage

Looking at offers above $1300

Item:Apexi Power FC to suit RB20det (No hand controller) Age: Unused in box. (well i did plug it in once and started my car, but did not drive it as it is at default tune) Condition: Box has been opened as i was going to put on my R32 GTS4, but decided to keep the car stock for daily driving and kept the power fc in my cupboard waiting for a time to rebuild it, but decided to build my other car. Price: Open to Offers To Fit: (What car) R32...RB20det Location:SE Melbourne Contact: Email, or PM Comments: I have this listed on other forums. My warranty has expired on this unit so no warranty given. If the buyer is picking it up i could plug it into my car and show that it is fully operational. I do not have a hand controller though. It is missing the the double sided valco sitckers and the keyring that came with it. The computer has its basic default tune so it would need to be tuned by someone to suit your engine. Can either post via Australia Post where the buyer will pay for the item when he picks it up from Australia Post (buyer will pay for delivery costs but at least you know that you are getting the item when payment is made), OR, pick up OR buyer can suggest method

Item: 1. Power Fc to suit 93 - 96 model s14. Comes with Commander, and packaged as new. 2. Power Fc to suit 96 -98 Subaru Wrx. Comes with Commander. Location: Melbourne Item Condition: No. 1 --- Has not been tuned, and basically untouched since l brought it. No. 2 --- Missing outer box, but comes with other packaging such as certificates and all.. Reason for Selling: 1. I brought the first one for my brother which has a 200sx but his is a later model and as l brought it overseas l cannot return it. 2. I smashed my rexy just before l recieved this power fc from another ebay seller. Price and Payment Conditions: 1.... $780 ono for the s14 2. .... $720 ono for the rexy Payment COD. Extra Info: can send pics if needed but its self explanatory. Contact Details: PM me

I am not sure, but maybe someone here knows.. From what l know it suits a r32 gtst.

Bumpity bump..

no idea.. can anyone veryfy this further.. I have pluged it in my car, an it did run fine.. But did not take the car for a drive, as it says that it needs to be tuned before driving it.. so l did not want to take any risks..

Sorry it does not come with the hand controller.. i will be selling the car soon as l just brought a new focus, so there is no need for me to buy the commander. The commander that suits is a 415-n001 from memory... Plus my car is a gts4 and l was told that its not suitable. The power fc is new, comes with box and manuals(jap) and certificate. If anyone want a power fc commander 415-x001 l have a brand new one in box. Open to offers on this as l cannot use it. I am selling this power fc cheap.. open to offers..

Item: AP engineering Power FC Location: Melbourne Item Condition: New Condition.. Reason for Selling: GOt told it does not suit a r32 GTS4 (on this forum) and selling soon due to purchase of a new focus. Price and Payment Conditions: $950 Buyer pays for postage. Extra Info: Still in box with certificate and jap manual. Contact Details: message first.. Item: Power FC with hand controller to suit Subaru Impressa Location: Dandenong; Melbourne Item Condition: New Condition.. Reason for Selling: Rode of my old car.. did not get a chance to install it) Price and Payment Conditions: $850 Buyer pays for postage. Extra Info: Contact Details: message first.. Also have a spare hand controler 415-x001.. (brand new in box) open to offers.. Brought this hand controller of ebay and found that it does not suit the AP engineering rb20det power fc.

Thanks guys... Well looks like l will have to sell my power fc then.. Open to offers,....... Also if anyone is interested in a 415-X001 commander.. please make an offer.. ( i have two of these controllers.. one is for sale with the subaru power fc) My fault for buying a controller of ebay and getting the wrong one. Also a price drop on the power fc for the subaru.. looking at 850 with a controller to suit.

Hi, just wondering which commander is needed for the AP engineering power fc to suit a r32 rb20det.. i have a 415-x001 commander though it gets stuck on the apexi main screen.. I am not sure if this is the right one.. Does it make a difference if my car is a GTS4 and not a Gtst.. ????? Thankyou.. Also i am selling a power fc for a 96-00 subaru wrx.. ej20k or ej20j motor.. if anyone knows of anyone that wants one,. l only want 900 for it with the controller.