Trooper

Tube and fin. Braid does not fit on to radiator, used Samco silicon hoses for that. Used braid for some fuel lines, catch tank etc I think Dale [PSIParts] will end up using most of what I have left.

BUMP!!!

This is my favourite rear bar and skirts, what is it? Very neat and tidy - I dont like big grills and mesh and vent and curves. Looks similar to stock but a bit different, not sure if the skirt are stock or not, and I like the stealth wing. Anyone know where to get genuine body kits from? I would like to upgrade, but don't want a cheap kit that doesnt fit properly.

Yes its a Blitz return feed type FMIC running under the front bar then uses the stock intercooler pipes. It cost a bit, the braided line isn't that cheap and the thermo fans were a few hundred $$.. Was about $1000 for the silicon hose, braided line and finishers, 1m of silicon joiner and true clamps, two thermofans and switch. $210 for sandblasting and powdercoating. Plus labour (but we did brake pads, disc machine, service and a few other bits at the same time).

No its a polished stainless cover, still needs to be polished a bit more.

Any suggestions for improvements or coil cover colour?

BUMP!! SOLD - PENDING PICKUP/PAYMENT

FOR SALE High quality Stainless dump pipe for RB25det. Came off my R33. I bought this dump pipe off the forum about 6 months ago for $450 from batmbl i think it was, it was fitted to the car for about 500-1000kms (few weeks) then I got a new turbo fitted and this required a new pipe to be made. I had the 02 sensor hole welded in to the dump pipe. I am after $370 for the pipe ONO Pickup only In Sydney (or I can arrange transport to Canberra).

BUMP!!! I also have a front mount intercooler for sale with no piping - it HAS to go as i dont have any storage space for it. $70

Can you please PM me the name of this workshop? Thanks

I got "Action thread repairs" to come and get my broken studs out - there were 3 broken and 1 more broke getting it out. He charged less than $100 including all new studs --> AND he is also mobile so came to the workshop where i had my car stored. Just required that dump pipe and turbo was removed so he could get in there.

Sounds good mate There is lots of it there, i have had a lot of interest from people - there will be enough to go around.

I have a lot of silicon hose left over and some braided line as well (but no more fittings/finishers) if anyone needs some.

What about now? Coil cover still needs painting too. Can-Fab did the powedercoating (in Fyshwick ACT) - top price too, $130 to powdercoat the plenum, cross over pipe, two intercooler pipes, Rocker covers, Strut brace mounts, radiator mounts, and a few other little bits.

Need a small carbon canister The one that came with my car is a MONSTER, this thing is fricken HUGE. Long story short, I need a small one. I have seen some on a GTR and also a 33 GST-t which is about the size of a coke can, maybe even a bit smaller in diameter. The one one that I have is like a medium size paint tin... Prefer Sydney or Canberra for pickup. Cheers

Cleaned up the engine bay a bit and got some braided lines and new silicon hoses put in as well as a bit of powdercoating. Made a big difference to the engine bay. Still to come: mirror finish plenum and cross over pipe and fuse box cover, and re-polish the strut brace and a good degrease Will post the "before"shots later Julian [widebody32] did all of the work. Top bloke and did a really good job - anyone in the ACT I highly recommend Julian --> I travelled from Sydney to Canberra to get work done. Installed two thermo fans too. Comments appreciated. Any ideas for coil cover colour? I was thinking blue to match the oil cap.............

Not sure what they are worth at all, if you think the price is unreasonable I will negotiate. Located in Sydney, Eastern Suburbs I have the following for sale due to upgrades: -Standard Radiator Shroud - excellent condition, no cracks or broken clips $100 -Standard Radiator Fan - excellent condition - SOLD -Standard Boost Soleniod - excellent condition $100 -Standard Radiator Hoses - no cracks or damage $30 -Standard BOV $75 -Apexi (or apexi style) turbo timer $35 SOON TO ADD R33 RADIATOR - SERIES II (pressure tested, no leaks etc) to the list upgrading to a thick alloy radiator And a long length of silicon joiner, I think it is 63mm, but I will check. It fits onto the stock intercooler piping onto the cross over pipe. I have a length about 70cm long left over from a 1m length. Pickup only Can arrange for the bits to be taken to Canberra if required.

double post sorry

Can't she walk/bus/hitch-hike?

When your parents come to visit from out of town and hire a car When you spend an hour washing the car just to go to the supermarket when rain is forcast for the next week When it is more fun to wind people up at the lights that want to race you, laugh at them out loud, and then sit there for a few seconds when the lights go green and take off as slowly as you can And when the kitchen pantry no longer contains food, but the next stage of car parts because under the stairs is too full. Food goes on the bench or in the fridge OOPS said already- You have a several page exel spread sheet of "to do mods" with all the prices, part numbers, suppliers etc with totals down the bottom of each section - and it adds up to a lot more than the purchase price. and with your pay for the next 6 months already "spent" in the spreadsheet and it only gets 1/6 of the list done.

bump

Ahhh ok, thanks for that. I will just have to get the stock ones plastic welded, or buy some aftermarket ones. There is one big crack, almost full depth of the skirt and a few smaller cracks starting to form near high stress points like around the screw holes etc.

Thanks a lot guys. Definately looks better with skirts ON... however $$ is needed elsewhere for now, and no skirts looks better than cracked skirts. Cheers

Can someone please post a photo of their line with no side skirts (R33's)? Cheers

Tomei Exhaust cam gear PN 152010 $220 Brand new in box Dont wait weeks/months for delivery from Japan. Selling cam gear as I forgot to take it with me for the dyno tune, i do not want to pay to have the timing done again just to add a cam gear. Need the money now and I can do this further down the track when the engine comes out. Located in Sydney. Cheers