PEAKIN

Pretty sure that was my mates R34 they were using...his got stolen the same night. He's overseas and spewing, 2nd time it's been stolen and his pretty sure it's the same guys both times. Did you get much of a look at the car? Much damage?

SOLD

^ No wories mate

Thanks mate.

Yeh mate, PM me.

Price Drop $20,000 ONO

Still for sale

Only trade im after is a BMW E46 330ci, thanks.

1997 Nissan S14 200sx Series 2 Engine Mods Rebuilt SR20DET by CAPA Performance - Arias Forged Pistons and Rings (std bore) - Shot-Peened Rods - Clevevite Performance Bearings (mains/big ends) - Cometic 1.2mm Metal Steel Shimmed Head Gasket - Fully Harmonically Balanced - Acid Dipped - ARP Head Stud Kit - Rocker Arm Stoppers - Valve Guides Machined - Supertech Viton Valve Race Seals - Valves Faced and Seats Cut - Precision Hydraulic lifters - Genuine Garrett Gaskets Used Garrett GT2871R 52trim with .64 Exhaust Housing Tomei Poncams 256 in&exh 11.5mm Lift Brian Crower Valve Springs Nismo 555cc Injectors Z32 Airflow Meter Remapped ECU (Nistune board) by Jeff from The Speed Lab Walbro 255 lp/h Fuel Pump Braided Oil and Water Lines Front Mount Intercooler 600x300x100mm Polished Intercooler Piping Stainless steel intake pipe GKtech Stainless steel manifold Exhaust Manifold Heat Shield 3" Stainless Steel Exhaust with De-cat Pipe and Flex Pipe K&N Pod Filter Rocker Cover Breather Filter Turbotech Boost Controller Silicon Radiator/Heater Hoses Driveline & Brakes B&N Short Shifter Xtreme Xtra-Heavy Duty Solid Button Clutch - 1200kg Pressure Plate - ARP Bolts from Crank to Flywheel and Clutch to Flywheel New Clutch Cable Freshly Shimmed Stock Diff Bendix CTFront Brake Pads Bendix Advanced Rear Brake Pads Suspension G4 Racing Adjustable Coilovers Polyurathane Front Bushes New Tie Rod Ends Front Polished Strut Brace Wheels Starcorp Impuls 19 x 8.5 +18 (20mm spacer) 19 x 9.5 +23 (15mm spacer) Exterior Vertex Front Bar (also have Uras Type 4 Front Bar) Vertex Sideskirts and Rear Bar Ganador Side Mirrors (painted) JDM Clear Front Bar Indicators Clear Side Indicators JDM Bootlid (no holes/spoiler) JDM Bonnet Badge Mines Bonnet Decal Red Painted Brake Calipers White Headlight Extended wattage High and low beam globes Rolled guards all round Interior Black Leather Interior Momo Steering Wheel Momo Gear Knob Apexi EL Mechanical Boost Gauge Mounted on A-pillar APEXi Rev/Speed Meter Carbon Fibre Trims HKS Turbo Timer New Alarm System Genuine 200sx Floor Mats Stereo Kenwood Head unit Kenwood 6" Splits in Front Doors Kenwood 7x10's in Parcel Shelf Kenwood 4 channel amp Power 257.8 rwkw @ 22psi The new forged motor has only done 7000km's and most of the mods were done at the same time. The rims, ganador mirrors, new bootlid, nistune remap, cams, exhaust system, walbro fuel pump, front mount intercooler, rocker arm stoppers, braided oil and water lines, silicon heater hose kit, cometic metal head gasket, new precision hydraulic lifters, front bendix pads, Supertech Viton valve race seals , valve maching and head reco were done less than 1000km's ago. The engine was inspected while the head was off and everything was 100%. Car is mechanically A1 and I'm only selling due to losing my license and not being able to drive it. Never been on a track or been in an accident. I've owed it for the last 3 years. I've spent over $20,000 on the car to get it to where it is now, have reciepts for the work done and a excel spread sheet with all the mods and costs. Engine was built by Scott Hardwick from CAPA Performance. Car is located in Adelaide. $21,000 ONO Tim - 0433382466

Are the lobes on the cams flat? e.g no scores? Could you please get me some close up pics?

how many km's were the cams used for? willing to go any cheaper?...new set is $550 delivered.

Ah shit. Bad luck bud, least you had some insurance, better than nothing.

Brin long time no chat. Shit mate that's gotta suck, just seen a link to this on ns.com and recognised your car. I'll def keep an eye out for it. Hope you find it in one piece.

updated

SOLD

still avail

All details at the following link. http://www.nissansilvia.com/forums/index.p...howtopic=194439

Item: 2002 Yamaha YZ 125 Dirtbike Location: Riverland, South Australia 2.5 hours from Adelaide, 1.5 hour from Mildura Item Condition: Very good\Execellent condition. Reason for Selling: No use for it, never ride it Price and Payment Conditions: $3500 pickup Extra Info: Only 25 - 30 hours use! Hasn't been ridden in last year and half. Bought brand new in December 2002 for $9500. Has new rear tyre, new front tube, new grips. It got serviced after every 2nd ride (air filter cleaned, new spark plug, washed) only used on trails (rarely) and mainly around the property. Very good bike. Has twin air aftermarket air filter and a black fender on the rear. Comes with a spares kit (gaskets etc if you ever need to rebuild it). Never had any problems with it at all. If your keen or any other questions let me know. Pictures: http://i10.photobucket.com/albums/a146/PEAKIN/PICT0019.jpg http://i10.photobucket.com/albums/a146/PEAKIN/PICT0023.jpg http://i10.photobucket.com/albums/a146/PEAKIN/PICT0022.jpg http://i10.photobucket.com/albums/a146/PEAKIN/PICT0021.jpg http://i10.photobucket.com/albums/a146/PEAKIN/PICT0020.jpg Contact Details: Tim - 0407 523 496

send pics to [email protected] thanks.

f**k they are like my all time favourite wheels...19" aswell...damn, dont have the budget after the rebuild.

got pics?

4 x S14a coilpacks, perfect working order - Coil Packs will work on s13 sr20 but not s15. - $150 (wreckers charge $120 EACH) S14a crank angle sensor, also in perfect working order - I know the crank angle sensor will work on s15 not sure about s13 someone has told me that they do and it works fine but I can't guarantee it - $200 (wreckers charge $350) Microtech Microfueller. 5th injector that bolts into intercooler piping just before the throttle body. Comes with Mircrotech controller that controls how much fuel is injected into the boosted air stream. Cheap uprade without having to get full set of injectors and a aftermarket ecu or a remap. Only requires a tune once installed. Easy to install. My car made 215rwkw with this supplementing my fuel supply with stock injectors - $300 ono (pics coming soon) 17" Momo rims - $800 ono - http://www.nissansilvia.com/forums/index.p...=145331&hl= S14 heat shield - home made out of alloy, sprayed silver and finished with rubber edging. Has lips ontop to attatch lid to (you need to make one) your stock afm and rubber pipe will attatch to it as seen in the pic - $30 - heat shield pic Front bar standard orange indicators $30 ono - Indicators in front bar S14a blue rear bar, - few scratches $50 ono - Rear bar pic S14a stock gear knob $30 ono S14a stock shifter $30 ono S14 front mud guards/flaps - $20 ono Will post anywhere in Aust at buyers cost. No pickup available.

I need a s14 or s15 crank angle sensor asap. I know this is a skyline forum but someone may have this. thanks let me know.

Will you sell without tyres? how much without?

Also interested in the answers to the question above if you still have them!