skybt1

Yeah, its an R200. I was told that the longer of the two output shafts goes on the driver side. I cant see if its on the circlip but it certainly does feel like it clipped in well as its tight to get off. Its just that when i was fitting the passenger side one it was a bit tight and didnt go on as easy as the driver side. So that lead to me being not %100 sure if i did the right thing or not.. There is still movement within the shaft bit between the output and the companion flange. Its not tight.

Hi. I have just fitted a mechanical clutch lsd and wanted to clarify which drive/cv shaft goes where. One of them is longer then the other. Does the longer output shaft go on the driver side or passenger? Ive got it on the driver. Sounds right from memory but just want some clarification. Cheers

sorry mate, they're for an r30. You can cross check the part numbers on the pedders website. Maybe you can use them on a 31.

Someone come and lower their car. $150 the set or $100 a pair. They are pedders Sports ryder. Pick up from oakleigh, vic.

shit hot! looks tough as!!

I got a vl turbo pump that works last time it was in the car, and a r30 fuel pump that was only on my car for a couple years. You can have either one for $50. If you're interested ill test them out, make sure they still switch on and pump. They are both bosch.

i am with the understanding that 16x8's will fit under nicely with 245/45's i will be able to confirm this soon. Ghostrider has touched on this before in another post. he fits 245/45's on a 16x8

spot on!

I said they SHOULD fit not that they WILL fit. At the moment i have silvia rotors and calipars sitting under 15in silvia rims. What silvia rims are 17x7??

I think they may be slightly bigger and slightly thicker. Only using the 32 parts coz i got them cheap, so im not worried about overkill.

if you put s13 hubs on the fron with coilovers then throw on some big discs and calipars. Then any rims that fit silvias and 180sx's (over 15in) should fit. Im in the process of fitting 32GTR discs and calipars to the front. Havent had a look at the rears but i do have the rear 2pots to go on also. Not sure about rear mounting points and hand brake cable assembly yet..

mint. good luck!

yeah i know, that thought did cross my mind when i was asking the question. Bloody english language. Uses same words for totally different meanings..

8 results with 11 votes? Where are the other 3?

it doesnt sound like you should be attempting to change your uni joints on your own..

thats super neat! looks like its got tripple webbers!

I used to see a white 4door cruisin around. Think its a HR30. Turbo. Sounds like an FJ. But havent seen it in ages. Probably since i stopped cruisin around so much..

Just wondering how many of you are where. Always see the odd 30 out and about but never cruisin with other 30's. Wondering how scarce these are and how widely spread the obsession is.

part of the reason why i went with an rb30. I hated working on the Lmotor.

you can probably start with posting something in the non classic skylines section. They will have more knowledge of the car you have and mods involved.

So you are saying that you cut the control arms and reweld them together??

25K DR30 Love the engine. A lot of it is a bit poxy for me. Different colour bonnot Looks like a great circuit car!

thats fuc/ed. I dont know what id do if someone rammed into my car..

It certainly has all the goodies. Turbo is bloody huge. Not a fan of the colour. Looks a bit cheesy.

Last time i got someone to make them up, two of them broke straight away and this last set has lasted about 7 months but has broken also. I think i may have an idea to tie me over until i can source some PROPER R200 R30 drive shafts.