jtur32

any airflow meters if so how much

i need 2 airflow meters for a gtr r32 must be in good order or is there any aftermarket compatible ones

took the air flow meters of tonite and gave them a bit of a blow through and cleaned apexi air pods they seemed ok and seemed to pull harder and didnt stall {yet} i only picked the car up on sat and drove it about 400km no probs is there any after market afm u can buy

my gtr r32 kept stalling after a hard run and would not rev past 3000rpm when it got to 3000 it just went brap brap brap like a pp rotary and would stall when u let the throttle of but if i turn the key on and of 4/5 times it seemed to come rite any ideas anyone

not bad not bad atall i found out from a dealer its 11/89

cheers thats put a smile on my

sorry stevel the number was wrong its bnr32003239 sorry my mistake

how can u tell by the numbers and what is fast

what is the web site

bnr32004240

how do i find out if my gtr r32 is a 89 or 92 because there is no build date on the car. it is reg as an 89 but i am sus

has anyone started there gtr and with the same throttle position the revs go up and down after its had a good run{shouldnt let the misses try to drive it}

yes i did normal operating temp

thanks if it has slightly bigger cams do the readings so lower psi

i dont think anything is wrong i just bought it did a compression test no1-150psi no2-155 psi no3-155psi no4-155psi no5 155psi no6-155psi i put a couple of drips of oil in the cylinder no1 and it went up 5psi is that bad? it is meant to have slightly bigger cams in it oil pressure is about 2 at 1000rpm and goes up to 4 at about 3500rpm-4000rpm

what is the normal psi for a compression test on a rb 26 also what is the normal oil pressure

my number is 0417382107

must have compliance reg and prefer psi test and leak test and rwc email to [email protected] i am getting sick of looking i live in tas so anyone down here who knows of any would be helpfull also any comments on importing the good or bad

has it had a compression test or leakage test done i am interested but gunna cost a bit to gettit to tas