slyr32

Hey guys have a gizzmo dual stage shift light for sale has had very little use located in melbourne eastern suburbs price: $110 Contact joe 0421646735 will ship at buyers expense

whats been done to the motor or is it stock?

hey mate would you take 300 for projectors?

i can pick up this week

hey mate i brought the coilpacks off you do you have a AFM by any chance?

the car is running standard plumb back BOV for roady ill check the voltage too!

cheers mate i have changes plugs, coilpacks, checked timing with timing light but didnt check CAS! if timing is ok can CAS still be f**ked? i also tried another ECU was does the O2 sensor do? i didnt think that would affect it!

sorry just read it properly then would to take 600 for plenum and injectors?

what price are you looking at for plenum?

hey guys i am in need of help!!! my situation is, put an rb20det in to my r31 skyline, started it all ok, once everything was done and ready to drive still all ok and then about a month into it the car starts running really bad. Looked on the forums for the problems i was having and nothing seemed to work. when car is free reving it seems to miss at about 3000RPM and when under load and about to come on boost the car seams like it stops and picks up again. But some times the car runs as if nothings wrong but most of the time runs like crap. things i have done and checked: replaced plugs checked coils and replaced as they looked stuffed. the ones that i put in were from an rb20 but they were spring type and the ones that were on the car were a pin type. would they still work fine?? checked cas and timing all ok. was just wondering could a stuffed AFM cause this sort of a problem?? any help would be much appriciated.

hey mate do you have coilpacks in good condition by any chance?

would a wolf 3D V4 thats suited for RB25 plug straight into RB20 loom? and if yes would it still be easy to tune for a RB20?

will this suit RB20?

hey mate just wondering if you would consider posting at my cost to 3136? i could organise it

hey mate just wondering if you have these alluminium rocker covers for RB20 suited for speedflow fittings? and where abouts are you located? cheers

$300 posted to 3136?

I am putting a thermo fan in my 31 with a RB20! what temperature do i need the fan to turn on at? thannks

does this bolt straight on to RB20 engine

would you take 150 pickup for it cheers

Sorry mate in Melbourne

Bump

hey guys.. stripped my R31 skyline and have a full manual conversion comes with.. * gearbox with shifter * heavy duty clutch * stnd flywheel * tail shaft comes with brand new center bearing * ECU * slave cylinder * peddle box * shifter surrounding ( plastic interior bit ) * cross member $700ono eastern suburbs (croydon) contact Joe 0421646735

hey mate interested in the cooler if sstill for sale cheers

have you got a pic of the gauge

hey, will the cooler and piping fit my R31 RB20? with not much modification? im in melb as well cheers