AnDyStYLe

Bump!

Bump!

Ok so it’s been 2 weeks since the old girl has moved on and hopefully settled down ok with her new owner. Still a bit shattered that she’s gone, but that’s life and time to move on… So on that note, it’s also the time to move on some new and old parts that are now taking up space since I will no longer use them. This thread will get updated with more parts as I get a chance to go through them all, or if I have new pictures to post up, or if shit sells (will be removed)… So be sure to check back Now I ain’t holding shit for no one as I’ve been burned before. First to come up with the cash will get the goods. Too easy Also you’ll note in the following, prices are ono (or nearest offer). Doesn’t mean I’ll give them away for nothing. An item or two will be firm, and if it doesn’t state “or posted via Express Post” then I’m not all that keen to post due to the size or weight of the item. Be warned, low ballers will be ignore or cop a barrage of abuse. Simple Ok so for the goodies in no particular order (most are Silvia stuff and initially posted in ns.com, but hopefully may apply here too, there is one item which is Skyline related, that being the R33 GTS-t Handbrake Cables ) Genuine Volk Rays Eng TE37 (Matte Black) - Staggered - $3000ono pick up Check this thread for full details: http://www.sau.com.au/forums/topic/453801-genuine-volk-rays-eng-te37-matte-black-staggered/ ============================================================================================ Genuine Origin Carbon Fiber Door Visors (used, but as new – mint condition) - $200ono pick up This has been trimmed to fit an RS13/RPS13 (180sx). Origin didn’t make this for the RPS13, but only for the S13/PS13 (Silvia). As per picture, it has been trimmed and cuts off at the door. It still can be fitted to a Silvia, but it will also cut off at the door (won’t continue onto the quarter windows). ============================================================================================ Genuine Ikeya Formula Tie Rod Ends S13/S15 (BNIB) - $350ono pick up or posted via Express Post Pictures tell all. Brand new in box. Never been used. ============================================================================================ Genuine Apexi Power Intake 500-A022 (BNIB) & Apexi PS13/RPS13 SR20DET Adaptor (used, but as new) - $150ono pick up or posted via Express Post The 500-A022 will fit both Z32 AFM and PS13/RPS13 AFM with the adaptor. It has the bolt locations on the filter to suit either ones. I bought this in anticipation to fit up to a Z32 AFM when I was going to do a turbo upgrade, but never got around to doing it. Included in this sale is the PS13/RPS13 SR20DET metal adaptor. Refer to pictures, should tell all. ============================================================================================ Genuine Nissan R33 GTS-t Handbrake Cables (BNIB) - $150ono pick up or posted via Express Post Pictures tell all. Brand new in box (plastic). Never been used. ============================================================================================ Genuine Nissan RPS13 Type X Side Extensions L&R pair (BNIB, although I got them painted stock Type X white colour code 326) - $150 firm pick up or posted via Express Post Bought these brand new from the US a few years back. As most on ns.com know, I’m anal as it gets and got these to replace the ones I had on the car because one of them had a slight flaw on a section where it meets and double tapes onto the front guard so it didn’t sit 100% flush against the guard. Anyhoo, I got them sprayed stock Type X white (colour code 326), but never had the time to fit them up. Still has the original Nissan double sided tape untouched. Note that the pictures are unpainted. Pictures were obviously taken prior to getting them painted. Will get current painted pictures next time I get a chance. ============================================================================================ Genuine Nissan RPS13 Type X Front Bar to Side Extensions Brackets L&R pair (BNIB) - $70ono pick up or posted via Express Post Similar to the above, I bought these at the same time as the Side Extensions and wanted to fit up at the same time. Never got around to doing it. They are brand in new box (plastic). Note that the 2nd picture with the red background is not mine and just for reference, since my actual pictures are still in the plastic and hard to see. These are basically the brackets that bolt onto the Type X front bar to bolt up onto the front guards, to meet the Side Extensions. If you want these together with the Side Extensions, will let them go for $200 the lot. ============================================================================================ Genuine Tomei Dump Pipe with EAI (EGR) for PS13/RPS13 SR20DET (BNIB) & Genuine Nissan EGR Pipe (BNIB) - $350 firm pick up or posted via Express Post These are now discontinued! Bought this thing a few years back to fit up (again, never came around to do so) in the attempt to make my car Popo and EPA friendly. This Tomei Dump Pipe has the section to maintain the EGR, unlike the typical standard Tomei Dump Pipe without it and many of the copies floating about. I also bought the Nissan metal EGR pipe brand new as it’s almost impossible to remove and reuse the old one from the stock dump pipe as it is usually fused on after thousands of heat cycles. Will also include the stock EGR set up if you want the bits as well. Pictures should hopefully do the talking! ============================================================================================ HPINABOX T25>T28 Turbo Clocking Adaptors (BNIB) - $50 firm pick up or posted via Express Post I’m sure the interested buyer will know what this is and what it’s used for. All others, it’s to allow the inlet and outlet of the T28 turbo (GT2871R, Disco Potato etc.) comp cover to be clocked at an angle to be a direct bolt on for our beloved PS13/RPS13 SR20DET that utilise the T25 turbo. ============================================================================================ Midnight Mods PS13/RPS13 SR20DET Braided Turbo Lines (brand new) - $150ono pick up or posted via Express Post Brand new/unused. Didn’t state BNIB as it doesn’t come with box Picture tells all… ============================================================================================ Genuine Nissan T25>T28 Turbo Gasket/Bolts/Washers/Nuts/Screws/Drain Pipes etc. Kit (BNIB) - $TBA pick up or posted via Express Post (still need to properly add up all the prices to be able get a “kit” price, but food for thought I spent around $400 for the lot so will likely be around the $300-$350ono mark) Here we basically have ALL the ancillaries to do a turbo upgrade the proper way. EVERYTHING to fit up on a PS13/RPS13 SR20DET (and can also fit S14/S15 if you +- some parts). Again to show you how anal I am, I bought all new gaskets, bolts, washers, nuts, screws, drain pipes, the whole shebang to replace every single part when I set out to do my GT2871R turbo upgrade, which sadly never eventuated. I got all the parts with my own extensive research and cross referencing with Nissan FAST, so I know that each and every single item in this kit was going to fit onto my RPS13 SR20DET (180SX) from the block (exhaust manifold) to the dump pipe. I was prepared to replace all the old ancillaries for brand new. Do it right the first time right? Check the pictures to see all the bits and pieces included. Note that the exhaust manifold gasket is the more expensive 7-layer S15 one, rather than the cheaper PS13/RPS13 one. ============================================================================================ Various Genuine Stock Nissan Parts for PS13/RPS13 SR20DET (used): Here’s a list of stock parts for defect, RWC, and EPA/emissions purposes. I kept or bought all these parts over the time I had my car in case I ever got the dreaded defect (as everyone knows, Victoria is the granny state). These parts were my saving grace as I was able to use them to get 3x defects and 1x emissions test cleared without too much problems! Will get pictures up (hopefully) by the end of the week. Stock exhaust (great condition). Everything is intact, including the exhaust tips - $200ono pick up Stock suspension. Last used was about 2010 to clear a defect and was in good condition. Been sitting in the garage since - $100ono pick up Stock SMIC (good condition). Pretty sure it is all complete all the way to the throttle body (i.e. cold pipe). Hot pipe not included as that went with the car - $50ono pick up Stock EGR (good condition) - $50ono pick up ============================================================================================ So yeah, that's it for now. I'll post up more shit when I locate them so remember to check back regularly! Send me a PM for any interest, or shoot me a text on zero 421 one two one 8 one 8. Location is Burwood East, VIC for pick up. Cheers, Andy

Bump! Had a few people keen but no one's come up with the goods yet... Cheers, Andy Edit: Oh and an update on the rubber on the 17's... There is actually a bit of inner camber wear on the pair. Price still stands as I am basically giving the rubber away free with the wheels. Rubber on the 18's are basically brand new. Price is nego within reason. Low ballers will be ignored.

Hi All, Sadly sold the old girl earlier this week and have a number of parts left over which weren't included... My prized possession are the TE37's, so I'll start off with this. The rest will follow soon (watch this space). These are mint, basically brand new (as new). Not a flaw in them. Will let the pictures do the talking but will post more of them up this weekend. Current pictures are on the car, which obviously is no longer the case as the car is gone. Specs are as follows... 2x 17x9JJ+15 (Bridgestone Adrenalin RE001 215/45R17 at 80%) 2x 18x10.5J+22 (Bridgestone Adrenalin RE002 235/40R18 at 95%) 4x Rays Eng center caps 4x Rays Eng hub rings (73.1Øx66.1Ø - Suits Nissan hubs) Colour of the rims are genuine Rays Eng Matte Black. These were custom done by Rays Eng which incurred a hefty wait time, plus additional costs for the colour. Furthermore, I got these when Rays Eng updated the TE37's to show their branded (e.g. Rays Eng, Made in Japan, Forged Monoblock) on the rims to counter the wannabe/fake/inferior/copied rims mass produced. I have noticed that the finish on these are so much more durable than getting them resprayed in retrospect. I've experienced this first hand when I previously had an older discontinued pair of TE37's which were originally bronze, sprayed by a professional shop to matte black. The colour on the lips chipped very easily and looked ghetto as. The finish of the paint around the wheel nuts also came off even though it was professionally done. Whereas, the original Matte Black done by Rays Eng haven't got any chips or defects in the finish whatsoever! Anyhoo... Looking for $3k ono for the lot including the rubber. Not keen to separate the rims and the rubber as I'll have no use for the rubber. Pick up in Burwood East, VIC. Happy to courier but you need to organise it! Contact via sms preferred on zero four two one 1 2 1 eight 1 eight. Cheers, Andy

I've skimmed through the OP's post and this is what I got... - He paid for an item - Got scammed - Researched the said scammer to find all his history of scamming - Posts up thread calling out admins Wtf? Starting with point 3 would have cancelled out all other points, and OP wouldn't be in this situation. If I have it wrong, then I blame the TL;DR'properly. More gifs I say! Cheers, Andy

What are the center caps to suit? Cheers, Andy

SOLD, payment pending. Cheers, Andy

Also forgot to mention it comes with the standard acuator, which is the 7psi one if I remember correctly! Cheers, Andy

SOLD, payment pending! Cheers, Andy

SOLD, payment pending! Cheers, Andy

Sorry forgot to mention, location is Burwood East VIC. Cheers, Andy

Sorry forgot to mention, location is Burwood East VIC. Cheers, Andy

Sorry forgot to mention, location is Burwood East VIC. Cheers, Andy

Hi All, Brand new Z32 AFM incl Tomei plug. All brand new, refer to pictures! This was bought from JustJap Imports, so legitimacy of the AFM is not in question. I paid $330, so looking to get back at least $300. Will include Exp Post anywhere in Aus. Contact preferred via sms on zero four two one 1 2 1 eight one eight. Cheers, Andy

Hi All, Got a brand new GT2871R turbo for sale. Specs are as per title. The exh housing has been TC1 HPC TurboCoated by http://www.hpcoatings.com.au/. They have engraved their reference number on the housing for proof, but receipt can also be provided. Turbo was purchased from HPINABOX for $1400 and HPC was $300. Was looking at fitting all this up earlier in the year, but since have bought a new car and the 180 had been sitting in the garage collecting dust being neglected. Don't think I'll fit this stuff up in the very near future so money would be better at this stage. I'm after $1400 picked up, or can deliver at your expense (~$10-15 or thereabouts). Contact preferred via sms on zero four two one 1 2 1 eight one eight. Cheers, Andy

Hi All, Offloading 4x brand new Nismo 740cc injectors. You get exactly as per pictured. Chasing $600 firm delivered via Exp Post to anywhere in Aus. Contact preferred via sms on zero four two one 1 2 1 eight one eight. Cheers, Andy

What format does these pictures come on? Are raw images provided as well, or are they only watermarked ones after digital editing? Cheers, Andy

SOLD!!!

SOLD!!!

^ It's looking like it's sold at this stage, just waiting on confirmation regarding the courier that the buyer is organising. If that falls through, then I'll give you a shout. Cheers, Andy

^ lol sorry mate, it should have ended in "eight", not "right". Stupid auto correct! I've pm'd you back on ns.com Dale! Cheers, Andy

SOLD!!!

Bump! Price is ono, but please don't dish out silly offers as they'll be ignored. Had a couple of low ballers already Cheers, Andy

$700 take it away, need to clear space! Cheers, Andy