AnDyStYLe

Ok so it's time to let go of these rims... Served me well, although I now have my dream rims to go on the 180 They are Nissan R33 GTR rims (17x9+30) and I would think that they are one of the better ones going around. I have attached some pictures which should speak for themselves. Resolution I kept pretty decent sized so you can inspect for yourselves. The rear left has the worse of the gutter rashing, although very light and isn't deep that you'ld have trouble machining if you're anal. The rear right as you'll also see has extremely minimal. Both fronts are immaculate with no rashing (you may note that the front left has an imperfection on the lip closest towards the picture although it's just the lube they put wheel fitting the rubber rather than rashing) These will be fitted with rubber all round as follows: Front: 2x Federal 595SS 215/40R17 @ approx 90% (note: shown in above pictures) Rear: 2x Nankang Ultra Sport NS-II 235/40R17 @ approx 95% (note: NOT shown in pictures above, although refer to the below) Also they will/can include Japanese forged alloy bolt on spacers as follows: Front: 2x 20mm 5x114.3PCD Rear: 2x 25mm 5x114.3PCD All will come in the boxes and everything you would get when buying brand new. Here's the link for reference ---> http://japaneseimportspares.com.au/itemdetails/4072. I will get actual pictures up once the rims are off my ride! So now the price I'm after. A few options for the potential GENUINE buyer/s... 1. The whole shabang = $1400 pick up 2. Rims only = $1000 pick up 3. Rims and rubber = $1300 pick up 4. Rims and spacers = $1200 pick up 5. Rubber only = $350 pick up 6. Rubber and spacers = $500 pick up 7. Spacers only = $250 pick up or posted via Express Post anywhere in Aust Obviously I'ld love to let em go all in the one lot to save fkn around hence the cheaper price compared to selling individually. I'm pretty firm on the prices, although if you were to offer something genuinely appropriate I may consider. Any low ballers will be told where to go... Actually don't expect a response at all Location is Burwood East VIC for pick up. Willing to send by courier at your expense. Last set of rim I sent via Smartsend.com.au which was about $90 including insurance to NSW. I'm happy to get a quote if you kick over a postcode. Shoot me a pm for any interest! Apologies for the lengthy advert :lol: Also, just a reference picture of what the whole shabang likes like (although the rears in the picture are 215/45R17 so the actual rubber that will come with the sale will be more credit card gangsta fitment spec) lol Cheers, Andy

Thread locked in 3, 2, 1... Edit: Opps! Actually it appears that it's only one set, so I take it back

Hijack alert!!! Any got hook ups for well priced RE001's in Eastern suburbs? Particularily 235/45R17? I've previously bought RE001's through JaxQuickFit in Caulfield (Nathan the store manager is an awesome bloke) and he usually looks after me with fitting my rubber etc. Just be great to get price comparisons! Cheers, Andy

Hi All, No longer required Rays aluminimum air valve stems. No caps (they get stolen anyway lol) As per pictured... (2x anodized blue + 3x anodized black) Pretty sure they fit most rims. They came off a pair of SE37K and the other pair of TE37 rims, and will fit most of your Rays Volk Racing line. Jap spec up your ride boys I'm after $40ono Express Posted anywhere in Aust... Cheers, Andy

I'll take em, pm sent! Cheers, Andy

Looking at the pics and the amount of Bride seats I've gone through, they are fake in my opinion. Buyer beware... Cheers, Andy

This thread should be locked

I'll drop in Sat The 18 X 9.5" +12 Volk Te37 Bronze your selling in the other thread you mentioned was touched up (gutter marks removed and lips rebronzed) I'ld love to check out too! Cheers, Andy

^ Cheers for the reply! Rims are so fkn hot... Only the 19" part being too big for my application lol I've got 17x10JJ+18 in a pair of Bronze, but wanting to fix the gutter rashing and colour them up in the Rays Matte Black finish. Any chance you have contacts that can do exactly that? Wanting a finish as close to Rays as possible! Sorry I should have pm'd you... Cheers, Andy

Aaron does that Matte Black TE37 have a flat finish or is it textured like the Bronze finish Rays does? Cheers, Andy

Lol can't believe you actually took the time to do a VicRoads vehicle status check search x10 times on this tool :lol: Then again, I was curious and did the same hahaha... All came up with Toyota, except #####8 which was a Merc. #####4 came up as info unavaliable. Cheers, Andy

THIS!!! Or take life insurance on yourself... Sau.com can help you plan it! It's a win win for EVERYONE!!! /end thread Cheers, Andy Edit: Actually I call bs thread...

Congratulations mate! Now when are you going to be back at the workshop so I can book my car in for a tune lol Cheers, Andy

^ Don't give them a dollar anyway as that's a way of encouragement for them to continue to be a waste of my tax dollar lol Cheers, Andy

- Trent @ Status/Chequered Tuning for tuning - Rob @ Sabaddin Automotive for mechanical As mentioned above by others, Trent doesn't have the time to do mechanical work and is really a "tuning" workshop only. Trent did some mechanical work for me a couple of years back (A1 work and was extremely cheap, who would of thought A1 can also = cheap?). But yeah, if he still was able fit in mechanical work I would continue to take it there. I would also be happy to pay more. Work is faultless! I have also have a good run with Rob. All my mechanical work gets done there and trust him with my car. Had a few glitches with his newbie apprentice/s (because I'm one anal cnt) although Rob rectified the issues happily. That's my two cents Cheers, Andy

^ Thanks mate... Did you get your itch stratched in the end?

Bump!!! So... Anyone able to get their hands on Password:JDM parts? They are in the US and only ship within... I tried purchasing a part (Password:JDM AeroCatch Plus Flush Mounting Plates) and get it delivered to a mate in the US although their payment method and security is as tight as Fort Knox!!! The credit card name/biller address needs to match the delivery address and all that bullshit... Anyway, if anyone could assist in directing me to someone that can get these in that would be most appreciated! Alternatively, anyone able to custom fab the backing plates up (I can provide dimensions if required) I'ld be keen to purchase Cheers, Andy

^ Hey mate I'ld be pretty keen to get you to shoot my ride too... What's your fees and sh!t for your service? Cheers, Andy

215's sold... 235's still avaliable... $150 pick up!!!

SOLD!!!

^ Rails you'll need are either N045 or N046 for driver or passenger respectively to suit the R32... Basically you need to find R32 rails mate, not hard to find! Cheers, Andy

Had many pm's although most waste my time with non genuine offers or don't get back after agreeing with price Anyway, for genuine buyers I would be happy with $950 delivered! Cheers, Andy

*cough cough*

Charles89, Did you say you had this stuff for sale by the metre? I'm keen on a few metres if available! Cheers, Andy

Ok guys, I've decided to sell as follows: 2x Federal 595-SS 215/40R17 = $200 the pair 2x Federal 595-SS 235/45R17 $200 the pair or $350 the lot picked up! First in with the cash is the winner Cheers, Andy