hicas_posse
Members-
Posts
171 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by hicas_posse
-
hey guys, my car's selling out. The owner negotiated to have the car without any speakers but i thought i put in some cheapies to fill the hole. Anyway, I have some questions: REAR : ===== Currently running on 6.5inch 2 way splits. I found some 6 inch speakers. They don't come with that "split" box.. Question : I am running an amp for these speakers and I will leave him the amp. 1) can the amp still drive these speakers if they were not splits? I'm looking at the SOny 6 inch 2 way speakers at http://www.strathfield.com.au/images/Catal...0122/JPG/p5.JPG - as in , will it still have sound?? 2) do I have to disconnect the battery when i replace the speakers? I don't think so but just checking... thanks,guys!!
-
which state are u man?
-
hi guys I want to find out how much life is on my OEM brake pads. I'm wanting to put them back on the car cause the aftermarket ones which I bought are not compatible Called up Nissan spareparts but they don't have the info. What's the height of the stock OEM pads when new?? Also, where's a good place to buy brake pads? I went to the JDM IMPORTS website before and they ran out of Project MU so they sold me some other brand (which were dearer and said to be much better) which almost stuffed up my front rotors!
-
i got an r33 series. I run mine no WINMAX SPORTS-totally no complains (except brake dust but hey, u can't drive a dream and not pay the price). Very quite performance on and off street, great for mountain driving too.
-
that sounds pretty like it cause i had never had the discs (on the brakes) machined... but weird-how come it happens above 100km/h? So it's not a case of the wheel balancing gone ugly?? if it's the rotors that need machining, can anyone tell me if i need a balancing and alignment done again since the brake rotors are removed for machining (and then replaced in)? thanks!
-
hmmmm... how do you run the wire from the boot to the engine bay? i know how to bring it from the boot to the front seat(by taking the rear bak seat off but after that i'm as long as the guy is too.
-
guys need help here. I lost my keys and remote last night... So i took the spare keys and remote out and reprogrammed the immobiliser system so that the lost remote cannot control the car (even if somebody found it). Now, i found the fXXXing remote today . Currently, i am trying to get the immobiliser to recognise the lost remote again... In the manual, they say, "hold the emergency override button and after 10 secs, the siren will chirp 3 times". I did manage to get that effect this morning but now, i can't seem to do it and have been spending 1 and half hours in the god damned car !!!! Guys,it's a Code Alarm CA 130 and i m out of witts!!!! PlEASE HELP!!
-
guys i went to Dr Rubber in victoria st today. They guy recommended me Sumitomo for my R33 GTS-T for $180 per tyre (235/45/17). He says the perform very well.. any thoughts? i asked about Michelin Pilot Sport. He mentions that they are summer tyres. I had them in my car (front) for a year and have no problems ... Any one have any experience to share about Michelin PILOT SPORTS for all 4 seasons???
-
How To Install A Front Lip On S2 Front Bar
hicas_posse posted a topic in Exterior & Interior Styling
hey guys! need help. I tried to install the front lip back into my series 22 front lip (r33). 1. Do i have to remove the front bar to screw in the 2 middle screws of the front lip to the front bar?? 2. how do I remove the front bar( assuming i need to take it off)? I have searched the forums but can;t seem to find the post.. I am sure there's prolly a post for removing a s2 front bar (r33) but can;t find please help -if you guys have pics, that would rock! thanks! -
Removing front bar on S1 R33 GTSt
hicas_posse replied to Airzone's topic in Exterior & Interior Styling
guys, if you have diagrams, that would be great! -
American Needs Help With R34 Gtr
hicas_posse replied to Street Show's topic in Engines & Forced Induction
dude , start looking at some MOTEC ECUs since you have the $$$ then consider stroking the engine to a bigger displacement. Bigger turbo (run single maybe? -for bigger top end output) -
dude how abt Volt Stabilizer installs? does he do that?
-
geez!! that's good. I went to bob jane <won't name which one> and they f**ked up my alignment! and that was $65
-
Tyre Pressure Gauge
hicas_posse replied to ferni's topic in Suspension, braking, tyres and drivetrain
go to autobarn or WOOLIES (Perth) and get the Digital Michelin pressure reader. Man, I bought one and used it for over a year. I got no complaints!! Very accurate and my baby's 4 tyres get tuned to 36 psi every 2 weeks! No complaints and max of $50 only... -
sweet!! thanks for the places, guys!now, how abt a place to get the aircond serviced? the blower on the left is just so weak in the car!
-
guys, i noticed that when i have the blower on, the left vent in the centre doesn't blow at all whilst the right one is just alright. Noticed that i have to turn the fan speed to "2" only to feel some air being blown out by the blower. Is there any good place in melbourne that you can recommend for me to take the car to(hopefully they won't charge an arm and a leg)?? Prolly the aircond tubes need to be flushed or something.. i'm juz using the fan/blower and it's juz not strong enough.... sigh... thanks,fellas..