R33PWR

Have been having problems with the standard inlet pipe sucking closed(restricting flow),anyone know of somewhere to get either one made or if they sell aftermarket one of the same in solid pipe or anything. Only seems to happen above about 15psi.

Kumo Exctas 265s R17s at 248 rwkw slight loss of traction depends how you drive it an how hard your boost comes on, I can control it better with AVCR so yeah they are a good tyre IMO. I have a friend that was able to source cheap so I went on his advice. Sorry computer put in wrong post must of had both open...

where abouts are you located might be interested in locker

Has anyone used the plenum or seen the quality of the make. They are selling for 550 and look similar to the greddy manifold.

GTRS is the turbo a minimum of 12psi so wouldnt it be like running no boost control if the AVCR is turned off.

Thanks fo that just the soliniode, think I will have to get tuned again. Anyone got any thoughts on the oil lines crimping.

Have installed Both today as well as K&N pod (was a HKS mushroom filter before). Ces split dump the day before. Everything was fine although when driving have a ticking sound when coming on boost, had a look under bonnet and noticed when car is idling the hoses to the catch tank are crimped as if being sucked shut. Is the AVCR s soliniode making that ticking sound maybe. Power FC is reading knock levels quite early in the rev range at about 3500. Any ideas....

How about 700 pick-up , pm if interested. I am about to order from Japan at 700 so you could save me the wait.

I would go personally with apexi AVCR

167 across the board my mechanic said buy ,buy,buy. If you sell ,sell to me.

Oil lines included might be interested, so how did that damage come about?? What about the other side of the story how did the exhaust side fair??? Dont get me wrong am still interested to know the story...

Whats your best price for two. Not all.

I need to get 2 tyres and rims do they fit R33, cause I have to send a Volk mag to get rolled as it has inside damage to the lip and im sick of pumping up twice a day. You want to sell the back half if they fit.

Thoughts on ceramic coating and how much of an advantage it is over mild steel version with exhaust wrap. I have heard that the mild steel can become brittle after a while due to the temperature being contained.

Thanks people ,I was told that the dash had only twelve screws then out with the bulb. Cutting of the wire at the computer is that easier or fraught with danger if I cut the wrong wire.