mmjc

Bendar : Have you got the Serial number on the PFC? Can you please provide the number?

How much do you want for it Blitz boy? Does it require any trimming of any structural part? Are you in Vic?

Chef 32 . Still got the Apexi BOV? Does it come with the adapter kit to suit a R34 factory spot? Where are you situated in Melbourne?

Bendar: Can you please provide the serial number on the PFC? and Part Number as well... Thx...

Hey Bumblebee, Do you want to get them together from nengun? I'm in Melbourne and I was looking at getting the Blitz LM as most people in the forum says it's easier to install them. I have a R34 gtt. If we get them together, may be able to save some the freight? Let me know if you are interested. MMJC

Would you take anything less for the PFC? How old is it and do you still have the hand commander to sell it as a pack?

Where are you located Erwin? How long does the warranty have left to run? I will buy it if you drop the price a little bit more.

what is your website Satanic?

Hi guys, Sorry for any inconvenience. I just did a search under Blitz LM intercooler and this thread came up. I have a R34 GTT and really keen on getting the Blitz fmic kit. But all photos in here has been removed. Any chance of me getting these photos again? I wanted to know if I have to trim any of the reo or any structural part to fit the Blitz kit? If so, then it'll be the same as the JustJap stealth fmic then...?? Thanks guys. -Mike

Please help!! Anyone knows the answer to this? I am interested as well. A guy in the forum with nick name fishy stated that he had to trim the edge of the 'reo' bar. My question as below. Anyone can help? What do you mean when you say you have to trim the edge of the 'reo' bar? what is a 'reo' bar? I live in Victoria and at the area i live in the boys in blue will ping and ask for an engineer's cert if you any structural changes to the front end of the vehicle. Even a hole in a "structural" LHS apron! (All to do with ADR69 airbags - timing of airbags etc, a bit of a w#@k) But plastic bits on the bumper is no problems when i checked with an engineer. Can you kindly explain? Any pics of where you had to trim any metal reinforcement at the front end? Thanks Fishy. Great work. I have a GTT with factory nismo front bar and really keen to buy this kit.

Thanks bud. I will try those 2 companies as suggested. Does anyone know if I will haev to fabricate a new hat to fit the rotor or can I just buy brembo rotors with different offsets pre-hatted? Also, would 355mm definately fit inside my 18" wheels? I remember reading somewhere that GTT comes with 310mm original rotors at the front? Lastly, I've got a price of $600 for the Brembo rotors from ProTech Automotive in Preston. He couldn't remember the size of the rotor quoted though, so, I'll have to get back to you on this once he confirms it. Reasonably price?? Anyone knows?? Thanks heaps guys! Mike.

Anyone? Anyone that knows the answer? I was told that the biggest rotors i can put in there with the 18" Nismo LMGTs are 355mm rotors? Anyone that can help me with the above questions? Promise will post them on the forum once I get them done I still haven't bought the rotors yet. So, don't have a price as yet.

Hi everyone, I've got a brain teaser question here. Not sure if anyone has done this before, but i've got myself a brand new sets of front Ford BF XR6 Brembo calipers. Now this is the hard bit, I'm trying to fit these calipers on my R34 GTT. I have got no rotors yet thus, will have to buy new Brembo Rotors to go with them. As i've got 18" Nismo LM-GT4 rims on, I would like to get a bigger rotor than what the XR6 rotor is. I remember reading about someone commenting about the biggest size rotor that you can fit in a 18" wheels and also commenting that because the nismo LM-GT and/or Rays TE37 has got good brake clearance, supposedly you can fit a little bigger rotor than nomal wheels... i remember the person also commented on the actual figure/dimension. But i can't seem to find the thread on this topic!! I've looked upside down, inside out, offsets, wheels & offsets, brakes etc etc....After searching extensively, i've given up and therefore asking for all of yous to help (if you know the answer). Question 1: Has anyone fitted an XR6 Brembo setup onto a R34 GTT before? From what i can see, I would need to fabricate some sort of bracket to fit these calipers especially after i increase the rotor diameter. Caliper clearance should be no problem. Question 2: I'm using a 18" Nismo LM-GT4 rims thus, what is the largest diameter rotor/disc that i can fit in them? Question 3: I'm based in Melbourne. Do you know of anyone that can do a good job in Melbourne? Thanks guys. Great Forum! Cheers, Mike the happy R34 GTT owner.

Thanks for your response guys. Appreciate it. Yes. I am in Melbourne, can you kindly provide me (PM) your contact info? I would be delighted to come around to have a look at your car & setup. Buddy Club PII? what wheel is that? Any pictures i can get off any websites? I understand that the BLITZ R34 intercooler has a plumb-back system as well (seen the picture on AutoBahn n/Blitz website). I have also heard that the Apexi FMIC does that as well, but I have not seen the actual setup till date. These brands could be rather expensive though... Anyone heard of ROTA brand wheels? Do you know where I can get them? Cheers, Michael

First of all, please forgive my ignorance. I am new to this site and found it to be a great Forum and has great people! Can a 18x9.5 +30 wheel fit onto my R34 GTT seriesII? My car is stock with standard wheels and suspension. I am looking at changing my wheels to one of the BEE-R/Nismo LM types. (also similiar to the Drift Tek Wheels I've seen so far, but Drift Tek only comes in 17s at this stage is my understanding). Any photo's from anyone with these type of design wheels in a GTT? With this settings, will I have any clearance/rubbing problems? even with full turns? I am planing on fitting 235x40xR18 rubber in the front and 265x35xR18 rubber at the rears. I also plan to fit some coil over suspension when I upgrade the wheels. Lastly, has anyone heard about Rota wheels and where to get them in (Victoria) or Australia? On a separate note, I have a set of Brembo calipers but not sure if I can use them. They are brand new Brembo Calipers made for BF Ford Falcon premium brakes setup thus, I was told that i have to fabricate some sort of bracket to suit Nissan. I am however, not sure of disc thickness requirements for this calliper as well. I have checked out DBA specs and found that Nissan and Ford has minimal difference in thickness for replacement rotor/disc. Any brake experts in here? As for fmic, anyone know of brand(s) of front mount intercooler kits that utilises the factory plumbing? Reason is i don't want to cut any holes, or cut any body works to fit the fmic. Thank you all in advance! Keep it coming! Cheers,Michael

First of all, please forgive my ignorance. I am new to this site and found it to be a great Forum and has great people! This is a great thread and i've just gone through to read all the pages. Lots of info in there. However, not many people have posted offsets on a R34 GTT. I've got a question as per the person posted before me. Can a 18x9.5 +30 wheel fit onto my R34 GTT seriesII? My car is stock with standard wheels and suspension. I am looking at changing my wheels to one of the BEE-R/Nismo LM types. With this settings, will I have any clearance/rubbing problems? even with full turns? Lastly, has anyone heard about Rota wheels and where to get them in Australia? Thank you all in advance! Keep it coming! Cheers,Michael

Hi guys, My nams is Michael and I'm rather new to the site. I own a 2001, R34 Skyline GTT S2 with the same factory fitted Nismo front bumper as user: ECL's car (or the photo being shown in ECL's signature). I really like the aftermarket addition of the lower lip at the bottom of the front bumper. Does anyone know where to get them or where i can source them from? the brand of it, etc? Thanks for your help in advance!! I've fallen in love with that piece of bumper lip and i can't sleep until i get them!! cheers, Mic

Hi everyone, I am fairly new in thie forum. Thus, forgive my ignorance if this question has been posted before. As most of you are aware, the Nissan GTT Factory XENON headlights has been converted into halogen for compliance. I recently purchased a year 2000 GTT and mine's no difference. The complaince workshop has soldered 2 wires by splicing into the 12Volt line + Ground line to power the halogen H1 12V 55W globe. They have cut the line which powers the Xenon module (12V power line) and also cut the high voltage wires that connects to the Xenon globes from the module!! Anyone knows how/where I can repair this item to fit a factory Xenon Globes in again? I'm sure all of us with R34 GTTs and GTRs would love to have the factory XENON back on again. HELP? ANYONE??

Will these offset fit a ER34 GTT Skyline? I know the originals are 17x7.5? but not sure of the offset. Anyone know the correct offset for R34 GTT? I really like this wheel TE37 but unsure if they will fit. Does the TE37 somes in different offset?

Hi Just Jap. SAME QUESTION AS ABOVE. i just wanted to know if the pipping for the r34 gtt is avliable, also wanted to know if the pipping follows the same way as the stock cooler?? ( I have come across a Blitz type cooler kit that does this) or will it run on two different ends just like the sr20's

I know I'm a bit late to have seen this ad here. But is the PFC still on sale? or is it sold? I would be interested otherwise.