nugget400hp

I have changed plans to a ca18det so I dont need the firewall but will still be needing a trans tunnel to fit the jatco, could you give me a quote?

cool do u think you could give me a rough idea of what this would set me back?

like this

G'day, I have a ke20 corolla which I want to put an rb30et, gt35, 3spd jatco etc into. Wondering how much a recessed firewall (not the whole thing, just around the engine) and custom trans tunnel to suit would set me back to be fabricated. I will be able to do the cutting out etc, just need the sheetmetal work done. anyone who could help, that would be muchly appreciated

Also how much for a 4 point cage to suit ke20 with removable intrusion bars? cheers

can you do a custom trans tunnel into a ke20 corolla? Putting a ca18det into it. Ifso how much?

can you measure the comp wheel of the turbo? Also what size are the housings

$400?

will also accept rb20det or rb26dett bovs

do you have a factory bov?

gday, I'm after a stock bov (bypass valve) from an r33 turbo. Must be in working order. Let me know what you have. Cheers Brad 0403286407

make an offer

Have a 1.00 rear housing off garrett t66, only selling because I swapped it for a .84, it's in great condition.. $100 + post. Brad 0403286407

I have an unused garrett .63 rear off a GT35r, it has never been fitted to a car as we changed it to a .82 on my mates FJ20, it has been sitting in the shed for 2 yrs and has small bits of surface rust in a couple of spots but it's that minor you'd get it off with steel wool. After $150 + post. Brad 0403286407

bump

I baught this last year for $250, it's a brand new alloy 80mm throttle body, never even fitted. Selling because I got a new one. After $150 Brad 0403286407

I baught these about 18months ago when I was doing the 26/30 but have since changed back to an RB30 so these are of no use to me. I'm after $120+ post. 0403286407 Cheers Brad

bump

Havn't had a power run, it's on the run in tune, very rich down low and around 10-11psi boost. Feels like an easy 160-170rwkw at the moment though. I dont think 200rwkw will be a problem on moderate boost.

Here I have for sale my 1985 DR30 Ti skyline hatchback. It is a very regretful sale but it has to go. My mrs was accepted into design school on the Gold Coast so unfortunately I have to sell the car and get something more practical to move to the Goldy with. THE CAR IS COMPLETELY ENGINEERED FROM FRONT TO BACK. Mods are as follows. RB20DET engine stroked with RB26DETT crank to bring it out to a 2.4L, forged pistons, the engine is brand new and I'm still running it in, sounds very tough! It has a highflowed T28 turbo built by GCG in sydney, forward facing plenum, big throttle body, custom front mount intercooler, turbosmart BOV, 3" from turbo back, 3core radiator with twin thermos, big MSD injectors, BOSCH individual coils and a MoTeC M4 ECU. Driveline consists of an RB20det 5spd and a single plate button clutch which is very firm indeed, the box was rebuilt before it went in 200klms, the clutch was also replaced 3000ks ago. When the 5spd went in I also had a super tough single piece tail shaft built for it which cost me $450 alone. The diff is a rebuilt R200 IRS LSD with 3.9s in it and it also has 3,000ks on it. Brakes are R32 GTST brakes all round and it pulls up awesome! Koni adjustables suspension. It's rolling on 17" LENSO concept 5s and near new rubber all round. Being a Ti model it has power windows 'which all work perfectly' and nice comfy seats (no carpet but the floor is all painted mat black and looks good). There are a whole heap of gauges inside and a sony stereo with sub and amp. It goes Very well and is an awesome sleeper, nobody suspects the thing, I have driven past police and gone through RBT on numerous occasions in my area where they are pretty bad for defects and I havn't been pulled over once, they don't even look twice. Perfect car for a drift/circuit project or just a toy for the street! The car runs perfect and has been very reliable for me, I have used it as my daily driver for the last 3-4 months! Any more questions please don't hesitate to call Brad on 0403286407

I'm urgently after a center console in good condition to suit my '85 Ti skyline, it's manual and has power windows. Give me a call if you have something.. Cheers Brad 0403286407

BUMP>>>>>> The car now has a brand new REBUILT 5spd.... and brand new CUSTOM BUILT SINGLE PIECE TAIL SHAFT that cost me $450 alone.

g'day, just a quick question.... I know the mf5 and the rb20det 5spd are very similar, just wondering if an mf5 will bolt straight up to the rb20, using the same clutch and all... cheers brad

Cheers mate, I'll get a few more up on monday. Brad

------------------------------------------------------ G'day I'm selling my skyline that I got not long ago to fund a house. I baught it off a guy in sydney who had owned it for 8 years and spent alot of money on it! It's a 1985 Ti DR30 4door hatchback, fully engineered from front to back! Mods are as follows. RB20DET engine stroked with RB26DETT crank to bring it out to a 2.4L, forged pistons, the engine is brand new and I'm still running it in, sounds very tough! It has a highflowed T28 turbo built by GCG in sydney, forward facing plenum, big throttle body, custom front mount intercooler, turbosmart BOV, 3" from turbo back, 3core radiator with twin thermos, big MSD injectors, BOSCH individual coils and a MoTeC M4 ECU. Driveline consists of an RB25det 5spd and a single plate button clutch which is very firm indeed, the box was rebuilt before it went in 3,000ks ago and that's also when the clutch was done. The diff is a rebuilt R200 IRS LSD with 3.9s in it and it also has 3,000ks on it. Brakes are R32 GTST brakes all round and it pulls up awesome! Koni adjustables suspension. It's rolling on 17" LENSO concept 5s and near new rubber all round. Being a Ti model it has power windows 'which all work perfectly' and nice comfy seats (no carpet but the floor is all painted mat black and looks good). There are a whole heap of gauges inside and a sony stereo with sub and amp. It goes Very well and is an awesome sleeper, nobody suspects the thing, I have driven past cops on numerous occasions in my area where they are pretty bad for defects and I havn't been pulled over once, they don't even look twice. Perfect car for a drift/circuit project or just a toy for the street! The guy I got it off had 9k on it and a fair bit of interest in it, since ive got it I have tidied it up ALOT, including pulling a whole heap of unwanted wires out of the engine bay, a new alternator, a new cam seal as it was slightly leaking, sprayed the engine covers in VHT wrinkle black, cooler pipes have been painted, interior tidied up etc etc.. So I think the asking price of $7500ono is very reasonable! Anybody who's interested should call me on 0403286407. Cheers Brad ------------------------------------------------------