Jump to content
SAU Community

RIOT1

Members
  • Posts

    26
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by RIOT1

  1. lol chill. Situation: I dont know what they're worth The figure i put is what i would most likely pay for them myself. I dont have a price to compare If my figure is way off, i guess what im saying is i wont take less then the respected values for the moment, but i will consider your offer if i get desperate. Or, if my figure is low you guys can auction it up. cool ?
  2. Item: 2x 15mm Aluminium Spacers and 2x 23mm Spacers Location: South east Brisbane Item Condition: Good condition, few blemeshes ect.. as expected for used item. Reason for Selling: Dont have a car to put them on. Project Dorii-fc is down the drain. Price and Payment Conditions: Not sure as i havnt found any spacers for sale to get a ballpark from. Got them with a deal i did for a half cut. But im setting a reserve of $100 for the 15mm and $120 for the 23mm. Wont take less. Extra Info: The 23mm has 2 additional plates, which can be removed to make them 15mm also. Note the Yellow anodized ones are 23mm and the silver 15mm They are standard 5 stud 114.3? pcd. Fit all skylines and S5/6 RX7's Contact Details: PM or call me 0414829966 Cheers R1
  3. Hey guys, i have for sale a near new Autometer Phantom series 52mm Air/Fuel Ratio guage. Features white face, easy to install ( 3 wires, 1 ear, 1 12v, 1 tapped into oxy sensor) Purchased this for around $140 6 months ago had little use, has minor scratching on outer rim (not on face) other then this immaculate. looking for $70 buyer pays post or pickup from east bris feel free to contact me on 0414829966 cheers r1 Autometer site: http://www.autometer.com/cat_gaugedetail.aspx?gid=2606 actual pic:
  4. Hey mate yeh that should be cool i got onto a 180sx hiflow cat (bit of an old one) the flange inlet sizes are 2.5" if GTR is bigger then that, could i still grab one off either of you? Ill pay for postage Otherwise i guess it doesnt matter if i stick with this 2.5" unit. even 2.75" would be a help i guess Cheers Martin
  5. Yup, look like this in great condition tho. My location is Thorneside, Brisbane. (east side) Cheers
  6. Hey guys I can arrange shipping to adelaid, i have sent a set of wheels via aus post twice before, both times to melbourne costing around $25 a wheel to send. so i would think adelaid may be $30 a wheel tops. can check tho. And yes i still have them but im not budging on the price, i will loose money on the rubbers, dont need to on the mags aswell Yes just stocko's So first one to offer me the $$ gets them.. you can call me on 0414829966 Cheers
  7. hey mate will you take $300 pickup for the boost controller? where in qld are you cheers martin
  8. Awesome thanks heaps mate. ill send some $$ for postage let me know cheers
  9. Hey I have 4x R32 GTST Mags for sale with Brand new Metric rubbers 225/50/R16 all the way around. Done maybe 500km on them then bought new set of mags. Wheels are in immaculate condition the rubbers cost me over $150 each all i want for the full set inc. rubbers is $500 pickup from brisbane Cheers Martin
  10. ill offer $80 inc post to bris? lol i want a dead cat not a new one
  11. Hey guys im chasing a Hiflow cat. or doesnt need to be hiflow so long as it has ATLEAST 2.75" inlet and outlet. 3" preferable. can be dead as i intend on punching it out anyway Will consider anything sub $100 prefer to pickup from bris but can pay shipping Cheers R1
  12. yeh i think thats a no go-er... replaced the entire ECU and still same problem. spoke to the old man nad he said there should be an Injector temperature sensor. Which is either ****ed or activating too early shutting fuel off.. which makes sense coz thats the exact feeling i get... lack of fuel and no combustion its next on the list. after that i think ill cut the car in half and import another ;0
  13. Hi, just wondering if an ECU from R32 Turbo Auto Skyline is same as from 5sp.. need to replace one from a manual but cant get a hold of one. have an Auto ECU sitting in my hands, will it **** anything? Cheers r1
  14. Yes replaced this and all the leads going to and from it.. dry solder joints is a good suggestion. could explain somewhat why it ****s up after running for a while.. when it heats up could oxydize some more.. or something? :|
  15. Before anyone says anything.. i have searched and found nothing identicle. Car: 1989 R32 GTST Problem: After an hour or so of driving, engine will tend to CUT OUT briefly for a split second. It doesnt even attempt to fire. Can be driving in gear and nothing.. just dies. Ignition remains on and you can stab the throttle on and off and wont do shit till it decides to start firing and go back to normal engine cycle. Happens at almost any rev range in any gear with any boost pressure. Tried solving it by.... : - Checked fuel pump - OK - replaced fuel filter - replaced air filter - replaced air flow sensor - replaced spark plugs - replaced coil packs - replaced crank angle sensor. - Checked lines for vaccume leaks (checked BOV too, slightest leak when vented to atmo) The only things left i can think of is injection and ECU.. but the question is WHY only after an hour or so of driving.. it runs like a dream for the first part.. doesnt miss a beat. I'm lost Any suggestions would be great cheers
  16. If the gauge is 60mm or less and you will include shipping to brisbane i will take it pm me if we have a deal.
  17. Hey guys i have 2x Tail lights of an R32 GTST Rear-cut. In good condition, gunmetal paint. Not sure what im after, make me an offer i cant refuse CHeers R1 ps: feel free to pm or email me.!
×
×
  • Create New...