atmo31

SOLD

Another price drop.. $360 - free delivery.

North side of Brisbane

Price drop - Neo $370 delivered

SITC is sold pending payment. I'll let the Neo go for $380 delivered!!

For sale is my Apexi Neo and SITC. Neo is new and never used. I've only opened the box to check it out. SITC is in near perfect condition, once again I haven't used this but I bought it off someone on these forums who had it up and running fine. SITC was specifically made by Apexi to accompany SAFC / Neo's to look after timing. Further info on SITC: http://www.ca.dsm.org/tech-sitc.html. New Neo's are around the $400 mark and the SITC is crazy rare so I don't know how much they go for. I'm asking $500 delivered for both. Pick up is also ok. Feel free to shoot me any offers and also if you want to buy separately.

Thanks This car is now sold - awaiting payment...

In my experience repco/autobarn one's tend to rip up the front seal after a year, go nissan...

Bump

Hi Guys Some of you may have remembered this car was for sale around 8 months ago, I bought it needing some work because a battery had exploded in the engine bay! Not pretty. Since then you will be happy to know that I have stripped down all the pulleys, replaced the bearings, taken off all the covers and re-painted the whole lot. I’ve even re-painted under the bonnet. Since then I have also changed the coil packs, put in a header tank and put in a much larger thermo fan. I can confidently say that this is one VG30DET that will have NO overheating problems! Ever since I put in the header tank and thermo I’ve never been able to get it above 88 degrees, even in the middle of summer. Why am I selling the car? We’ve decided that it’s time to buy a house and I need $ for the deposit. I’ve already got another modified (non turbo) R31 which will get me around in the meantime – so I’ll have to try and live with that for a while. Owning two cars is too much of an ask when trying to save. Before I start with the details of the car – I have ALL the receipts for the modifications that have been done with the engine conversion. There has been well over $15k spent in modifications to this car. Performance Modifications The only dyno run done on this car by the previous owner was at 9.5psi (standard wastegate setting) – 177.3kw@TW It is now tuned to 14psi and would have well over 200kw@TW · New bosch battery! · VG30DET Engine Conversion (STANDARD flywheel figure as quoted by Nissan Japan = 190kw @6000rpm & 343NM @ 3200rpm). I have the receipts for the complete conversion - $11,000. · Custom heavy-duty engine mounts to suit · VG30DETT 5 speed – Z32 300zx, VERY strong gearbox, similar to R33 RB25DET gearbox internally · Exedy single plate brass button clutch · Custom balanced 2-piece tailshaft for high RPM/High speed durability · EMS-Q1-4 after market computer with version 7 upgrade including lambda control, data logging, laptop programming, comes with all software and instructions ($1700) (Currently tuned to run 14PSI). · APC (Advanced Performance Centre) intercooler – rated at 600hp ($800) · ALL aluminum inlet and intercooler pipework – heaps lighter than stainless steel · BMC pod filter – very high flow rates · Injectors were cleaned and flow checked within the last 2 years · Malpassi fuel pressure regulator ($190) · Custom Header Tank And Radiator Lines + Fittings (installed above the height of the head to insure coolant fills all galleries) · Bosch in-tank fuel pump ($300) · Turbosmart “supersonic” Blow off Valve (with trumpet which is currently removed) ($389) · Turbosmart Bleed Valve · Cypher Industries Oil/Air seperator ($150) · New R31 Aussie delivered radiator · After market 16 inch thermo fan · Aftermarket 3inch dump pipe · 3” exhaust system with high flow cat (wicked engine note) · New Nissan supplied OE water pump · 5 stud conversion · R32 GTR 298mm disks with matching GTR 4 spot calipers (front) – Calipers fully reconditioned · R32 GTR 300mm (I think?) disks with matching GTR 2 spot calipers (rear) – Calipers fully reconditioned. · Over $700 of Endless Brake Pads · New slotted GTR disc rotors all round (I replaced them, wouldn’t have done 5000ks) · Pedders “Sports Rider Suspension and Springs” with new bump stops, urathane bushes ($1269) · Greddy turbo timer ($140) · Hi-Cas disabled. ***************NOTE - MOD PLATES AND ENGINEERING HAVE BEEN DONE************ Interior Modifications · MOMO Gear knob ($130) · Sony CDX – M800 head unit · JL Audio 6.5” splits (front) · JL Audio 6” x 9” (rear) Exterior Modifications · Projector headlights · R32 GTR 16” x 8” rear rims painted in RAYS Engineering Bronze · R32 GTS-T 16” x 6.5” rims painted in RAYS Engineering Bronze · Near new Azenis Semi Slicks all round · Stove top rear end General notes regarding the car: This car handles and brakes amazingly well! There is no way you could ever experience brake fade on the street, the brakes are fully set up for track racing. With this in mind the brake pads used were bought with regular street use in mind (they won’t damage the rotors). I’m asking $12,000. Negotiable. It will be sold with Rego till January 07. RWC upon sale, I will supply all papers with modifications.

Thanks for the messages. Someone called me this morning - This is now SOLD. Cheers

I have a 240km/h Tomei Dash for sale. I got it as an extra when I bought my skyline - but I never installed it. I've been told these are hard to come by and go for a bit - so I'm asking $300, negotiable. The dash looks like it's in very good condition, although I haven't tried it out myself. It is a cable speedo dash. I live in Holland Park - 15 mins from Brisbane city. I'd prefer pick up only at this stage, but may consider posting if the buyer pays. Dash1 Dash2 Dash 3 Cheers

These are now on ebay - bidding started at $1 Am willing to settle outside of ebay. Cheers

These are now on ebay

Price is negotiable - just make an offer. I'd rather sell them here than on Ebay.

I'm after a change in plates - these came with the car when I bought it. They are slimline black and white personalised plates. As you can see in the pics they are in great condition. The rear plate has been cut to fit perfectly for a GTS-X. It costs around $65 for Queensland Transport to change the plates over. Just need to fill in a form and pay the money at the counter. If you wanted a different colour to suit your car I'm sure it could be changed. The plates cost $400 originally, as they are obviously very unique I want a bit more than that - but I'm flexible on the price. I'm after $800. Cheers

This complete package was SOLD on the weekend

This complete package was SOLD on the weekend.

The cheapest at this point is $1200. If you just want the head seperately please make an offer. cheers

Ok, I'm moving house so this all has to go. I'd prefer local pickup to save me the time and effort freighting an entire engine, but if someone interstate makes an offer and is willing to arrange the freight it should be ok. I'm dropping the price to $1300 for the whole lot. this includes a turbo with all the lines which is in great condition ($400), a complete head which is in great condition, and ported (worth well over $1000 alone) and all the other bits and pieces in the photos - waterpump, oil cooler, bottom end, complete intake manifold with injectors etc etc. Please PM me with any questions or offers. Cheers

Thanks Muz and Green_s13 for your interest. I'm negotiating with someone at the moment for the complete head and inlet manifold. If this goes through I will be able to sell the turbo seperately. I'll let you know in a day or so. Cheers

This price is negotiable. If anyone has any interest please make an offer. Cheers

Rest of pics... New Welsh Plugs

RB25DET # Block - No scoring or noise - needs coolant flushed out, blown head gasket. # Head - Ported Exaust Ports, Machined And Blasted With New Welsh Plugs # Intake Manifold # Exaust Manifold # Turbo - good condition, very little play, good bearings, seals, no scoring. # All Sensors # Exaust Gasket, plus intake gaskets This is the complete engine, minus coil packs, loom, ecu, flywheel (manual spigot) or altenator. Location: 10km From Brisbane Reason for sale: Bought an import 31 with a modified VG30DET and am no longer seeking to build a RB30DET... Was going to use a 30 Block... 25 Block is still good tho... Price: $1,500 Negotiable pics... The above pic shows the port work done to each exaust port Sorry could not be bothered degreasing turbo...

Rest of pics.... New Welsh Plugs