jeffworld2

probably useless but i have 2 sets of blown 32 gtr turbos here off some old motors

ok have just pulled the turbo side out of the car to put the single back on. adaptor plates and complete GTR exhaust side are sitting here i will make a new thread with all my engine and performance equipment

Hi everyone Just wondering where i can get a front bar for my GTR. I can't find anything other than trust style or do-luck which is not ideal. I have the factory one but want something a bit lower for racing and will keep the factory plastic one safe. I like the Yanack and top secret styles but cant seem to find them. Even a fibreglass version of the stock bar would be great but they all seem to be for gtst's, anyone stretched one to fit? Opinions and suppliers welcomed.

PM XIZOR I dropped off his front bar in ingleburn industrial area somewhere and they did a decent job. don't remember where. It's easiest to glue something across behind it and patch/paint

PM me your address + number i have a mate in colo vale who will happily pick it up for me.

i have a set of r32 gtr v spec II rims, the meshys. PM if interested

Hi everyone, The front bar has sold, but indicators are still available The wing is on hold for NYTSKY rest is still available, cant beleive the series 2 lights are still here? lol

This bar has had a lot of interest but is currently not sold. To the guy from melbourne who is trying to organise freight: give me a call

they are ALMOST interchangeable... the only difference between series 1 and series 2 parts is the inside corners of the headlights. the series 2 have a sharp corner while series 1 have a curve. You can fit a series 2 bonnet on series 1 and not the other way around. Front bars are also interchangeable, it is the grille that cant be swapped. You can see the damage to the front bar on the photos, its really not that big a deal to have fixed. I never bothered because it was the spare front for a track car. I would repair it now but i havent the time to respray it again.

items located in Glenfield near liverpool/campbelltown, but i live in petersham and work in the city depending what your after Series II carbon bonnet. The 400r bar is one moulded fibreglass piece, but you could always cut it. asking 150 for the bar as it has the corners damaged. ok dave you got the wing lol. don't take too long i need the cash

Hi everyone! I am selling a few body panels here in varying colours, all from R33. located in sydney and much prefer pickup or i can deliver items to you around sydney. Series 1 Bonnet- maroon- $100 R33 bootlid with rare spoiler- some have told me its veilside but ive never seen it anywhere- maroon $200 Series 2 headlights good condition- $350 Carbon bonnet and pins- few small cracks where it was flexing but nothing that shows really. Ridiculously light you can pick it up with 1 finger- $400 sold Carbon look radiator air guide- from group buy a few years ago. - $50 400R bar- freshly painted but damaged slightly on the corners. sold 400R Genuine Nissan Clear front indicators- $80 PM preffered or give me a call on 0419 472 543. most items are negotiable for quick sale.

Have r32 gtr and r33 gtr bovs, and an r34 one if you are interested. should have mentioned it when you got the seats

Hi sounds like you're doing the opposite of what im doing I have a set of new whiteline swaybars for an r33, their largest possible special order size. from memory it was 27mm front 24mm rear but can check for you. Also have a power fc and z32 here Also have a greddy copy plenum currently fitted so obviously working fine. As are my 750cc nismo injectors All these parts are coming off my line so may as well find a good home. I'm in syd pm if interested

hi mate I'm in sydney and im interested in your complete motor, as long as its still in good condition and wasnt damaged in the hit. Alternatively i'm after your turbo, the coolant lines and oil lines for the turbo send a pm if the motor is good. Thankyou jeff EDIT: maybe intersted in whole car too!

im still keen for a meet

Hi all! Jut to let you know my r33 will be there, I will bring photos of my r32 though i need to show Gemma! Unless you want to visit first? havent seen anyone in a while will be good. Ta

if you want to make the trip to glenfield im keen

My rb25 was rebuilt with acl bearings, gtr rods and new nissan pistons to suit the hks turbos. I would value it at around 2.5k with nismo 750cc injectors and greddy style plenum whatever you value yours at will obviously affect cash either way, but it is much easier to change an engine than a turboswap somehow! If someone showed up with a running r33 i would swap motors for 4k i guess. I have so many parts here it would depend on what you wanted

Hi all I am selling my setup, I have been running a twin turbo rb25 for around 4 years now. It is installed into an r33 GTST and is running if anyone wants to try before they buy. Reason for selling is I have purchased a track only car and the r33 cannot tow it. Includes: Adaptor plates and bolts gtr turbo manifolds r33 gtr turbos w/factory dumps intake flanges for turbos alloy intake piping+ 2 brand new pods Turbo side intercooler piping 3" Twin turbo pipe + rear turbo outlet Cold side- either piping to suit greddy style plenum or to suit standard plenum BOV flanges are on both piping setups, have some here if you want. Silicone joiners to suit intercooler piping + Tbolt clamps where applicable T pieces and lines for wastegate actuator boost feeds. AAC valve lines custom braided oil lines and banjos (2) custom oil drains (2) custom water lines w/banjos (4) custom heater hose joiner That all adds up to around $3000, including anything i have forgotten i dont think i have overpriced anything really. You can also purchase my injectors, greddy style plenum and rb26 covers etc. if you like, or i will take offers on the car itself and i am interested in swapping complete motor for a complete standard 25 + cash my way This is all direct bolt on to an rb25 or rb20, and will make the same power as gtr turbos do on a gtr. Turbos are off an r33 gtr motor and are running off wastegate pressure since installed in my car. The car had previously twin hks gtss turbos running 1.4 bar without issues. these are now on the racecar. Basically its all running you can test it, and i can even fit it all for you if you like. This car has been my baby for a long time and i love the sound of this setup. I can install it all into your car too if you need. Mine is all running on a Z32 AFM and power fc.

thanks everyone think ive got everything sorted

Hi all im trying to finish off a project and i need a few ignition loom parts. I need a coil pack loom for either a 26 or an r33 series one (same coils) and an igniter pack and the ecu-side plug for that igniter pack so i can wire it in. any help appreciated, new or used parts Located in sydney

Hi mate im interested in the bonnet. Im from liverpool so can pick up

Hi all Looking for a power steering pump bracket that bolts to the block and holds the pump out After one for an r33 gtst pump, preferably in sydney somewhere so i can pick up

If you have a non-ABS model I will happily grab a lot of the brake hardline parts in the engine bay. send me a pm

I have drivers seat here in sydney, its the bluey/grey colour in excellent nick 150 pm if interested