jeffworld2

hey after a bonnet for my gtr in syd, have a carbon one right now and need to get a blue slip so has to go. Please PM if you have something cheers

hey mate where are you? happy to take cooler

Or a decent vacum leak, if it wont idle but runs if you hold the accelerator down a bit you've probably popped a boost controller or bov etc hose

Hi I'm after some interior parts, the Ignition/steering column plastics, the kick panels, map light etc. also after the front wheel arch plastics if still there. please let me know if you have a fair bit left and i will come round.

Hey Im after the front wheel arch plastics if you still have them? Please pm if you do cheers

kick panels and ignition/steering column plastics still there? would need them posted to Sydney. Also after the map light

Hey Fatz looking for: Centre console Inner guards both kick panels sun visors map light intake side breather hose? Engine bay aircon parts sump with ext. hks intercooler and hks piping charcoal canister? Let me know whats left, will come pick up when you're back

hi mate Wondering if you were using the hks spl piping kit still? if not ill gladly take it off your hands. i know you don't have the intake pipes but same as you im after the turbo-intercooler piping

hey Looking for computer from the boot for my 32, will take anything gtr/gtst will figure it out and make it work, no hicas anyway. Located sydney cheers.

Hi i'm chasing a few things: Power steering computer from boot a pillars sun visors door sills ignition surround charcoal canister horns from rad support chuck me a pm if you can help. in syd so probably can pick up.

I have wired up a few skylines now, let me know your issues and I should be able to help. located leichhardt

If it helps i have 4L of nissan ANO 1993, $100

Camber arms sold

Hey pete thanks for that half cut. still chasing a few little things I'm after front seat belts, including the buckle side and the funny bracket thing at the bottom door sill. Only want good nick, not stretched out in an acco as im going for rego Also after the interior trim around the ignition barrel / steering column. Also after the loom and lock solenoid/motor/whatever they have from both doors if you've gutted any Flick me a pm on those please

located glenfield nsw 2167, or leichhardt nsw 2040

i have no idea on postage to hobart, will see what i can get tomorrow. carpark there has been interest in camber arms but they are still here. coil pack cover is from r33. Only asking $10 buy it and paint it or modify or something

SOLD: GT Wing All 4 R32 Turbos R33 undertray ADDED: SAFC photos, found the Loom for it. Also have PDF instructions in english. Its the old one and was off an r33 gtst

Undertray gone, timing covers gone.

I will find out and get back to you

some details of the intercooler piping bits on offer R33 GTST GREDDY fmic piping kit, cold side $50 R33 GTST piping from Throttle body to drivers guard, without going over to the exhaust side rocker cover, kept room for big turbos $20 First pic shows GREDDY piping and the black/silver pipe (was black now painted silver) R32/R33 GTST piping with 2x bov from throttle body to standard intercooler holes on passenger side, again keeps room for big turbos $20 GTR turbo setup piping instead of "twin turbo" pipe, crosses behind radiator. Had used in conjunction with the above pipe with 2 bov's to use the gtr manifolds on the rb20 $50 (comes with BOV's) The approximate layout, with bov's positioned to plumback in front of gtr turbos. I do not actually have pics of the grey pipes on a car as they were on Jago's rb20. priced basically because they have 2 BOV's. also selling the adaptor plates to allow gtr manifolds to bolt onto rb20/25 exhaust side. where on my r33 for around 4 years $150

All sorts of crap for sale and plenty more not listed, if you see something in the background you want come get its all got to go. Located in Glenfield in sydney. Call/sms 0400 604 293 or reply on here. TURBOS R32 gtr turbos, blown $20 R32 gtr turbos with actuators, working fine when removed, never boosted hard they were for running in only $100 R33 GTr turbos, removed from motor I got for the race car complete with dumps etc. I will keep the 02 sensors though $200 Custom GTR dumps and front pipes, nice merge from the wastegates. $200 from turbos to cat RB26 exhaust manifolds/ heat shields $20 each Custom gtr turbo inlets, front and rear. Provision for blowby but removes plumback for BOV's $30 ENGINE BAY R33 plastic undertray $10 R32 GTR radiator overflow tank $10 R32 GTR washer bottle $10 RB25 coilpack cover $10 RB25 Inlet manifold with bolts and gasket. $20 RB26 Front Timing cover Black and Clear $20/$40 R33 GTST a/c auxillary fan $10 R33 GTST GREDDY fmic piping kit, cold side $50 R33 GTST piping from Throttle body to drivers guard, without going over to the exhaust side rocker cover, kept room for big turbos $20 R32/R33 GTST piping with 2x bov from throttle body to standard intercooler holes on passenger side, again keeps room for big turbos $20 GTR turbo setup piping instead of "twin turbo" pipe, crosses behind radiator. Had used in conjunction with the above pipe with 2 bov's to use the gtr manifolds on the rb20 $50 (comes with BOV's) MECHANICAL R33 GTST intercooler and piping $50 R32 GTR brake booster $20 R32 GTR clutch booster $20 R32 GTR factory pedals $10 each R33 GTST Brake lines front and rear $20 R33 GTST Front rotors still plenty of meat $50 R33 GTST throttle cable $20 R33 GTST Fuel pump with bracket, use to mount your bosch etc so you can do a quick swap $20 R32 GTR gearbox mount $10 R33 GTR water pump- replaced with N1, still in good condition $10 Power steering pump bracket $20 R32 GTR clutch fluid loop $10 BODY/STYLING 3d GT wing with brackets and stands, everything needed to fit, as new $100 R33 front reo, hacked up. Keep yours and use this one $30 R33 Boot in maroon / wine red $50 4L of Nissan ANO paint for series one R33 $20 R33 GTST factory wheels with tyres (4) $100 Wheels that came on my shell, fit GTR ok but don't clear my big brakes on the front anymore. Used to basically roll the shell around. (4) $200 SUSPENSION S14 or R33 rear camber arms, brand new never fitted $100 R33 front castor rods, rubbers gone, put some new bushes and off you go. $10 R32 GTR steering rack, rubber great $40 R32 GTR Standard front upper arms $50 INTERIOR R33 gtst parcel tray support $5 R33 Jack bracket in boot $5 R33 ecu bracket $5 Blitz boost gauge $5 Apexi SAFC $50 S14 ECU and AFM from the same car $80 SR20 engine Loom $100 RB26 loom suitable for making a haltech/motec loom etc, has connections but a clutch went and damaged it near the wiper motor. I had planned to use it to make a loom for the racecar. $100 The other loom pictured, I think is for sr20 aac etc don't remember. If it looks like what you need then grab it.

Hi guys need to get rid of this, if no takers will recycle it. If you give me $50 its yours, thats what they would give me. R32 GTR Half cut, pretty much everything is off. Have included pics of the chassis rails as they are pretty good, passenger rail is perfect. The whole thing is straight so if you've dinged your car buy this and weld it on lol. Pickup in Glenfield in Sydney's south west, I can deliver if needed to anywhere in sydney as it fits easily on my trailer. Can be picked up by 2 people not that heavy. Call 0400 604 293 outside business hours or PM

I did this when i had the gtr turbo setup on my 25, meant i could have both turbos fed through the one z32. Had no problems running that way. I had one big pod, one big afm then it split to the front and rear turbos. still have the pipework but i guess its the opposite of what you were thinking Eventually moved the z32 to the cooler piping so i could run 2 pods, but never really had reason to do that. Just wanted to look more like a 26 in there.

what sort of power do people get on the standard computer these days? ive never had one say for example n1 or gt ss turbos with turbo back exhaust

have you still got the airbox? can pick up