have any of you guys had a problem with stalling and the engine cutting out in all sorts of driving conditions, not just at low rpm? This is the problem that I had. I say had because I think that I might have fixed it. I cleaned all of the electrical plugs in the engine bay, cleaned the air filter had the voltage tested on the battery,altenator and fuel pump,leads and spark plugs were all good and gapped and firing fine. My mechanic even used my car as a daily driver for about 3 weeks, but Murpheys law would tell you that nothing happened when he had it.
For about 8 months nothing happened, no stalling,power cuts or jerking and about 3 weeks ago it all came back with a vengence.
Every time I drove my car it would stall and have huge power cuts when drivingat speeds of 30km/h to 110km/h.
Then I remembered something that the guy that installed my alarm and turbo timer told me, that my computer wiring had been hacked in Japan. Not all of it only a few wires.
I thougt to myself it cant hurt to take a look..... And there it was 2 wires joined together with no tape around them. Alittle test started the car and touched the wires together and the car stopped. Start her up again the same thing.
So I soldered the wires up and taped them up and not a single problem for about 2 weeks.
It might be related to your problems so I thought it was worth the mention:)
cheers Jon