lukes146

Hey guys, I've got a 96' s2 R33 which i've owned for about 3-4 months now. I took it to get a wheel alignment and balance yesterday and the blokes there informed me that my springs are too short for my shockies so virtually every larger than average bump in the road i go over my shockies are bottoming out! Which I have noticed as my car is fairly rough on bumpy roads. Now i'll be the first to admit I have limited suspension knowledge, but the guys suggested coil overs are the way to go but my mates have coil overs in their cars and they bounce around like crazy, i think they should be left for track cars.. What would be the best/cost effective way for me to fix this? I'm after a little comfort, but mainly performance - i also need a set up that will allow a bit more traction..

The Pioneer Revs are AWESOME! You won't get a better speaker at that price, I had them in my mr2 on their own and they were insane, now iv'e got them again in the skyline in the front and their just as good in the bigger cabin...top sound amazing bass from a 6.5 probably due to the kevlar build and super clear trebble, the tweeters are perfect too

My R33 gts-t s2 is my daily driver, I get between 250-350km per tank depending on how im driving. On that note 350kms out of a tank is the most i've ever gotten and that was on the highway so obviously I have a problem lol, Last fill up cost me like $82 in newcastle BP ultimate. Mods are: 3.5" inch cat back exhaust, hi flow panel filter, FMIC, stock boost.

hahahaha, love that ethiopian joke. alright you might have found yourself a buyer. Do you have the receipts for the build? and why are you selling the turbo?

will it be a direct fit to a 96' s2 r33? The only mods i currently have are front mount intercooler, 3.5" cat back exhaust (getting dump and cat done this week) would i need any other mods to support the turbo? or could i just get a mechanic to whack it on with low boost? Also when does the turbo come on boost? do you have any dyno graphs?

Mine also has no hole.. I removed this boost controller yesterday because it was spiking like crap, not holding boost in anyone spot or anything. I had it installed by a mechanic and then checked by a mechanic, everything was in order.. I suppose u get what you pay for. EBC on the way

Hey lads, Just wondering how to use this stuff as it doesn't specify wether you apply it in a ciruclar motion or an up and down straight line motion, if you dont know what the product is its basically a cut/polish. From past experiences products differ in the way you apply so before i go to work i want to know which way is right. cheers, Luke

So there is a restrictor in the stock hoses? I'll do what you said though tomorrow maybe thats why my car wasn't pulling anything on the dyno...lets just hope the mechanics are hopeless in all respects and that thats the problem i'll have to get a fresh dyno from elsewhere after i fix the boost cut problem, is there anything else that could cause a boost cut?

the mechanic hooked mine up, whats the stock solenoid, and how do i check if its there and if so remove it?

the turbotech mechanical boost controller...the one thats had like 36 pages written on it here..I'm pretty sure thats what it's called.

Yo! I took my car for a run tonight with a mate who's practically a mechanic to see if he could figure out why my cars running so slow. Anyways the turbotech is set at 10-11psi but was spiking from 12 to even close to 15psi at times partiuclarly in 2nd gear, whenever it spiked to that amount my car would make this rapid muffled sort of backfiring noise and lose a huge amount of power.. My mate told me it's the boost cut... From what i know theres a restrictor in one of the hoses that connects to the turbotech, if the mechanics left that hose there and didnt take the restrictor out and just connected it to the turbotech would that be whats causing the problem? and is my mate right about that noise and power loss? Cheers Luke

ah thanks for the advice boys, i'm going to go to RX Engineering here in Newcastle, they have a pretty big rep so hopefully they can sort it out, hopefully my wallet can too lol. Cheers.. Luke

yeah thats it, the air to fuel ratio, im not sure what it is off boost but on boost its 11.4...I've only owned it for a month and from the moment i started driving it i've always thought it felt way too slow for what it is. So i asked a few mechanics, they drove it and said it was fine..Finally one knew what he was talking about! It doesnt feel OVERLY slow though, but not quick by any means. I won't be able to get a copy of the dyno sheet until next week unfortunately, today was just a quick freeby 20min dyno run to fit the turbo tech. I'm hoping theres nothing too wrong with it! what else could be causing a big loss in power, theres no wierd noises, its making proper boost, no leaks or anything..And no the timing hasnt been checked, i'll make a note for him to check that though. cheers

I fitted mine today, its set at 10psi, but a wierd thing happens say im boosting hard in 2nd change in to 3rd and quickly jump off the throttle my guage for some reasons jump VERY quickly to 15-20psi and then straight to 0psi...Is that normal?

Hey guys! Just got off the dyno with the R33, and guess how much power it's making with front mount, 3.5" cat back exhuast, turbotech boost controller running 10psi and a high flow panel filter! A quality 104rwkw!! WOO haha. Not really, actually quite frustrated Luckily we know the cause of the problem, it's running WAY too rich 11.4% or something if that makes sense to anyone, apparently it's meant to be at 14% (though i could be wrong with the % i think its actually a ratio of something) Whats funny is that i've told 2 mechanics already that it's running too rich and they've said it fine, I told this one and he decided he'd put my theory to the test and i was right, for once haha. Hopefully it's going to only be the O2 sensor, i've just hit 40,000kms now and apparently they go every 40,000km. so right now it's making about 80kw less than what it should be! I just cant wait to get it running properly On another note, after installing the turbotech ive noticed that when im on full boost and back the throttle off suddenly the needle hits like 15-20psi very very quickly and drops straight back, is that spiking, or just normal?

luckily i haven't brought it yet lol, i'll always check here prior to a purchase, thanks for that thread champ, i guess i won't be buying it.

yeah good point bro, in the FAQ it says it can be used with forced induction etc...No idea if it's all bull shit or not though

hey guys! Just came across this on ebay and for $35 it's got me interested ITEM just wondering if anyone has any experience with these? good or bad? apparently this is how it works "It will modify any standard ECU by telling the ECU that the incoming air in the intake system is cold and so advances the ignition to compensate producing more power. In many cases fuel economy is increased too. Power is increased by up to 15BHP and torque is increased significantly. " On an R33 they claim: "Nissan Skyline R33 GTS + 15BHP" so what are our thoughts lads?

Hey guys, Has anyone heard from Mark lately? I brought a unit from him two days ago, emailed him twice and have heard nothing.. I need the unit by tomorrow as the car is going to the mechanics for a variety of other things and i wanted to get it all done.

Hey guys, Just having a read through the new HPI mag and saw that otomoto.com.au are now supplying KKR straight bolt on turbochargers at ridiculous prices, i'm looking at getting the KKR480 (480hp rating) for $899 which croydon autosports made 242rwkw out of at 18psi on an rb25!! Just wondering if anyone is using/experienced one of these turbo's or if you know anything about them? Also what amount of power can an rb25 fuel system handle? Cheers

I would love them dude, email me on [email protected] please, cheers

Ah thanks heaps for that boys! everything makes sense now, i'll post up how it goes later today

Hey guys, Just got a croydon style intercooler and am in the middle of attempting to figure out how the piping works, but the boys and i can't seem to figure out where it goes! Croydon said theres no cutting/welding etc involved and that it was a straight bolt on, but it doesnt appear that way.. Does anyone have instructions or any helpful advice? Thanks! The attached picture shows the kit.. REPLY ASAP

Hey guys, Just got a croydon style intercooler and am in the middle of attempting to figure out how the piping works, but the boys and i can't seem to figure out where it goes! Croydon said theres no cutting/welding etc involved and that it was a straight bolt on, but it doesnt appear that way.. Does anyone have instructions or any helpful advice? Thanks! The attached picture shows the kit.. REPLY ASAP

I thougt that, but the noise comes from the front left hand side of the engine and no where else, very dumb founding! Well its going to the mechanics today to find/fix the leak hopefully the noise and figure out what that weird smell is, i just hope they don't charge me out of my now bankrupt arse.