ardie

Ok had a developement, put in a brand new master and still nothing, clutch pedal has more force, but it must have just been a coincidence that it was on its way out. Im pretty sure the system was bled properly, but I doubt that the clutch would have issues becasue there were a few minor air pockets anyway, i definetely know i got rid of most of them, i mean i probably used 1/4 of litre of brake fluid, ill go back and check it today Im dropping the box today and going to have a look at the clutch as I can still smell it burning as it starts up but it doesnt disenguage when pumped/released. Im thinking that it may be an issue with the pressure plate or thrust bearing, however I really wont know until I get in there. If anybody has any other ideas it would be appreciated.

Ok went down and looked at it using better light and the master has carked it, problem solved

Haha yeah my bad always mix the 2 names u Thanks for those diagrams mate, really appreaciate it. Checked all those points for leaks, but didnt have a great view as the car is quite low, as mentioned before I will be throwing it on a hoist tomorrow So everybody is of the same thought that its one of the two?

Yeah I had a brief look at the firewall but the wasnt any fluid leaking from what I could see

Today I was driving my mates 32 and as I took off quickly from a round about and the clutch slipped slightly, then as I drove away the car wouldn’t change gear and the clutch pedal had lost all pressure. The symptoms are: 1) Clutch pedal has no pressure, goes straight to the ground and right back up again with no resistance - rules out pedal box issues 2) Car will idle in neutral but will not go into gear while running - rules out selector fork issues 3) While idling in neutral there is a faint smell of clutch 4) The car will go into gear when not running but as soon as you start it in gear, even with the clutch in, it stalls out My friend told me that he had previously had the pedal become soft and had to top up the clutch fluid but didn’t bleed it, and then when we popped the bonnet today the reservoir was again low (we topped it up, go REPCO!). Given these things we think that it’s the master cylinder, however I just thought I would check if there were perhaps anything else which could be wrong as when I checked I couldn’t see any leaks from the master, however the car is quite low so I couldn’t get a good view, I will be putting it up on hoist tomorrow.

Will accept offers, really have no use for this atm

Item: Garrett 42 mm external gate with 9psi spring Age: unknown Condition: Used but good Price: $350 To Fit: (What car) anything turbo Location: Launceston, Tas (WILL POST) Contact: on here or via PM Comments:Hey guys up for sale is my . Its in good condition, got a bit of ware and tear, nothing too extreme though. Worked a charm on my car and only reason I am not keeping is my new setup already has a gate. Reason for selling: Revamping my whole turbo setup.

Any auto store. Just get a brass t piece, dont liek yur chances of snapping one of those, otherwise if you really have to get a real one Im pretty sure I have a few sitting around here

Well due to a complication with our tow car I am in need of somebody to tow my car and was wondering if anybody who's heading down to Basky this weekend would be able to help me out. I have a trailer and will pay for all your petrol money. Random I know, but this only came up today and I dont really know anybody who isn't using their tow car already. If anybody could help with this it would be awesome. Cheers Ryan

Will consider swaps for Te37's, BEE*R's, Xd9's, Meisters/Professors in a 17 X 9.5 sizeing

bump

Item: MOMO millenium steering wheel + steering wheel spacer GREX gearknob Age: unknown, came with car Condition: MOMO= good. GREX= perfect Price: MOMO = $120 GREX= $40 To Fit: (What car) Anything Location: Lunceston, Tas WILLING TO SHIP!!! Contact: on here or via PM Comments:

Item: Electronic climate control: $200 Centre consle: $80 Roof lining: $40 Door trims (L+R): $80 each Front seatbelts (L + R): $60 each Kick panels (L+R): $30 each Passneger seat in leather: $200 Rear seats in leather: $200 Rear parcel shelf: $50 180sx floor mats: $150 Glove box: $50 Sun visors: $15 each Door scuff plates: $20 each Map Light: $20 Centre Roof Light: $20 Moulded floor carpet (has a slit down middle where it slides under dash, hidden when in car as its under the dash): $100 Age: Well they are from a 97 type-x so you do the math Condition: Used, but very good in the majority of cases Price: See listing To Fit: (What car) 180sx/s13 Location: Launceston, Tasmania - WILL SHIP!!! Contact: on here or in PM Comments: I recently went through and stripped the remainder of trim from my car and its never going back that way so I have no use for these. The majority of prices are negotiable and I am willing to ship within reason, if you are after something that isnt listed, feel free to ask as I may still be able to help. PICTURES CAN BE SUPPLIED UPN REQUEST

PRICE DROP $350

PRICE DROP $2,700

Would you be willing to sell the semis on their own?

Item: One set of 4 works VS-KF chrome rims (5 stud) FRONT 17*9.5 and BACK 18*10.5 Age: unknown Condition: good, few minor marks Price: $3,000 To Fit: (What car) anything 5 stud Location: Launceston, Tasmania - willing to ship Contact: in here, via PM or on phone = 0415658595 Comments: Up for sale are my VSKFs. I dont know the offset of them as they came on the car from japan and the size markings on them have worn off however they just slightly stick out of my standard guards that hav been lipped and ever so slightly rolled. The fit is awesome as Im sure anybody who has seen the car with them on will agree. In terms of sizeings, the fronts are 17 by 9.5 and the rears are 18 by 10.5. I can take other measurements if anybody would like. Just to give you an idea of what they look like, below are a few pictures of them while on my 180. Sorry about the average quality of pictures, I will take some more of the full set off the car once I get a chance Feel free to PM me with any questions Cheers

yeah it better be done mofo!

Hey mate are you neg on any of these? If so Ill take the swaybar and cage, can arrange for pickup this saturday at round 3. Cheers

Hey mate are you willing to sell the HKS gate on its own?

Hey mate did you get my PM about the gate?

Yep Trav is going to be moving in not this weekend but next weekend.

Item: Custom VIC plates DARK.33 Age: 2 years roughly Condition: Good Price: $500 To Fit: (What car) Only really for an r33 but hey thats your decision to make Location: Launceston, Tas BUT WILL SHIP! Contact: Replay via pm or in this thread please Comments: Had these on my old R33 when I moved to Tassie a little over 8 months ago. I sold the car and these have been sitting around here for a while and I have been to slack to put them up for sale. They are no use to me and are just sitting gatering dust. Pictures will be coming within the next couple of days (digi cam is on loan)

On the weekend I went to the track day and wore a helmet in my car for the first time, only to find out I don’t fit in my car as my helmet hits on the roof. So basically I am looking for somebody who has a fixed back seat so I can side mount it and drop it down for clearance. The seat needs to be of a similar quality to mine for the swap and may consider cash adjustment either way if need be. Ill get some photos up in the next day or so, would preferably like a Bride or other notable brand, if anybody could help me it would be much appreciated. Cheers

Awesome turbom would reccomend it to everybody running a 2lt. I run one of these on ym SR and the response is monster, 22 psi makes 250 rwkw