Chi100188

alright boys i took it around the block to see if the car has any leaks etc if everythign is running perfectly guess ill have to wait to the 5th for the tune

Hey guys i just got my car up and running today took it for a drive around my block to see nothigns leaking etc its got a Power FC thats not tuned and has done the learning thing, Z32 AFM, Nismo 740c injectors and Apexi Power FC boost controller kit and HKS 2535 and front mount....as i was taking it around the block when i press the accelerator the car would splutter lose power and not rev but if i was sitting still the car would be idling fine and if i free reved it like when not in gear it'd rev? mmmm so have i fouled the spark plugs ? my plugs are 7 heat rating coppers with a gap of 0.8 and when i free rev it theres alot of smoke coming out the exhaust black smoke. Cheers Chi

hmmm so basically just spray it on do i need to cover ne thing? like the fins etc? Cheers Chi

mmm when i got a yellow and went to the pits i went to the gosnells one *i had a yelloow for a T wing* i got this guy with like skin disorder and he raped me :? saying my suspension is wayyy too hard and couple of other stpuid stuff so i got my mom to take my car over at welshpool and it was done in less then 10 secs so yeah if i was to get a yellow again ill get my parents to take car over LOL

i used Mobil Fully Synthetic 5w30 b4 was good but then i changed to the best Motul 300v Chrono 10w30 even better

when it was idling it was super lumpy heheh rough as mmm ill change the plugs tommroow is that 0.20ms or 20 ms? lol and is it + or - mikey

hey i did above settings the car won't crank over its like trying and trying and also the knock goes to 50 so have i stuffed something?

i've doen a search already mate....it only comes up with 550cc.....i wouldn't of opened a thread if i could find my answer lol

alright cool mmm my power FC was resetted....because i couldn't change the injector settings so do i have to redo the idle setting again and then do the injector latency or should i do the injector latency first? Cheers Chi

how did u get that figure mate?

anyone?

hey paul i just installed nismo 740cc...and the car doesn't idle and runs super rich and sounds like and RX7 the settings i used is on here: http://www.skylinesaustralia.com/forums/In...gs-t249191.html so is this the right settings i got 50.1% is buy 380cc / 740CC = 50% and i got 0.14 is by 0.66-0.582 i wil be getting a tune later on in the week or next but im just wondering is there a setting where i can drive the car to the tuner? any help would be good Cheers Chi

so theres no way i can set it to make it sound/idle just a bit normal?

Hey guys i just nismo installed 740cc injectors and i can't get it to idle? it sounds like a RX7 lol....but yeah here are my settings for the new injectors. My ECU is a Power FC this is for the RB25DET No.1 50.1% -0.14 No.2 50.1% -0.14 No.3 50.1% -0.14 No.4 50.1% -0.14 No.5 50.1% -0.14 No.6 50.1% -0.14 The negatives might be positives any help would be good Cheers Chi

hmmm i guess ill change to copper washers i mean there is a reason why nissan used copper and not steel + rubber

mmm the guy at pirtek told me it would never leak again so should i still grab some copper ones? Cheers Chi

Hey guys just got a question im wondering if its ok to use steel washers with rubber in the middle for the turbo feed line from teh block? like where the copper washers go? im asking this is because Pirtek supplied me iwth these steel washers with rubber in the middle i think cause they didn't have any copper washers? so im just wondering if i should go out and buy the copper washers and replace? Cheers Chi

are u serious! can i come get it tommroow lunjiaow? hahah

yeah got new injectors but lost like one of those black washers

Hey guys i just removed my injector rail and there are these black washer looking things i suspect they go under the bolt to act as spacers? or something are these black spacer things important? im thinking that these are sposed to go under the 3 bolts that u take off to take out the injector rail any help woudl be great and where ca i get some of these black plastic spacers/washers Cheers Chi

in a datsun 240z would look hell sex

hmmm would i be able to fit the rears with rolled guards? or do i have to get wide body to fit these? Cheers Chi

Hey guys im looking at purchasing some rims for the R33 these rims, the size of these rims are Front 18x9 +18 and rear 18x10 +18 car is a R33 GTS with GTST front brakes Cheers Chi

hahahahah OWNED

man so sorry aye :? ill keep an eye out down here SOR im a delivery boy so i drive everywhere good luck to find them bastards and give them a hiding !