brizzi

For sale Am performance stainless steel split dump screamer. Bought it few months ago. Only use car for work now, putting back to standard. suits r32,r33,34 rb20 and 25.. $250 ono pm for details..

Hi people. Just wondering how much the injectors can handle and does anyone know what cc volume they are? Planing to get a SAFC neo soon and need to know if you can upgrade them using the SAFC. My mods are: 3" dump pipe back 3" split screamer dump pipe rising rate fuel reg malpasi drift 100mm pod filter 8psi boost {thats all it will let me run max anyway} z32 tt fuel pump. Made 181.4kw on 8 pound Anyone point me in the right position Cheers

There good pay back for someoone who annoy's you on the road! Even better if there window is down

Hi all. Pulled out my slipping clutch this arvo. Did not know what clutch was in it but it is absolute crap! One day it is nice and firm,next day light as a feather! Found that the rivets had broken out of the friction plate that hold on the fiberous material. Car has 181rwkw... Clutch type EXEDY EXTREME ORGANIC. Think i will go clutch like my old car, with new one 3 puk brass button! Did'nt have a drama at all with that, copped a lot of abuse! Overall i think they are very over rated!

Ha Ha, try reving at 3500 at 100 cliks.... Vl turbo box with auto diff.. 4.39:1 ratio.. Good accelaration, bad wheel spin but.

Forgot to mention the missus car is a series1. So whats the deal should I try it and see? Or just let it be? Would be interesting to see thought if it would work..

Hi all doe's anyone know if a r33 auto computer will run in a stagea? We were thinking since stageas are soo detuned you could gain by using a 33 auto computer. Doe's anyone know if this would create any problems or could this quite possibly work?

Thanks heaps fellas,good info

Hi Just installed an oil temp gauge today.. What temps are normal and abnormal? Any info much appreciated

mate if its manual and turbo I may be interested..

Yeah dude.. With heaps of stuff fixed on it.. Man it was ruff when i got it!

Hi i have a r32 gts-t, would like to sell or swap for something of interest.. Car is in good condition. Mods are: R34 gtt rb25det neo engine fully nsw engineered! rb25det 5 speed box recoed 2000ks ago straight cut first to third,c4 tolerance bearings slightly noisy but very tough cost 2k. New modified tail shaft new uni's etc r32gtr speedo drive. 18" 235 40 18 wheels and tyres Trust 450x300x100 front mount stainless plumbing 3" cat back exhaust stainless split dump pipe New castor rods tein rear struts front kyb struts new front upper control arms timing belt changed 4000 k's ago water pump changed 4000k's ago timing belt tensioners changed 4000k's ago Only imperfections paint starting to fade slightly Front bar has cracks... 16k firm or swap for some thing decent,not desperate to sell the car! Car was dynoed 181.3 rwkw @8psi.

Thanks dude Can you re map a r34gtt computer? Didnt think ya could These computers really suck big time!

just wondering, if anyone can help me out? Just want my car to be a good reliable work car with abit more poke and overall performance... Was thinking of getting.... Tuned length stainless low mount manifold High flowed steel wheeled sliding performance turbo injectors fuel pump fuel regulator. z32 afm Just wondering if the SAFC will support these mods, more boost etc etc.. Just dont want a stand alone ecu. Can anyone help me out, cheers

Cheers thanx for that

I wouldnt stress too much Every rb25 i have heared has a ticking sound at idle,it comes and goes. Just drive it till it blows... Then go 25/30

Hi can anyone help? The exhaust on my wifes stagea is annoying! Starting to get holes appearing all the time! Does anyone know if a r33 gts t one will fit? eg cat back, doesnt matter bout mounts, just length?? Any help much apreciated

Yeah dude sure was! I use an old imput shaft cut off a box... I have a 25 box in my r32 and its a piece of cake to get in and out... The starter motor casting is hitting on the tunnel. And the speed sensor.

Cheers man! Thanx for that

My mate came round last night cos his clutch was slipping. We pulled out the box, skimmed the flywheel and installed the new exedy clutch. Now we cant get the F*#*##G thing back in Tried different angles twisting the box around EVERYTHING!!! Anyone know of any tricks? Much appreciated

Me and the missus are in.

i can honestly say that this car has been really well looked after. And any new owner would not be disappointed. The car is a bargain as I know alot of time and work has been put into maintaining it..

All the warnings i have had are; Shifter gets lighter and sloppy, the box gets really lashy,whining noises etc

Yeah they bolt up. But they are crap! I have blown so many i cant count

Hi people. just wondering what torque setting you use when doing up the bolts on the new pressure plate? Any help would be appreciated