DJRIFT

i have some Kai Office height adjustable rear coil overs for sale. they originally came out of an S13 thne i put them in the rear of my r32. they were put in as a temporary measure but i liked them. only selling because i have a full set of height and damper adjustable stuff coming. in excellent condition from what i can see. chasing $250 Bilsteins to suit the front of an r32 GTR or GTS-t skyline. these originally came out of a GTR. they have had extra height grooves put in them giving around 7 height adjustments. i have had them for around 18 months and have never had a dram with them. these can be re built under $250 each. they springs on them are unknown but they are nice and stiff. i can also suply a pair of kings super low springs to go with them. the kings springs are a lot softer. chasing $250 contact me via PM for fast reply.

Well what can i say. its taken me a week to get over last weekends event. for all the people that thought about going in it and didnt. it is very much well worth the money and you have an absolute ball. we however thanks to me had a balls up which cost us a trophy but for a pair of noobs who were just out having fun it was tops. riding around for 3 days in bens car certainly made me appreciate GTRs a lot more. not that i never didnt but it just made me want one. Bens car speaks for its self with the limited mods it sure does perform. Thanks heaps to ben who let me get behind the wheel time and time again. even after a rev limiter 4WD launch. i think ben said. gezz that sure hooked up. so thanks again to ben and congrats to jase and stu.

sold pending payment

still for sale, open to offers.

barington tomorrow and symmons monday is the g o. looks like team virgin is up at the pointy end so far.

what model AVS wheels are the ones on my car? i see model 5 and 6 advertised for sale all the time but they are always different styles.

i have for sale a R32 passenger side dash vent. in excellent condition its out of a GTS-t but should fit GTR as well. i am looking for $60 including post or best offer. please reply via pm for a faster reply. thanks damien

OOOH this is only 6 more sleeps off. should be a fun weekend.

i love this thread. good to see a few local tassy drift cars popping up. i love all the GTRs with big wings and crazy canards. any idea who makes these canards in the pic above? or a good site with some cheap canards to suit GTR stock bars?

theres no harm in that but if you want it all spot on you can buy the right plugs pretty cheap. they are generic 2 pin Bosch EFI plugs. thats what fits the GTR ones that is.

I am trying to pick out a new set for my track car. i Currently have a set of AVS model 5 i think rims. 17 x 9 + 19 all around. there is no way in hell they will fit under stock guards but there is a fair few sets for sale that would. Personally i dont like them that much but they came along at the right time for the right price. I personally love the old school look. work meisters or equips for the plain dish look but if your gonna go dish make sure you have plenty or non at all. pic of my car for reference

found a few things laying around today to suit an r32. i have no need for them anymore. passenger side dash vent. $60 excellent condition climate control unit. X2. $50 each. both in excellent working order. washer bottles X2. $20 radiator overflow bottles. X2 $20 Ash tray. excellent condition. $25 drift button to suit r32. $10 please contact me via pm for a faster reply. willing to post all items at buyers expense.

what brand is the bleed valve and did it spike much?

what side do you need? just get in contact with www.nisswreck.com.au as that will be your fastest solution

hey dave. what size are the springs? diamiter wise. i have a set of rear tein springs that you are welcome to try. they may be softer?

See i knew this would happen.

any possability you can get some pics of the sender units? are they electronic or mechanical?

Thats ugly as gesty by any chance is that $9000 as well?

they defiantly arent worth trying to get a second hand one for the pice they are new. i think Novus put the last few in Kerrys cars. and they are cheap.

Boost automotive or duggan and parker. they are the same thing. on invermay rd. please dont ask how good they are or you will start a massive bitch fight like usual. i personally would go there. ive been happy with my service.

so your fault was in the wiring? had it been pinched during engine swaps?

ill bring a mirror down with the bonnet if you like shane.

how much wider than stock GTR guards would these be? or after re-reading your post would they bring a GTST out to GTR size? thanks

hey all just a few things ive got left over and need to get rid of or to onsell to make way for new items. things marked with an astric are still on the car and can be inspected and aranged to come out once brought. R32 stock silver bonnet. was in excelent nic. been out in the weather for a while now. $100 R32 stock rims. 16x6" 5 stud nissan. i have about 3 or 4 pairs maybe more. $60 a pair up wards depending on tyres on them. work 16x6" rims. i have run them all season for drifting on. black centred with silver outer. look nice. will clear skyline brakes without spacers. $80pair only 16x8" amg style dish rims. painted black in the centre with a polished lip. look ok. wont clear front brakes without spacers. $80 R32 ash tray in excelent condition. $50 Drift button $15 *R32 bonnet. cut doen to look like GTR item. has N1 splitter/lip and has had a nismo Z tune style vent fiber glassed into it. it has also had the bonnet latch cut out and uses top secret style fluch mount bonnet pins to hold it down wich will be sold with the bonnet. it is in dyer need of a pain job as it was only ever done as a quick job in satin black but all the smoothing of the vent was done properly. given a decent pain job this bonnet would look mint. $400 ono as it took a lot of time and money to make and the bonet pins arent cheap. *3 auto gauge gauges. brought new/seccond hand they are out of the just jap pack. 52mm? oil psi oil temp and water temp. they are smoked face and do a calibration dance when they turn on. i have had a special VDO brass T pice made to fit the oil psi and temp senders. that then screws into the standard RB oil psi sender hole. a lot of stuffing around. they all work 100% $150ono with the T pice and a auto gauge sticker. new they are $175 plus freight plus the T pice or an oil sandwidge plate that leaks. *sparco montecarlo or alike? fibre glass race seat. fia aproved. in good nic for age. not worn in the side bolster like most seats. fixed back. black. seat can be bottom or side mounted. $300 ono *recaro low mount adjustable seat rail. has been modified (ie holes drilled to suit) to suit the above seat. will fit recaro seats and even bride seats i belive. $150 ono. or better deal on both. most things are negotable in price. just pm me and discuss. please pm me for a faster reply. i am also keen on trades for stuff of interest. 17x9" rims.

Hey Sam i have never personly seen your car but i can apreciat what you mean by its condition. the main problem is that r32s arent selling at the moment. i know of 2 6k ones up here in launni and they have been forsale for months. they are both buckets of shit thoe. the problem is the market that r32 are aimed at are to young to apreciate what you have. if your not in a rush hang onto it and the right person will come along. if not im afraid you will just have to keep lowering the price untill it goes. best of luck with the sale, if i had the coin i would buy it for sure. i love the clean ones.