MZTRBO

Good questions; It is to suit external gate. It is second hand. Cheers

Sale withdrawn

1OWRB, you obviously have no idea..thanks for a useless attack and insult hero. this coming from some1 that used a hi-flow on stock ecu and blew your engine, good stuff. Ill keep this for archiving when I run at the 1/4 and get back to you... Cheers Mate

Hi, I can add to your list... 235rwkw at 10-12psi with hi-flow.. -stock injectors -stock afm -stock fuel pump car is auto its got safc exhaust and intercooler. thats it. Do a search for my thread on it for proof of graph and discussion etc..I also did not expect this much power.. Cheers

Hi, Im at work atm but if you do a search on my username I have an entire thread dedicated to it + dyno attachments...if you read it, I only expected about 190rwkw or so hence why i didnt go forward with the usual mods of pump etc. Cheers

I just repeated the post above mine in regards to the added timing, woops. I cant get over ethanol fuel

Its been said bu using the ethonal based fuel will cause yor car to lean out, if modified and not tuned for the ethanol.. Mines tuned on BOOST98, the fuel is cheap and i got great results with it..I think the ethonal fuel was the basis on the surprising power output my car made (40rwkw more then I and everyone else expected and imagined).. The benefit to using ethonal is the timing they can add into the car which = power.

Oh and the fuel economy is shithouse..

Hi, I have 235rwkw@12psi heres the mods; stock auto Stock fuel pump Stock Injectors Stock AFM Hi-Flow turbo (vg30 rear etc) on Stock manifold. FMIC (hybrid copy) Split Dump Pipe wrapped in heat wrap and 3inch exhaust SAFC11 (A full replacement ecu would be better, but this does the job) BOOST98 (ethanol fuel) Pod filter with 2 cold air inductions. Thats it..tuned by HITMAN.. There seems to be alot of variables between diferent cars, as the injectors,AFM and pump are fine. I have been running this set-up now for 5months and the only thing to start suffering is the automatic gearbox. I will be installing a gtr fuel pump soon as it is not a great idea to push the limits of the fuel pump, but it has not hesitated yet. Id also not use the aforementioned as a basis to modify your car though it is an example of what can be done. Cheers

each day i spot so many skylines...at the end of the day i cant remember anybodies...this is in the west of sydney

Id be interested to know about that article if you can scan it..i dont have that edition you mentioned. Cheers

Parts still for sale, prices altered.

A free 10kws is so tempting...the higer the risk the higher the reward, also great chance to be screwed over..

Compressor: - Wheel: 82mm w/ 56 trim - Housing: .70 ar - Type housing w/ 4" Inlet & 2.5" Outlet This turbo incorporates the same GT40 compressor wheel found in the popular GT35, but runs the smaller 60mm w/84 trim turbine wheel from the GT30R. Appropriate for smaller engines where the GT35/40R feels too big, but the high amount of compressor flow is needed for the desired HP. Comes with a large T04S style compressor housing with 4.00 inlet and 2.50" outlet These are the only spec's I could find on it Cheers Peter Whoops still logged on as daughterinlaw

Hi, The exhaust is still on the car atm. I can get a pic soon.. IM in sydneys west, near blacktown Cheers

Fair enough, My point was that they must enforce it for a reason. They need quite substantial reasonable cause to bring in legislation like that.

If yous are worried about punching a cat out cause of the effects to the atmosphere, do not modify your car and get an aftermarket computer which is illegal in NSW as it plays with the emissions, thus effecting the atmosphere. I think a stock cat or hi -flow cat vs a hollow cat is a very free performance gain, especially at higher hp levels. Im sure it could be easily a 5-10kw gain at anything over 220rwkw. Its up to the individual and thier princibles. MY2C

Wind Dimensions for those interest in the carbon fibre insert its 138cm long width approx 20cm

Turbo SOLD

Items still for sale Cheers

Parts still for sale...

Pm replied to

Hi, As per topic heading i have an aftermarket wing for sale. Im not sure what brand it is, though someone did say it looks like a BLITZ item..If anybody can confirm it for others it would be great. The wing is similar to that of a GTR wing, just a bit wider I think. ...........SOLD!!!!!!!!!!!!! Located In Sydneys west. Send Pms for interest and we'll take it from there.

gonna try and get there

All pms replied to. Cheers