MZTRBO

Arr fantastic, thank you for the feedback...guess I was wrong.. Cheers D

Hi, I want to confirm what model these are off, they are off a s1.5 95 r33 gtst. They are different from my s1 headlights. Difference being that they have chrome plating on the inside of the lens cover.. Im certain they are s2 headlights I just want to confirm...youre feedback is appreciated.. Thank you

the car had a wolf3d on it at this stage, and made 242rwkw's. when injectors were changed from the 13bt injectors all issues went away? Cheers Daniel

Damn oh so close..

wont be long...huh

How smart are these theives they say. The possibilty or likelihood of you getting pulled over in that car once a cop see's you is greater then any quick/new/stock vehicle, then their plans are buggered. I'm curious to why they chose a modd'd skyline..sure there any easy target, but so are commondore v8's?? So sad to see that r33, couldve been any one of us...

dead32, first reason I got them for free? Second reason, the car is not going to be a daily driver so ive already accepted the fact that it will idle like crap, the car it was in was tuned to idle higher then normal about 300-400rpm higher from memory and still use to hunt. Thank for all th replys guys it has helped substantially..i think im not going to worry about changing spray patter, I have not even called an injector mob yet so that shows the lack of inititive... Ive actually just purchased an rb25, so no more rb20... Daniel

Thanx for the replys, though I am still curious to see if any one knows if it is possible to get the spray pattern changed??? I will give a few workshops a call during the week, just wanted to see ig anyone had feedback first... Cheers

I dont know was not on my engine... I know it was tuned to the best it could be at the time. It was determined that certain issues were occuring due to the injectors having the wrong/ or a diferent spray pattern. This is as much i know of. I may be able to get a dyo chart for th specific run... Daniel...

bhdave, Can you shed your set-up and issues or advantages with these injectors.. thank you

bhadve, reason to change pattern is because they were one direct squirt and were not atomising properly causing all little problems like not idling correctly.. They were in a rb20 with 242rwkw which has a few issues, changed injectors and problems went away..reason why i acquired them... Thanks for the response, i might do what you suggest though i will look at other alternatives such as changing the pattern first..my plan is about 250rwkw out of an rb20 so I dont want issues straight away.. Cheers Daniel

Hi, As topic suggests I need the 13b turbo 460cc spray pattern changed to the same pattern as what the rb20det 270cc injectors spray at. Does anybody know where i can get this done, or if i can get this done. Any one with experience with injectors or have had it done before. Also is it cost effective. i got the 13bt injectors for free.. Thank you in advance.. Daniel

i dont have the part number with me also.

When I got mine from Nissan when puting my girlfriends vg30 turbo on the rb25 I asked for a gasket for an r33 rb25? Im positive there exactly the same if they bolt on the same. And the the one on there now is holding up. Cheers Daniel

just for the record, you will have to rotate it. I recently put one on an rb25 auto my girlfriends car and all I done was undo a few bolts and put it next to the stock turbo and lined them both up then tightened the bolts again. It is very very easy to rotate a turbo it is not difficult, especially if you have a stock turbo off your car. Its a straight swap on procedure and this turbo is an awesum upgrade. Cheers Daniel...

another thing that i couldnt find, will either of these piggybacks eliminate speed cut etc..????????

mad082, ive looked alot into the ultimate and if buying the blue one or the ultimate brand new the ultimate is definately worth it.

im interested in the previous threads dangerman re: the mv auto shift kits + powerfc...though for now i might stick with a cheap piggy back and a cheap tune.. and with the mv auto stuff, im in sydney and it seems like so much stuffing around. Cheers

Its got series 2 running gear, car is a s1.5. Does the emanage (blue) do fuel and ignition with a generic harness, or is there a reason you need a model specific harness??? Im thinking i will at least pull 220-230rwkw... I can actually get the emanage cheaper then the afc neo (2nd hand)...i think i might go with the emanage at the moment.. Thanx for the replys...keep em coming I have to make a decision soon..i

Hi. 1.I need a piggyback for my Auto R33 and want to no which piggyback is better the new AFC NEO or a greddy emanage....pros, cons. I have researched these already but I want to hear from peoples experience or knowledge on these 2 products..as they are both cheap also.. Few questions re: car setup. these are the following mods.. -Hybrid turbo, r33 hi-flow front and vg30 BB rear -FMIC -3in exhaust, wrapped dump+front pipe Now the car is hitting boost cut or rich and retard mode atm. I have searched for a few things now and am confused with mismatched results.... 2.I no i need a fuel pump, what power will a gtr 33 fp support.....or is there a better alternative for the price. 3.I dont want to fork out for injectors and my question is at what power level do the stock injectors run out or close to 100% duty cycle ....with or without fpr. 4.I dont no much on the turbo but it made/produced 210rwkw on an auto rb20 with oversize valves at 20psi, my question is how much power do you think i could make and what else do i need to support this power level.. I am going to get a transmission cooler for the auto but thats it for the auto... Thank you in advance...

Hi, Just selling some parts to buy a new turbo.... - Dump pipe, HKS copy style. Brand is Xspower For R32 gtst + 3inch front pipe $150 - Rear Muffler for an R32, Xforce 3inch Oval shape with Silencer. (Brand New never been used) $150 - Full Stock Exhaust System for a 180sx, good for clearing defects or compliance including stock cat with A Genie Rear Canon possibly 3inch straight through by the looks of it..$200 Located in Sydneys West.... Pm me for interest... Cheers

SOLD

Located near the Blacktown area

Rather the whole lot gone together. Though make an offer??? Cheers

Also, For Sale (EOI)- TD05-16G Brand New, needs oversized bearings?? $400 Inspection and explanation welcome... T25 turbo $300 Cheers