Jump to content
SAU Community

RB SANDY

Members
 View Profile  See their activity

  • Posts

    353

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by RB SANDY

  1. RB SANDY
    hi how much will you pay for one, pm me
  2. RB SANDY
    It's always a small world if you get a good take off you will do the 12.
  3. RB SANDY
    Hope this helps and a good size for the piping is 2.5" you might go a bit bigger if you are looking for big power and keep in mind a forward facing plenum.
  4. RB SANDY
    will it work with a E-manage
  5. RB SANDY
    I got the info from (meggala.com) it’s in the modifying guide part 2, have a look at the website it has a lot of good skyline stuff on it.
  6. RB SANDY
    Are the Rb20det Sumps and a RB25DET sumps the same.
  7. RB SANDY
    I am interested in the topic any one had a experience.
  8. RB SANDY
    I have a Turbosmart boost Tee I have no problems with it, if you hit the Accelerator hard a 5000rpm it spikes only .5 psi and it is conected after the coola. and is spikeing all that bad. Put it on and try it and if it does spike too much for your likening buy one of those "$22 boost controllers".
  9. RB SANDY
    I know all this info and a nother name for it is R&R and 4.1 v is at 6500rpm thanks for the info it might be helpfull to other readers
  10. RB SANDY
    the arrow goes to the wastegate on the turbo and the other hoes going in to the arrow goes to the intake pipeing
  11. RB SANDY
    also what computer you using you might be able to use the xf one on a aftermarket ecu
  12. RB SANDY
    I dont think using resistors will fix that can you use the rb20 tps at all
  13. RB SANDY
    does any one know the actual volts I know the fuel cut is at 4.1 v and the afm max is 5.1v
  14. RB SANDY
    so will the edge 10w60 be ok for my car its a rb25 and its done 80K.
  15. RB SANDY
    Hi does any one know the AFM volts reading on a rb25det on idle and full load at hi rpm on stock boost.
  16. RB SANDY
  17. RB SANDY
    Buy the way my car is a r32 gtst with a rb25det s1 motor in it. To get rid of the R&R you could cut the sensor out of the afm and put it in a 90mm pipe instead of a 80mm pipe. It could work just a thought, because the ecu thinks the boost is set a 10psi instead of 12. at 10psi the a/f is still rich so it might be for 12.
  18. RB SANDY
    Will it be ok me ringing DR DRIFT on his mob. Does any know the cost of a remap.
  19. RB SANDY
    Hi guys do you know of any one in Melbourne that remaps the stock rb25det ecu because the R&R in kicking in and using a lot of fuel and I don’t have the $$$$$ for a power fc
  20. RB SANDY
    Hi you can put them in a vice and use a wire brush or wire wheel on a drill.
  21. RB SANDY
    Modifying a just jap 600x300x75mm cooler is it worth modifying the end tanks to GTR style I have made a VERY rough pic of what i have thought about, I have access to all the tools and materials I need. Will it be worth the trouble for the amount of flow difference.
  22. RB SANDY
    I have a rb25 in a r32, the power difference is worth it and if a mate can do the loom, also you can not run the std air box because of the std rb25 piping. (200rwkw in a r32 is a 12 sec pass) To get 200rwkw out of a rb20 there is a lot of mods to do.
  23. RB SANDY
    Hi I have a rb20det sump from a r32 gtst. in good shape it think they are the same. in Melbourne, Victoria pick up or post, buyer pays postage. $50
  24. RB SANDY
    bump
  25. RB SANDY
    no std brakes it looks like it tho on the first pic
×
×
  • Create New...