tacker

Updated track action pics

Nice job of fitting the dry sump in there! I did the same thing with a piece of 75mm ducting hose and ran it along the castor arm and had the intake right below the bearing on the end of the castor arm.

Mate the dash is a work of art! Email sent

Aye its got a crack half way across the screen at the moment thanks to a great hunk of rubber thrown up by a radical! Its not a weight loss for the car i was after, But 6 less kilo on a air freight helps! have you ever tried getting parts for a car that was never imported in that country. I tried for months to get a normal screen in Dubai but no chance! But as it turns out they are not that costly 200 pound for a front screen or 400 for a complete car out of the UK. And rest asured it dont rain much in Dubai :-)

Looks like i will be throwing one on the plane with me when i return from PI hyundi getz challenge.

did you blow any fuses ?

i cheated i just did the aluminium bit over the old bushes. Was about 90 minutes of work not sure if the ride will be harsh expect it will be but i could not bring my self to remove the whole craddle for one rotton leaking SOB of a bushing.

make sure the park brake is off when you do the rear set :-)

on the GTR they were aluminium and i got a good set of snips and cut it through...after removing the rotor.

Bugga to the caster i just knew it wasnt going to be as easy as that :-) And i would think you would need the wheels with the weight of the car on them to set it up, bump steer and all that

Guys, any clues on where to get my paws on a polycarbonate front srceen for a R32 GTR?

what about castor? cant get my head around how to measure that

yep i am interested

yes mate it can be done, i did it not easy but do able

Aye Russ it is a thing of beauty!!!! Now just got to get mine sounding like that :-) even the girls in the office thought it sounded great LOL i did play it quite a few times

i was told the same thing about the restrictors ? Arent they built into the cartridge

Well done Russ, keen to see the power figure when its dyno'd

search for G4 or D2 or Ksport

Ok looking for informed estimates now

ok a range of answers then

Guys i did a search but no difinitive answers popped up. what i would like to know is what is the safe limit of boost on a RB 26 engine with about 100k and garret 2860-5 turbos containing stock pistons and rods. regards

Yer he told me that he was going with you to Japan. And your right he seems like a gem of a bloke, he is working on my mates EVO and its now bloody quick. So quick i will have to forge my bottom end to run more boost just to keep ahead of him :-) Yer and a very small world

Russ, do you know a steve from AAT in the UAE? I was speaking with him on the weekend

Cheers, better start looking around then :-)

a quick question do you need to machine the head to run 9.15mm lift cams on a GTR?