Birth

There are stacks of places that sell fibreglass GTR bars to suit a GTS www.justjap.com www.nismo.com.au www.carmate.com off the top of my head.

Master bo bo - that's great, thanks. My last fibreglass bar didn't fit up too well anyhow (maybe a .5 to 1 cm gap)! Yes, both the front and rear guards are pumped on a GTR (or slimmed on a GTS depends on your perspective!). FYI the front guards on a GTR are aluminium as well making them lighter - though the GTS guards are not 'heavy'.

If you come accross one in white let me know!

Hi all, I realised that these are not a great fit due to the pumped front guards on the GTR, but I imagine that it fits up at the front and simply leaves a gap between the bar and the guards. Has anyone looked at this to see how bad it is - any pics would be super. A genuine bar is a much better idea than fibreglass - I had to fix my last fibreglass bar weekly due to the ground hating it! Thanks, Ben!

How far are GTR bars from fitting a GTS. I imagine thet they just have a gap on either side - I wonder how wide - any pics?

I have a passenger side headlight for an R32 GTS, GTSt, GTR GTS4 in good condition. It is a non projector type. $50. Can post at buyer's expense Ben 0434 215 469

Passenger or driver's side? Projector or non projector? I am in Sydney and have a passenger side non projector headlight.

Hi, A white front bar and reinforcement bar for an R32 GTS. Thanks, Ben 0434 215 469

Sticky, how much are you looking for?

Hi - I would like to buy these in good condition. I need both the driver's and passenger side trims.

Rad33, FYI I think that some RB25 owners may be interested in these as the exhaust housing is considered an upgrade to the RB25DET housing. Good luck with the sale!

What car are the rails for? What car didn't it fit into? Thanks, Ben.

Is it a stock or aftermarket horn button that you have?

Thanks guys > sounds like we should have things sorted! I'll let you know what it is when I check it!

Hi all, I would like some advice. I have jacked my car up off the ground and found that I can wobble my rear wheel about 5mm by applying fairly slight pressure with my hands on the left and right hand side of the wheel. It does not wobble when I shake it from the top and bottom. Is this normal? Have I got worn bushes? Tyre wear seems normal. My car is a 1993 R32 GTS4 with stock arms / bushes, GTRGeoff hicas lock bar and whiteline shocks. I have put a (dodgy) pic of what I mean to help with my explaination. Thanks, Ben.

What colour are the skirts? Pics?

Hi West, "I'll contact my friend and see if she's willing to start another one for me, also on the bonnet sticker." I am still interested, is this possible?

Hello, I would like a boot carpet for an R32. I would like to collect it from someone in Sydney. Thanks.

Sorry - I can't tell from the picture are the pods white or silver. Thanks.

West, can you arrange another group buy? Are you able to get the bonnet stickers also at an extra cost?

Bump

Are mould in flares rubber? Do you glue them to the guards?

Do you mean the set of wires that go from the resistor pack to underneath the black cover? Other than that does it all seem OK? Thanks.

Hi there, I have done a search and this is margially confusing so I thought I would recap and maybe someone can tell me if I have it right or wrong. RB20DET. Step 1. Get a timing light. Is the 'normal' type of timing light like the one pictured OK? Step 2. Take the black cover from between the rocket covers off. Step 3. Connect the pick up clamp to the wire that goes to the coil pack closest to the the front of the engine. Step 4. Use the light to guage timing whilst moving the Crank Angle Sensor (CAS) clockwise to retard the timing or anti-clockwise to retard the timing. Any thoughts would be great. Thanks.

I got one for my R32 GTSt/4 from ABS. They have stores all around Australia. The brand is Protec and the part number was JB1431 and it cost $60. Here is a pic of what you get and what it looks like vs the stock one.