foney

bump

Its the new S16 sil, :-P

BUMP!

SELLING ALL STUFF NOT NEEDED. R32 GTR Turbos, good working conidition. $200 for both including dump pipes. GTR coil packs, good working condidion. $70 Brand new hicas lock bar $100 Cheers guys. pics on request Contact VIA PM please

need a crank angle sensor for 32 GTR or anything else that compatible CHeers..

yea, im in the process of ripping the old turbos off to do a better inspection,

few pics of the turbo inlet

computer is power FC, will recheck connections to the z32s, however the voltage is all running good and no probs with them on the hand controller were displayed.

thanks for all the help guys. f**kked rear turbo...

I have read 90% of all posts and have found nothing that matches, Background, Last week i recieved a bad batch of fuel, car ran ruff and got to a point where it didnt start, lots of smoke. I did a complete drain of the tank, pulled out the fuel pump, flushed the fuel lines and the fuel filter then cranked it over a few times to clear any remainng fuel.. put in about 20lts of fresh BP ulitimate as i mannaged to get it running again like normal with boost. Drove to station and got some injector cleaner and drove aroun for 10 minutes, seemed to run ok but kinda still a lil ruff paked it up and left it for the night, The next day i tried to start it again and it now runs again like it did before with the bad fuel, ruff idle lots of black smoke, tried to take it for a drive no luck. stalls and runns ruff and i also then found a noise comming from the intake pipe from the rear turbo, comming out of the airflow meter loude wistle/sucking noise after a lil throttle, massive smell of fumes etc. I had the pods off at this stage. I have newly installed Z32s as well, Im thinking i have F ucked the rear turbo, dunno how, or its a pipe which ive inspected everywhere.. If the turbo was gone then it would still idle corect? Im lost and alil upset, Cheers guys any help would be good.

Brandnew never used HICAS LOCK BAR for R32 GTR, was going to fit to car however its for sale now so the lock bar is going. Got it from Just Jap for 230, percision power 1000watt amp 4 channel. Never had the time to fit it up, had it sitting in the shead for around a year. stainless lock bar, $150 includes postage AMP $150 includes postage. Contact Via PM, Cheers.

sounds sweet, im keen. ill txt him with a message like.. yea mate im keen names brentin have a 9sec GTR in street trim, cash is as good as mine lol... SIF!

your airflow meters are catus. cleaning can only do some much. Replace them with Z32s or standard replacements. It will fix your problem.. It happend to me... Cheers.

more details of the motor please.

Am selling my R32 GTR, details are listed on car sales.com asking 18400, contact via pm or mobile, Location Townsville 0431301801 http://www.carsales.com.au/used-cars/priva...R&trecs=112 copy and paste link to view Cheers

i have the same problem lol, let me know what it ends up being, mine works 4wd just not the gauge, Strange :-S

maybe becuase its a HR32 GTR LOL

-= This is why i dont bother helping out people most times and reasons why alot of other people have lost interest in helping others also, =- Hope that issue gets sorted mate, i seriously thought that it was the earth wire as it was with mine.. sorry i could'nt help out much more.

trying to post up pics :-S take of left plus, tap in another earth line to the yellow wire, earth it up and plug back on, tape it up. good to go..

its very easy mate, you dont need your mechnic to do it. its one simple wire to hook up.. In your boot where the wires for the fuel pump are located.. There are two plugs that hook up to your pump and computer n other things, like the incomfort feature for the standard pump, basicly restricting voltage so its not constantly running, Anyway take the lid off, four screws. Then take the plug off to the left hand side, Then there is two wires, on that plug, yellow and a black with a lil bit of yellow on it.. tap a line into the YELLOW ONE, (new wire) then make it long enough to earth it out, tape it up and your good to go.. It will never fail again. and it will start and run every time. I think it must just be a common fault with 32GTRs the sard pumps, becuase a mate of mine also had the same issue, try it mate and tell me how you went..

ill take pics of how mine is set up if your a bit confused as to what im talking about. PM me if lost

ill bet my car on it

Hey mate, i had the same problem with my SARD pump, u need to make a better earth terminal for it, there is a white wire the goes into the pump, its the earth for the incab noise reduction feature thing. tap in another earth line and it wont affect it again,, Just needs to be earthed correctly,

didnt work mate, ? dont have mac os

So jsut rip it out or just plug the lines up, thanks for the help so far guys :-)