mattis96

should be in as long as no problems with the final tune!

why not use mild steel?

with the new radiator, are you still using the clutch fan and radiator shroud?

$30 posted...

series 1 and 2 are the same for power fc

i use one of those ctek trickle chargers for over 1 year and havent had any problems

standard or aftermarket? as i have a standard one if interested

pretty sure there is a wiring diagram if you search hard enough... if not just do trial and error as i dont see how it would take you anymore than 10 mins to find the right wires?

bump an old thread but would like to also know an answer as searching has failed, my workshop thinks i have a 32 bar in it as i have a 33 and one wheel is majorly out of alignment. So is the 32 bar a different thread pitch?

car is now at rpm performance shop but was told about a 3-4 week wait for tune and custom piping and a few other things. looking forward to that first cruise with you guys as i dont think the misses applause will keep up

why not just do the rb30 bottom end? not alot of extra work for alot more improvement?

i would push it but its about 150mtrs on morayfield rd i need to go down and cross... and its getting to hot to push cars anyway yeah still need it towed, no front bar on it so it should be ok for whatever height to.

Wanna sell the child restraints?

hey guys, well my car finally go's into rpm next friday for its full haltech tune and some custom piping, so looking forward to going out cruising with you guys. Does anyone know of anyone who will do a cheap towe job though, and its literally a 500mtr towe. The local towies want a bit to much. Does anyone have the number of the guy around the morayfield area that is always towing cars on a trailer in a falcon wagon?

also did mine, pretty easy, took about 6 hours including drinking time Clicky Clicky

if you have a dual entry fuel rail can you install the fuel pressure gauge on the end where cylinder 1 will be? as the middle will be the returm and the back will be the feed, thanks and sorry for high jacking.

will take $400, want it gone

can you post up a picture of how you've mounted the power steering resevoir please

So how many things can you T off on 1 line?

Hicas Bar $20 RB25 rocker covers $50 2 90 degree fittings for rocker cover ( good for catch can installation ) $20 each Coil pack cover RB25 $25 Turbo heatshield $10 RB25 exhaust manifold $25 RB25 intake plennum and collectors $40 (i think i have new gasket for the intake to collector for free) R33 gtst rear discs and bendix ultimate pads about 80% left $60 RB25det series 1 coil pack harness $25 r33 passenger seat with rail $30 good condition RB25 dump and front pipe $30 Any pictures just ask but its all standard parts, will send to email address only as phone wont mms. All parts pick up unless you pay for postage, located at morayfield. 0406 038 010 if you want to know anything else, prefer text as i do night shift. Thanks, Matt

i am cancelling my rb30det project at the moment due to sick family stuff that will be taking up a bit of my spare time now rb30 series 2 head and block, blocke will need to be cleaned before rebuilding and the crankshaft pulley is still on engine and it has only 1 head stud that i was unable to remove due to it being already threaded before i started and i made it worse (all i was going to do was weld a nut to the head bolt and remove it that way but never had the time) $100 rb30 water pump brand new in box $40 rb30 mls head gasket $150 rb30 acl race series mains and big end bearings 20 thou oversize $150 for both Oil crank collar $80 2 rb oil restrictors 1 is 1.5mm, the other is blocked $25 Pick up morayfield also have the complete intake manifold, injectors throttle body if wanted with complete package for free, $50 if seperate $450 for the lot!

$450 for the lot!

Will take $5 off all parts listed!

hey mate any pics and would you post?

Aren't the haltechs plug and play and they don't use the knock sensors as well?