700HP-GTR33

Yeah your wrong. This is why I have a Warn,10% under my name. Tuneagent listed them as you have stated Ronin 09. How do you get that warning off? When do I get my 12 points back

With the Poncams 260Degree with 9.15mm Lift responce is better through the low,mid and high ranges. Boost comes in earlier around 4300RPM with the set up I have mentioned. Other cams give you high end power figures only..Some mods to spring,retainers and even higher head gasket are needed with higher lift cams.This is not cheap, check out some pricing and you will see. These cams are only good for top end power delivery,mid range is slightly higher than factory units Poncams also work with standard computer,,,so in Melbourne if you get busted with a Powerfc, there is no problem installing your old computer back.Poncams are a bolt on and off you go unit. But getting back to the original topic.............if you are just after some useable power gains. Buy the -7 or -9 Turbo's get some dumps, throw in the Poncams and you can be expecting to get 280AW kw's with a good tune(even a standard computer)at 1.3Bar. If after all this you want a little more power, then the N1's or ss Turbo's will not take you there. (Unless you spend a bucket-load on the engine.) So the choice for me was obvious, I bought the -5's. These will see me to 310AWkw's

hello, -5's with Poncams,Dumps and Computer will get you your figures you are after. Full boost on mine, without poncams come in at 4500RPM. You wont get those figures with the ss(-9 )or n1(-7) unless you do some engine work. The gt-rs(-10)_ for Rb26 will have to much lag for day to day driving. Hope I have been of some help. Cheers Tekin

Why is this thread not closed yet. This is sexest , and discriminates againsts males . I am starting a new thread tommorrow, "Calling all wanna be women drivers" Just my two bobs worth..... :sorcerer:

Sure the Chinese Turbo's are getting better. Running them on a lightly tuned car with no demands is fine. But if your thinking of further mods in the future, realiability might be a problem. So I agree with Ash, spend the extra bucks for a proven formula . Cheers

Hello, Look at the WORK Meister Wheels offered by Osaka-Boy on the business traders. These are the two piece with the black center http://www.skylinesaustralia.com/forums/in...howtopic=129610 Cheers

Are you 100% Sure it is not your coils. When did this missing start?

Hello, GT-RS Turbo or GT2871R Turbo are priced around the $1450 Mark so High flowing your unit at $2000 as stated is not a good idea. And if you have not spent the money on all the items on your list above, save the money and buy yourself a GTR32. Just my two cents... Cheers Edited for crap grammer

I have been looking for that foryears When you find it let me know where you got it

Hello Arrow, You need to read the RB26 Turbo Upgrade thread to increase your knowledge. GT2530,s with Mods and supporting mods get you Approx. 310AWkw's which is around 360RWkw's. This with no Engine upgrades.....just Tomei Pncams 260 with 9.15 lift. I have then on mine with HKS Dumps and full spool is around 4500RPM. These are the only turbo's you should consider for track-street performance. They are rated at 350HP each. I can get a price on these for you if you like. Cheers Tekin PS .So answer to your question.....your statement is incorrect.

Offset?

Look....I would love to show off my car. But unfortunately I will be out of town from the 4th to the 11th of November. Good luck

Price drop $1610 .........

congratulations........but you need twice as much money now to keep the need for speed on a gtr ....start saving for mods....

55 GTR32's on the wall and if one should drop....LOL It is shyt....

96' GTR33 Garrett 2860R-5(HKS 2530 Equivalents) Hks Split dumps Tune agent manifolds Nismo oil pump Nismo water pump Nismo fuel pump Nismo fuel regulator 700cc Sard injectors Iritop sparks Split-fire coils Trust oil cooler,with relocation filter. Cusco catch can Tomei air intake with Pods 3"Cat, Custom 3" exhaust,3" Resinator with 3" Xforce Hotdog Apexi power fc AVCR boost controller ARC FMIC HKS Cam gears @ 4 Wheels Max Power 260.3kW @7183RPM (1.3 Bar) Max M.A.P 223.6kPa @7055RPM (1.3 Bar) Future plans> Z32 AFMS, Tomei Poncams 260 Degree with 9.15 lift .

Before you purchase them , have a look at the Hankook 107's that are just out. They are going to be the talk of the town soon.

Still for sale.........some one make us an offer that is reasonable.

Can it fit on a gtr33 96.......what do i need extra.

Had car broken into....thief destroyed lock and ignition. Anyway need the boot door, doors with brackets and ignition set LOCKS. OH need the Key for all these aswell....Cheers. I

Another thread that is goin no-where.......frustration... I will repeat it once again....the hero's of this world need some lessons in ... When everything goes wrong,,,,,,,,,,,,,,,,,,,this is what happens.. Take out young drivers to accidents and let them see what they can do with their attitude on the road. Had one pass me,VR Commodore on p'S MOVING IN A HURRY...Maybe to his death.(A legal P's car) Or unfortunately some-one elses death. What a stupid law..... most cars do over 110KM's an hour and many new ones are going to be even faster. Power to weight has nothing to do with why they are killing themselves on the road.

Piercings are cool.... But I would much rather have a bra to hide them... :laughing-smiley-014:

1,000.000 were made so every-one with a GTR32 with MOBIL 05 on the side. Give it to a kid on the street so at least it was worth something to some one. OR JUST , ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, GET OVER IT

Picture please and your location might help aswell. Cheers