Jump to content
SAU Community

andy95'R33GTR

Members
  • Posts

    300
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by andy95'R33GTR

  1. which is better? nistune or powerfc? im confused... =(
  2. what specific ecu will work? will a apexi commander djetro works? reason for installing is upgrade...
  3. yes, I got a stock ecu... I thought it will run on a stock ecu... =(
  4. I got a set of new nismo afm for my r33gtr, and when i swap it with the stock on.. very bad idle.. sometimes engine stops... any ideas why? it will run again with the stock afm...
  5. im running 300-400hp i need a clutch kit.. thanx andy
  6. i got a front coilovers from a hcr32.... hmmm will try this one..if it will run ok with my r33gtr front... =)
  7. hi guys i need help if HCR32 front coilover will fit my front r33 gtr??? thanx
  8. yeah.... i know. last time i only opened the intake cover,, il schedule again to open to exhaust cover to make it sure..the valves are all closed...
  9. i cant see the other valves because its close...but no matter how i turn the cams, it won't shut off, still can hearing leaks...and i wonder why air is going out of the cylinder 1 hole..from cylinder 5 i assembled it again, and my cars runs fine..no problem... hmmm.... i could be losing power of the lost compression...
  10. ok... sorry... i was wrong, my pressure tester, is a mistake, now... i can hear the leaking air but i cant find it... its not on the oil dip stick... its somewhere in the cylinder head... sometimes when i tried to turn slowly the cams, the air will out on cylinder 1
  11. ok... i tried to pressurized the bad cylinder, and my question is, i can't find any leaks... i can't hear anyleaks... =( i tried compression test again, its 90psi, what could it be
  12. opened the valve covered tonight and i will try to pressure the low compression cylinder to check where the pressure in going
  13. thanx for the reply.. =) but the problem of the nistune, i need to get a r32 ecu for it to work, somebody here want to swap ecu? =) and i also need to use a oxygen sensor of a r32...
  14. guys, i know i need to get a powerfc for the bigger injectors, i heard of nistune, can i use this without using the powerfc?thanx
  15. i just removed ang cleaned my fuel pump... black color, is this stock?? what is a stock skyline fuel pump look like?
  16. how many km. should the main bearings replaced? what is the difference of using ACL racings bearings with the stock one?
  17. ok.. can you help me with the rebuild?? =) just here in the form what to do next, and what parts to buy... =)
  18. hmmm i can see from the plug holes...there is no hole in the pistons, if the piston is holed, if won't give any compression...
  19. if the pressure drops..there is a leak..in your fuel supply... could be the cause of piston problems
  20. iv done the compression test with the engine is cold... is this ok?
×
×
  • Create New...