Jump to content
SAU Community

andy95'R33GTR

Members
 View Profile  See their activity

  • Posts

    300

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by andy95'R33GTR

  1. andy95'R33GTR
    i removed the AAC plug, and the RPM dropped, and for awhile i tried re inserting, and the rpm went up and slowly goes down, rpm now is 950-980.. why do you need to remove the plug ???
  2. andy95'R33GTR
    hi, my friend is offering me N1 AFM, but im not sure if i have a stock AFM, what are the numbers on a stock AFM?
  3. andy95'R33GTR
    adjusted the ecu to full counter clockwise... rpm 1170 with a/c 950, is this normal??? bov still not working when i run and tested, when i feel the vacuum of the bov, i can feel the vacuum pressure but when i rev the engine, the pressure is pushing air not vacuum pressure, is this normal? please
  4. andy95'R33GTR
    il try to check the computer...because i think i already adjusted it before...il check again, the acc is already full adjusted..
  5. andy95'R33GTR
    yah...its a stock computer... idle is 1,200 rpm according to my safc ...
  6. andy95'R33GTR
    i read those post...and so thats why i did not clean my my throttles, and i have a safc, air flow is 1.1 throttle position is 0 still, but i haven't run the car for long yes, maybe it needs for heat to lower the idle?
  7. andy95'R33GTR
    anyhelp?
  8. andy95'R33GTR
    assembled already, and first start, idle seems high, according to my safc, idle is 1200rpm is this high idle? AAC is already full adjusted, cannot lower the idle anymore
  9. andy95'R33GTR
    ok sorry...
  10. andy95'R33GTR
    just removed mine... http://www.skylinesaustralia.com/forums/Ex...tb-t295948.html remove the fuel filter, wiper water tank, fuel regulator under the plenum, all the vacuum lines, and the hardest part, remove the tube which go between the plenum, the tube for the clutch vacuum and brake...
  11. andy95'R33GTR
    will this affect bov vacuum not to open?
  12. andy95'R33GTR
    so this causes my BOV not to open??? vacuum insufficient???
  13. andy95'R33GTR
    got a serious leaks....
  14. andy95'R33GTR
    tomorrow im gonna remove my plenum ...and check the gastkets
  15. andy95'R33GTR
    leaks coming from here
  16. andy95'R33GTR
    found this forum http://forums.nicoclub.com/zerothread/351659 having also a leak in tb shaft
  17. andy95'R33GTR
    anybody experienced leaked in there ITB shaft????
  18. andy95'R33GTR
    found another leak, in the ITB front most, leaks in the shaft....
  19. andy95'R33GTR
    i think i found the problem......leaking recirculation pipe
  20. andy95'R33GTR
    this is what i have....no blow-off even when running
  21. andy95'R33GTR
    ok leaks causes low vacuum right? that won't open the bov? so also the clutch booster is defective and the vacuum is leaking there it will also affect the vacuum ??
  22. andy95'R33GTR
    ding
  23. andy95'R33GTR
  24. andy95'R33GTR
    what do you mean by dose>??? my boost is 13psi this is what sound i was looking
  25. andy95'R33GTR
    ok...cleaned the bov...,checked the vacuum lines, still no luck...tried to run the car, and i can hear is the whooooshhhh..., i think its only the wastegates... to be continued tomorrow
×
×
  • Create New...