-SKYLINE-

I reckon a rear camber kit for sure. they are around $150. definatley cast rod bushes - go to nolathyne. just check your rear sub frame bushes too. a cheap up grade for these if they are stuffed is solid ones - around $100 hope that helps

As stated im wanting to fit a R33 GTR fuel pump into R33 GTST and i have found that the GTR pump wont fit in the bracket like the STD GTST pump did. Is there any modification to the bracket that needs to be done? Cheers

interested sent pm

some items still for sale. Offers now taken!

600x300x76 GReddy M-Spec. Very similar to the VSPL but slightly less flow. Wouldnt notice any different unless you had a nuts engine.

Bargains anybody??? I am Open to offers too!!

make me an offer then. These gauges are still available from stores.

SOLD to you!!!

best i could get with out being fuzzy

well i had some splitfire packs out of my RB25 and took them out and put them in my new RB26. On the Splitfire box they say they will fit RB25det RB25de RB26dett

^^^^^^^^^^^ Check these out!

FOR SALE CHEAP CHEAP!! Offers are invited!! GReddy Front mount Intercooler with Piping to suit RB25 - Hardly used, Perfect condition less than 1000k's through it. $600 GReddy Electronic Gauges x 3 - Oil Pressure - Exhuast Temp - Oil Temp - No sender units. FREE Gauge holder to suit EVO 6 $250 will not seperate RB26 Coil Packs Standard - 70k's on them. Should fit RB25 as well? $60 set 3inch (75mm) Front pipe for RB25 - made by Exhaust Technology. To bolt up to low mount turbo. exhuast sensor included $180 R33 GTST Front rotors 296mm x 2 - 30mm thickness $50 R32 GTR Braided brake lines -front and rears - Less than 1000k's track use - straight swap from standard $240 SPOOL Adjustable Cam Gears to suit RB20 RB25 RB26 - Anodised blue $150 Pair! Can post at owners expense! Grab your self a bargain and help me clean out my garage!! For Photo's check out http://www.skylinesaustralia.com/forums/in...=0#entry3280493

FOR SALE GReddy Front mount Intercooler with Piping to suit RB25 - Hardly used, Perfect condition less than 1000k's through it. $600 GReddy Electronic Gauges x 3 - Oil Pressure - Exhuast Temp - Oil Temp - No sender units. FREE Gauge holder to suit EVO 6 $250 will not seperate RB26 Coil Packs Standard - 70k's on them. Should fit RB25 as well? SOLD 3inch (75mm) Front pipe for RB25 - made by Exhaust Technology. To bolt up to low mount turbo. exhuast sensor included $180 R33 Front rotors 296mm x 2 - 30mm thickness $50 R32 GTR Braided brake lines -front and rears - Less than 1000k's track use - straight swap from standard $240 SPOOL Adjustable Cam Gears to suit RB20 RB25 RB26 - Anodised blue $150 Pair! Can post at owners expense! Grab your self a bargain and help me clean out my garage!!

WANTED Standard or after market intercooler and piping to suit GTR and Front pipes - standard or AM Located in Adelaide Pm me or sms 0409901365 Cheers

I have just taken out the rB25 and put in a RB26. So i was thinking of just keeping every thing fairly standard and then there is no headache.

As is said im after a GTR intercooler with piping for exchange with a GReddy Item with piping thats 8 months old with less than 1000k through it - to suit RB25 - paid $899!!!! so you getting a bargain! PM me or sms to 0409901365 URGENT!!

Well done to all those that competed yesterday. Level of drifting has improved a hell of alot. Sad i wasnt out there................ but will be once i get this damn motor in........ look out fellas!!!

Hey Just wondering if anybody knows where to get some intercooler piping for R33 RB26 coz this is the last thing i need to get before its finished. I cant use STD piping as im using a GReddy item. I had a quote from ASE and they reckon between 600-800$ ????? Way expensive for to bits of pipe!!! Cheers

Hey Just need some advice........ I have just got my RB26 in and am ready to put it into my S1 R33. Problem............. The motor is out of an R32 GTR and the have Square engine mounts rather than the round ones on R33. I have been told that by putting RB25 mounts on over rides this problem. Can some body clarify this for me?? Cheers

Hey Well my motor has finally arrived after its long 4 month wait from Japan.!! I just have a couple of questions that need to be cleared up.... 1. Do the engine mounts need to be changed as i have noticed that the 32 have different angles than 33. 2. I have changed the timing belt but i set all the cam markings up along with the crank marking but when i get to tension it it pulls one of the cams off its mark by about 2 degrees. Is there any way of avoiding this or is this ok?? Cheers...... any OTHER help greatly appreciated!

cheers i'll go down and buy the puller i think!!!

Just replacing the timing belt on a RB26 and having trouble getting the Crank Pulley off..... Any ideas ??? Cheers

cheers mate i checked that out. now i need to find some one to do the work!

Hey As i said before i have just recieved my motor after 4 months of waiting and im looking at changing the GTR system to 2WD. I bought my self a RB25 sump to bolt on as i have been told that they will bolt straight up. On removing the transfer case i noticed that the RB26 oil sump and system was far better designed than that of the RB25. So this is what im possibley thinking........... getting the transfer case taken off of the sump and welding or putting welsh plugs from where the shaft was. Hence better oil flow and larger oil capacity!! Thought and ideas.................... Any one know where i could get this done?? Cheers Adam

Hey guys Just wondering if any one has an aftermarket intercooler piping kit to suit RB26 and they wanna sell or know of where i can get one from. I have just got my motor in yesterday and am wanting to use my GReddy intercooler that was on my RB25. Any help greatly appreciated. Cheers Adam