13thracer

.

stock r33 wheels all tyres are below legal tread but not on canvass two rims are in immaculate condition look like fresh from factory other two are fair conditon. $170 ONO Scott 0403 530 367 brisbane southside

Sold sorry people, will let people know if sale falls through but doubt it will,

have received a few offers through pms, it says 1000 firm and we all know what these turbos are good so the 1000 firm is firm its what it cost me all up to get it done.

one vg30 single turbo high flowed by slide, is the max oversize version its not the OP6 housing but it is bigger than the rb25 housing so ill let you do the math on how many kw its rated too. All information on the turbo can be found in slides section. turbo is still in the box that it came in, from slide never been fitted selling due to change of plans. $1000 (firm) with oil line and banjos that have been modified. brisbane 0403 530 367 Scott have received a few offers through pms, it says 1000 firm and we all know what these turbos are good so the 1000 firm is firm its what it cost me all up to get it done.

on the southside, birkdale

bump looking for swaps

i use one of these in my silvia read the manual a few times they are a little tricky to set up at first but once you get the hang of it its an awesome controller a higher offset will increase the boost faster so try turning the volume knob down alittle to compensate its hard how to explain how to use these things so just keep playing until you get it leave the offset at 100 or less and use the volume knobs to set your boost level and get it spot on then start playing with the offsets to make it boost harder..

go the black cooler, and personally i havent had any issues with a can black job i painted mine with a can and cant fault it havent looked at my inlet temps through my microtech but my mates wrx who also painted his with a can of black saw no change in inlet temps from when it was shinny (monitored through his microtech) during the day it is the same and at night has seen his inlet temp drop into single figures.

ignitors also cause this issue maybe swap it over with a mates one,. every one has a mate with a skyline these days

nope not ebay not going to say anymore until i get some sort of response.

yeah looks like them and am thinking they are na sr20 ones, hoping the guy will DO THE RIGHT THNIG and take them back as they are not what i was sold they are even fully serviced now. thanks guys for your help

hi i recently bought what was meant to be 6 15 injectors now i had them cleaned today and they only came out to a rating of 300cc they are side feed and are terracotta in colour everything looks and was told they were s15 but accrding to the cc there not part numbers on them are : A46-00 0F554X31 Can anyone shed some light on this topic please

Well my high flow arrived so its time to sell off the stock one its a series 2 turbo It has done 80000ks no shaft play doesnt blow smoke hasnt seen more than 12psi (since ive had it cant speak for previous history) currently still on my car if your in brisbane you can come over and see it in action before you buy will be pulling it off saturday to fit my high flow (if evreything goes according to plan). Just the turbo itself no elbow lines or actuator $350 Scott 0403 530 367 Brisbane (Southside)

bump

drop to $1100

pms replied and bump

i have a set of 33 GTR rims in very good condition only one wheel with slight gutter gash very little tyres have 90%tread 235/45/17 kumho ecstas' on one pair and about, 15%tread 245/45/17 potenza G3 on the others all legal conditon ready to go looking for $1100 for the lot or swap for some other wheels ideally 32 gtr rims with cash adjustmwnt depending on tyre conditon thanks Scott 0403 530 367 Brisbane

BUMP $130.00

i have a bosch 044 fuel pump for sale can handle big horsepower up to 700 apparently was running in my silvia intank was way to big for what i need so i bought a walboro instead works perfectly is a genuine bosch pump not a cheap chinesse knock off been used for the last eight months hasnt missed a beat. $130 ono south side brisbane 0403 530 367 Scott

out of interest does the pod have the top of it sort of blanked off (no air goes in the top just the sides) like you i had pod issues too with the crapy K&N have a look at the apexi power intake take a good look at the diagram on the box or on the web, of how the air enters the pod and how it goes into the AFM it creats less turbulance with air flow. i noticed it drove and went smoother after fitting a apexi than the K&N which when in comparison was just nasty, try a power intake and you will be pleasatly suprised.

my old post for your same issue may help, the problem would come and go for me but in the end with the stock 25 in it, it was the intercooler piping causing my issue. maybe you are special like i was, the previous motor in it was meant to be a 25 until it went bang and when i pulled it down found it had 26 internals with massive cams hence the too munch exhaust flow out of a stock 25 turbo. id be hoping to be special http://www.skylinesaustralia.com/forums/in...=133869&hl=

does your cooler pipeing have any nasty bends or size changes in pipe i had the same sort of thing which tormented me for 6 months before finally figuring out it was the pipe work. just my experiance with this issue hope it helps

did you block off the vct feed on the head

they are the same mine is a series 2 motor with all the series one stuff on it differences are CAS inectors cams half moon on end tps ecu coils blah blah blah all shit you allready know so man up and buy a dam 30 block any way hahahaha do it