T8834D

pic 2

pic 1

cheers 4 the photo's i will take some photo's of mine as it is a little differnt.

i come from perth and i have a r30 hatch l20et, its white auto and has power everything. it also says turbo in big letters down the sides of the doors.

i had a similar pro b with my l20et when i got it all i did was used my tig to build up the stud untill i ca just wind it out with a set of multigrips. i have also used the mig to do the same but its a little harder you have to make sure you get peno with the first bead. if you dont have a welder a easy out is your best bet but its a bugger of a job... good luck.

sweet cheers 4 the reply... the reason i am looking at injectors is one of mine has a crack in the body an dis weeping, not long and i willhave a fire lol. if i get a set of e15et vg30et l28et or a 7m do ihave to change my ecu? are they the correct impedance? can i put em in and adjust the afm? thanks Blake

hi guys i have cruse controll on the r 30 but i dont know where to hook up the vac lines off the comprossor thingo?? can anyone please send a photo or tell me what has to hook to what..

cheers 4 the reply so i have to use a l28 ecu if i use e15 injectors as well? why dont they run a dropping resistor like a l24? my injectors are fine but number 5 is weeping from a crack in the housing and i need to find a replacement.

i also should add i have a set of l24 injectors (but i think they r too small) can any one sudgest any injecotrs other than e15et and vg30et?

hi guys i need some info on the l20et injectors, i beleve they are onley 190cc ? can anyone tell me what a ca20e or rb30e injector size is? thanks Blake

rsx84 please tell what tail shift you used??? did ya use a dr30 one or 240k?

hi guys i have 3 gtrs with big single turbo's black line racing gtr with a hks 2.8kit and its running a hks to4r a wiite r32 gtr with a trust 2.7 kit and a hks t45s a black r32 with a hks 2.8kit and a t8834d they run injectors ranging from 740cc up to 1000cc i would like some advice on aftermarket ecu's 4 em. my preferance at the mo is 4 power FC dejetro (spelling) but any advice would be helpfull. thanks Blake

any of you guys swaped the steering box front end 4 a rack seutp? i am nearley ready to put my front end back and i am having no luck findoing out what is the go. i think r31 skyline must be close but the rack may be wrong 4 the r30 and make her bump steer.

use a hammer and chisel. make notch in the nut then wack it undone! failing that use a pencil grinder to cut part of the nut away. best of luck!

i just looked at my l24 head and its a n47is this as good as the n42? the l20et head is a 05L is this orig.