Zas)-(

ohh i see i see, so the pfcs oready have a base map and can be tuned also from paulr33's instructions... nice, i will most likely get it all installed together at a workshop ( garanteed work ) and then drive it off boost and cautious to thre tuner ( maybe 5 mins away )? i was talking to a bloke at tune house, seems to know what his doing with the power fcs? thanks agian guys

hey guys cheers for those that helped me with the oil bracket issue got another thing ere i been wanting to fit in my z32afm s15 injectors, bosch 040 and turbo for long time now, yet if i get somebody to put em in or do it myself yet without changing the ecu it wont run and even if i plugged in the new apexi thats coming.. how would i get it to a tuner with all the mods without damaging the car???? am i suppose to get somebody to install them and tune it at the same place? or do the work in a garage and tow it to a tuner?? i do not want to wreck my car or the sensors.....

hi do you have the oil filter bracket/housing? its join onto the oil cooler and its 4 bolts off the engine

hi, where u located ? and would the lsd fit a series 1?

it was the mechanic,. we used the claw device u find in repco and the strap on oil filter so we have tools to take it off not some cheap oil wrench from kmart. but these tools usually arent required most are done by hand. ...i reckon the bolt broke because of so much heat.. like manifold studs break i reckon the bolt was going soon too from pressure n heat.. hahaha wheres ur car kinks i'l lsend some1 to take good care of it

no way its only got a bolt of lcm popping out of the actuall bracket thats left we are trying to get the bolt out but no way cant do anything for it... yeah we could try a heat gun , we dont have to remove the actual oil cooler from the filter bracket itself?

its split in half.... maybe an inch is left inside and then the other half with the nut and bolt.. oil relocation ? its a bloody tough job , to change the whole thing, how long would replace it usually take. oil relocation kits approx price wise and reliability what would be the better option? p.s what would be the better option we've already taken the 4 screws out but its not comming off is there a sealant or sumthing that we have to remove ???

deadset? i was hoping for them to maybe weld a bolt onto it but its so close to the fuel lines n all arghh.. expensive job...!!???.

did u try looking into the r33 service manual??? it has usually everything maybe even diagnostic codes???

Hey guys just tried doing a service .... oil filter was abit hard to turn ... after alot of effort and few tools my oldman squashed the filter removing it but also broke the BOLT that the oil filter screws onto.. now there is half a bolt left inside the oil pump thing where the oil filter fits into and half we have in our hands..... what do we do to get da oda piece out or.... how should we go about this now? put in da towel and get a mechanic to look at it or what? cheers

ok heres my 2cents in a barrel of technical words from others have u tried putting in ngk bcpr6es or bcp7es ? ( i dunno can some1 correct me on the part numbers if wrong? ) heat ranges can also cause miss fire in plugs? so maybe by using the bcpr7es it could be alot better den da v-groove get da ones already pre-gapped to 8mm so e.g bcpr7es-8 <--- like that.. if im wrong den u onli wasted 23 bucks. or bcpr6es is what i use and hittin up 12psi .. so goodluck man...

mate honesty im keeping to a plan and the plan of a stand alone engine management doesnt come into view untl october at least .... i just want to keep things simple just wanna know what i can use to tune them without a stand alone engine management, wasting dollars is not the problem i can still sell it later on and go overseas

hi guys just wanted ur guys oppinion on whether you can get air/fuel controller, or any pggy back systems to tune aftermarket injectors??? can use an safc or another fuel adjuster to tune them??? i do not want to opt for an aftermarket ecu atm ...

aahhahaAHHAAH LIKE ASS really? ahh good answered my queswtions thanks guys

what would the symptoms be of a z32 afm on a stock ecu that isn't tuned for it?

r33 series one turbo air flow metre in good condition got 2 for the price of one from wreckers !!! so selling ONE it woks well so yeah asking for around 80 bucks but offers taken ... cheers

aiming to hit around onli 270 rwkw so was gonna just get 550c ones

which injectors are possibly a great for performance yet also good on budget.. dont mind spending at money just not over 700 ......anything cheaper is good but whats brands n stuff are recommendations

i just cleared my defect same one a week ago best thing is trying to get a muffler at the end with a silencer and see if that quietens it down but opt for expensive mufflers that does reduce sound no china made crap. otherwise either way you'll lose power.... maybe other guys have ideas but its a bitch

lol well im no bloody mechanic but from what ur saying most probably you shaved the head and thus its hittin on the head.. replace it to stock head and see what happens mite fixed your problems , maybe put a gasket to increase the height as the pistons would be clamming the head.. thats my idea... whoever shaved the head did too much... remember mechanics do onething without giving thought on what the effects or strain would be on the other side of the engine..

Hey guys just took some coil packs out of mates car his selling, his cars hit near 87000 kmz with these coils before upgrade. selling them for 100.00 bucks postage at buyers expense cheers any got offes just pm

DOES ANYBODY HAVE A STOCK CAT???? need by tonite... if anybody does in sydney please pm me or call me on 0406097038 price negotiable??? or can lend??

hi how much wold u be settling for just the frame of the gearbox e.g the leather and the plastic covering? and also the handbrake leather? and do u have any badges left i would realli like a skyline S badge

pm sent

hey guys need few items for my car need * gauges ( aftermarket if anybody got any spares or dont use ) * leather gear boot ( leather that goes around handbrake and the gear stick ) * skyline badge r33 series 1 badge.... ( silver or red prefereably red but will be happy with any ) please send prices of any thanks