CRACKD

phone call returned

Complete Running Gear to suit R32/33/34 GTR This running gear was to be used in my street/strip R32 GTR but as this will no longer be happening the entire setup is for sale. The aim of this setup was to run a 9sec 1/4mile on slicks in a full street trim car. Nissan RB26 Long Engine with RB30 Bottom End $11,000 - This engine has been rebuilt with forged internals aswell as been modified to hold 600rwkw, it has also been adapted to suit the 4WD sump, engine hasn't been used since being built. Inspection welcome. OS Giken 5 Speed Cross Mission Gear Set $5500ono - This is a R33 GTR gearbox rebuilt using a new OS Giken gear set, synchros and bearings. 3540 High Mount Twin Turbo Setup $6000ono - This is a used and recently inspected turbo setup, it comes complete with turbos, manifolds, wastegates, dump pipes, front pipe, intercooler piping, oil and water lines. Good condition. Hi-Octane RB26 Sump $1800ono - This is a brand new sump un-used since being modified and has also had the diff rebuilt with all new seals etc. Picture's speak for themselves. Trust 4" Drag Twin Entry Intercooler $1200ono - This is a used intercooler but is in good working order and has been pressure tested and was given the all clear. Fuel System $1700ono SOLD-AWAITING PAYMENT - This consists of Sard 800cc Injectors, Sard Fuel Regulator and Trust Billet Fuel Rail all parts are brand new and never used. WILL NOT SEPERATE Ignition System $1100ono - This consists of SplitFire Coils and HKS DLI Type 2 Ignition module, the coils have done 5000kms and the HKS DLI is brand new. WILL NOT SEPERATE Aluminium Radiator $700ono - This is a Ron Davis radiator it has been used for 5000kms and has been pressure tested and was given the all clear. RB26 Inlet Side of Engine $1000ono - This is the standard inlet side of an RB26 consisting of plenum, throttle bodies and injector block and fuel rail the entire assembly has been cleaned with the plenum, injector block and fuel rail being chromed as shown. The throttle bodies have also been rebuilt with new bushes etc. WILL NOT SEPERATE RB26 Rocker Cover Set $650ono - This is a standard RB26 rocker cover set that has been painted also comes with a Trust clear timming cover. WILL NOT SEPERATE Exedy Twin Plate Clutch and Flywheel $1000ono - This is a used twin plate clutch with 5000kms on it there is still plenty of meat left on the pads, the flywheel has been machined and ready for use. This is a pull type clutch. Surge Tank $250ono - This is a brand new unsused 1.5lt surge tank with base and fuel pump clamp. Trust Greedy Oil Catch Can $200ono- This is a brand new unused catch can comes with eveyrything need to connect it up. If anyone is interested in buying the entire setup please call me to discuss. Location: Sydney. Payment: Cash on pickup. Shipping: Not offered pickup only or willing to drop off to local buyer. CRACKD Sam 0419818795 - If i dont answer please send an SMS or a PM Picutures will be uploaded soon.

Prefer sydney location have money waiting.

Need to find out what the torque rating of a Trust/Quaife 6 Speed Dog Box if anyone knows, reason I am asking is I want to use it behind an engine other than an RB26 which will create more torque hence the question CRACKD

pm sent

PM Sent

Does the VH41DE you got come with an alloy sump?

whos your engine builder?

500rwkw? I think you need to worry about more than just rhe lifters

Thats what I thought

Out of curiosity I read somewhere that if you were to use longer rods and a custom piston to suit in an RB30 the engine would like to rev more due to a decrease in speed of the piston at the top of it travel and also a longer rod reduces the angle at which the piston pushes again the thrust side of the bore which I can see may reduce the chance of splitting a bore as I have heard is common in alot of HIPO RB30 engines. I am interested to hear people's opinion on this

Selling due to changing to a JUN plenum. Details are: 1) RB26 Plenum has been cleaned and chromed 2) Throttle Bodies have been cleaned and rebuilt 3) Injector block which is the part that sits between the head and the throttle bodies has been cleaned and chromed comes with matching water log. 4) Fuel rail has been cleaned and chromed. As stated these parts will suit an RB26 in a detailed engine bay. Coating and rebuild cost me over $500. Price is $1000ono. Parts are located in Sydney, freight can be arranged at buyers expense. Pictures will be up shortly. CRACKD [email protected]

okay it seems that they are forged, so what prepping to people do? as stated i want to build a Rb26/30 and turn it to 8500rpm with a target of 900hp

Hmmm, I would like this clarified please

Intended use is a street/drag egine in a GTR. Want to make 800-900bhp and turn it to 8500rpm

Just wanted to know if they RB cranks (RB26 and RB30) are forged or cast? I would also be interested in knowing what people do to prep them. CRACKD

Why you selling it?

Thanks, I want a bare block and crank so i can inspect them and would prefer someone local

Post updated

As stated in the topic, must have standard bore size without damaged bores. Also need the matching girdle. Also after a RB30 crank in good condition with standard size journals and no damage Please PM or [email protected] Located in Sydney

Good pump? What options does one have? As far as I know it is the N1 but that is only good for constant high rpm

This doesnt seem to be a complex modification as the only parts needed from what I can see are: Extra Outlet on radiator Braided Lines and Fittings Reservoir mounted on strut

If the smoke is worse only when it is cold then im 99% sure its your pistons, it will get worse and worse until it lets go

Seems that your engine has suffered cracked ring lands, time for a rebuild if you were going to upgrade the engine now is the time CRACKD

For our top fuel Optimax Extreme which is a 98+ ron with ethanol we pay $1.50 a litre