_MRR33

Any pictures of the SAFC 2? Whats your lowest price?

I haven't gapped them at all so they should be 0.8mm then - however is it possible one or two may be slightly out?

Sometimes I feels like it's poping and farting then like you said just pulls itself out and revs out to 7000RPM-7500RPM. I'll regap the plus when I can, prob next day or two and see if that will fix the problem. I'm using Irrudium plugs, they were around $25ea. Well, what I'll prob do is check these plugs and see if that fixes it, if not may be the ECU. I'm running stock boost, I have no other mods at all besides what I listed in the first post. I just went for a run and I noticed it kind of struggles at lower speeds also?

You could well be right there. I had the AFM and fuel pump both tested and they were fine. We bought it down to two problems - Coil Packs or ECU. I got new coils for them because they always break down in the S1 GTST. So, that does leave the ECU which is standard by the way. If that is the case, how do I go about fixing it? By the way, thank you very much for your help and Merry Christmas I didn't gap the plugs at all I thought they would have been fine, you're the second person to tell me to check the gap on the plugs. I'll have to do that. On the R33 GTST what should they be gapped to? By the way, thank you very much for your help and Merry Christmas

Edit: I've now noticed it will do it when I'm sitting in park or even when taking off slowly seems like its missing Hey, I seem to be having a few problems with my RB25DET, it usually runs fine no problems at all but it seems to struggle on load. What I mean by load is if I'm sitting in a low speed and give it a bit when it gets anywhere between 4000RPM and 5000RPM it sounds like it's hit rev limiter and struggles for a moment or two then push itself to 7000RPM-7500RPM which is rev limiter. At higher speeds such as 100-110KM an hour and you give it a bit it's not as bad but it still has a very similar affect. I'm not too sure what the problem could be, I've put the engine on a diagnostic program and it came up with no errors. I've had the car rebuilt within the last few months, I've done all the running in etc, I'm running good oil (Royal Purple), good spark plugs, I'm using 100RON with 5% Ethonal (V Power Racing) - however I haven't had it tuned since the rebuild - may this be the problem? I've tighten everything that I think may have come loose. Any help would be greatly welcomed. Engine Mods Include: - K & N Pod Filter - Cold Air Intake - Forged Pistons - Strengthen Conrods - Blueprinted - Balanced - Port Polished - Metal Head gasket - Spitfire Coils - High Performance Timing Belt - High Performance Spark Plugs - Greddy Turbo Timer

Has anyone used these before, are they any good?

You've started early, how many have you had? We're not leaving until 8PM, meeting at 7:30. Have some water and a sleep Better not, just in case you are over the limit still.

Doesn't look like theres anything planned tonight so I thought I might as well organize a cruise to Broadwater Car Park. Please post here if you are going to come, and any Northsiders are more then welcome to organize a meeting spot at Aspley Hypermarket and meet is at Springwood at 7:30pm. Once we do get to Broadwater Car Park, if people want to do something from there we can organize something. Hope to see a few of us out tonight! First Meeting Spot: Springwood Crazy Clark's Arrive: 7:30PM Depart: 8:00PM Sharp Second Meeting Spot: BP Yatala Arrive: 8:20PM Depart: 8:45PM Sharp Third Meeting Spot: Broadwater Car Park Arrive: 9:10PM Things to Bring: 1. Full tank of fuel 2. Camera P.S: You don't have to be a pimp or a ho to attend So, I'll see you all there! Everyone is welcome!

Huh? This is the QLD Section

Hey, A few mates and I will be heading into the city for a random cruise, so everyone is welcome to come We will all meet at Springwood Crazy Clark's at 7:30pm and leave around 7:50pm. Hope to see some of you out tonight!

Price? As per rules

$200 May be a bit steep, as I noticed when trying to sell mine. I actually have mine bar for sale for $120 now @ http://www.skylinesaustralia.com/forums/in...howtopic=148092

PM Sent.

Price Drop on Steering Wheel and Coils.

Just the wheel, not the boss kit - sorry. Thanks, It is pretty cheap though - like you said.

That's what I thought, and people were telling me it's the Type M bar. Thanks I'll update that now

I have a few parts for sale. I'm pretty firm on the prices but I am open to offers, I am located in Brisbane's Southside willing to post however, at buyers expense. Item 1: Sports Wheel $120 Now Only $100 Item 2: Stock R33 Front Bar $120 Item 3: R33 Standerd Coil Packs $120 Now Only $100

I just rang them, and you can change the plate up until the final payment. No cost.

Sorry! I won't be changing it again after this one - only because I've had my plates changed. I'd like GTS793 Thanks!

Hey! I’ve just got a quick question about PPQ.com.au – I’m not sure if anyone will know but someone might have done what I am trying to do. If not, I’ll just give them a call in the morning. Anyways, I put some personalized plates on layby a couple of days ago I’m still waiting on the letter to arrive around two weeks they said. However, I’ve had a change of heart and would like to change the plates to something else, is there a fee to this? Thanks

As long as it's boxed, you'll be fine Welcome to SAUQLD

All PM's replied too. Still for sale.

Mmm.. I'll take any reasonable offer!

I need this stuff gone, I am sending a bunch off stuff early this week and would like to send it all at once. I'm open to any offer!!