ezi09s

i absolutely HATE hyundais, but thats a nice car man

pull harder

possible, but not really easy. the dash sorta curves at the top the the ac goes, and ud have 2 chop it... other than the cosmetic work, yes u cud

did he re connect the plumb back hose correctly? if not thats the problem!!! if it isnt on properly the engine will run weird and the bov opens on idle, causing the rough idle (running lean)

they are good, but unless your ready to do a bit of plumbing, it may not be worth the head ache

pm sent

pm sent

can you say setup

i have the old apexi rsm, the black version. no instructions tho

make sure you have the vaccum line to the solenoid properly connected, as their is 2 ways to do it. for an internal and an external gate....

pm sent.

dont spin the wheels!!! lol serious tho reduce wheel spin by dropping the clutch as a normal take off, and just gas it. anything other than this usually ends up spinning the wheels... turbo lag does have its downsides

my car was doin the same thing, ended up being 4 pistons with detonated ring lands.... bad bad bad... fuel cut wasnt workn, and the newly fitted gcg high flowed turbo was over boosting something severe... 3rd gear pinging burnout= dead motor.. do a compression test, and if the cylinders are uneven, or way below 160-170psi (recommended compression) you have probs!!!!

ok its a side entry exit, what you need is a hybrid style kit, or similar fitting kit i dont have one but at least ur 100% sure wat u need now...

side entry exit? or crossover?

wat cooler is it? they all use different pipng, eg, side mount, cross flow etc

would you take 200 for the turbo???

dont bother, it will break 20 boxes are shyte

ok 4 sum reason i cant upload, so il try n explain it. the top pipe goes to your solenoid, and the other pipe goes to a "t" peice. this then goes to the other side of the solenoid and to the manifold. comprende?

look at the attached image for an easier explaination. external gate wasteext.bmp

is it an internal or external gate?

in both cases, electronic or gated, you can run a hose into the dash. a 2m or so added length to the hose wont affect the performance etc.. turbosmart sell a 2 stage in cabin unit, which has vaccum lines from the wastegate to the cabin, then to the manifold. that short of a distance should do nothing

how much mate

as it says above, im after an agp 2/4/8 card anything better than a tnt2 m64 : i know i know, any things better, i just need it for the weekend. dont wana spend anythn more than say $50 pm me if you can help me out!!!

my guess is it only does the sound when the pedal is depressed??? its probably just the new thrust bearing bedding into the clutch fingers